Boat motor of Russian production: review, description, characteristics and reviews

Boat motors of the USSR, Russia are in great demand around the world. The main producers are the companies "Whirlwind", as well as "Strela". The power parameter of the models is very different. Tumplings in devices are often installed manually. The connectors are of a transitional and step type. The peculiarity of models of early versions is considered to be a reinforced pallet. Dedwoods are installed with or without switches. It is also important to note that modern devices are equipped with high-quality impellers. In order to understand this issue well, one should consider the most popular models and understand their advantages.

Description of models "Nara"

Boat motors of the Russian production "Nara" reviews, as a rule, receive positive character. Among the features of the modification, it is important to note a quality stepped connector. The vertical shaft in this case is set to 2.3 cm. The maximum power of the boat motor is 13 kW. The water pump is not provided by the manufacturer. It is also important to note that the apparatus uses a small impeller. According to buyers, the device of the provided series is remarkably suitable for fishing vessels. Are these Russian-made boat motors (market prices) in the region of 11-12 thousand rubles.

Overview of boat motors "Whirlwind 32"

This boat engine has many advantages. First of all, buyers note the high stroke of the piston. The limiting power of the device is 10 kW. The driving pinion of the model is designed for heavy loads. The fuel consumption of the motor is small. The starter is applied with a spring. If you believe the reviews of buyers, then the drive shaft is not very common. The traction of the block is not provided in this case. Deadwood is of the classical type. The gearbox is missing from the model.

The cooling system of the motor of this series is of the water type. The rod retainer is used with a wide flange. Many buyers say that the tiller is controlled normally even at high speed. The reverse gear is missing. Spring is used with a pump, and the stem is connected to the impeller. The screws of the model are of high quality. It is worth the modification on the market in the area of 16 thousand rubles.

Characteristics of the models "Vortex 33"

This boat motor is made with one impeller. If you believe the reviews of buyers, the stroke of the piston reaches a maximum of 44 mm. The stock rod is not provided. The starter is used with a mechanical switch. The tiller of the model of this series is managed quite comfortably. It is also important to note that it has two gears. To switch gears apply deadwood. The propeller is located in the lower part of the structure. The stove above the deadwood is capable of withstanding heavy loads. If you believe the feedback of buyers, then the pump is designed for a lot of pressure. The pull of the block is absent in the model. Directly the spring is located under the deadwood. It is worth in our time model in the area of 13.5 thousand rubles.

Reviews about the devices "Strela"

This Russian-made boat engine is distinguished by a high deadwood. In this case, the reducer is provided with a holder. If you believe the reviews of buyers, then the switch works fine. For small boats, the model fits perfectly. However, it is important to note that the motor has a short tiller. For large waves, the controllability is significantly reduced. The starter for the modification is of the contact type.

The switch is next to the gearbox. If you believe the feedback of buyers, then the impeller is removed without problems. The front gear of the motor is made entirely of stainless steel. The water pump for the model is rated at 2 bar. A propeller shaft is used with a head. Deadwood has a model with a quality spring, and the pallet is provided with a lock. It is worth in our time, a similar motor for boats in the vicinity of 13 thousand rubles.

Description of the models "Breeze"

This new Russian-made boat engine has fairly high parameters. The power of the modification is 13 kW. In this case, the stroke of the piston is a maximum of 35 mm. The tray in the device is protected by a wide plate. The driving pinion is located under the lock. The fuel consumption of the engine in this series is low. If you believe the reviews of buyers, then the propeller is capable of withstanding heavy loads. The tiller is designed for 3 bar.

System from overheating at the motor is available. Connector manufacturer provided stepped type. No gearbox. Lockers for deadwood are used with a switch. The spring of the model is applied with low conductivity. She does not have traction of the side. These outboard outboard motors of Russian production are worth more. Prices fluctuate around 14-15 thousand rubles.

Motors "Neptune 23"

This Russian-made boat engine is made with a long tiller. The clamp in the device is attached to the rack. A model of this series is installed using a pallet. If you believe the feedback of buyers, then the motor is controlled without any problems. In this case, the connector is of the step type, and it is switched on by the adapter. Directly the latch is fitted with the pull rod. If you believe the feedback of buyers, then the water pump is designed for high pressure. The drive shaft is used with a diameter of 2.2 cm. Deydwood is quite compact. The specified engine costs about 13800 rubles.

Characteristics of Neptune 25 models

This Russian-made boat engine is manufactured with a drive-type spring. The tiller of the model is connected to the rack directly. If you believe the feedback of buyers, then the connector breaks very rarely. The clamp is in this case under the counter. The latch retainer for the motor of this series is absent. The stem of the gearbox is not provided for the model. The impeller in the device is used rather broad, and the pallet is well protected. The pinion of the drive shaft in diameter is exactly 3.4 cm. The motor costs about 14,400 rubles.

Reviews about the devices "Neptune 30"

This Russian-made boat engine stands out as a wide rack. In this case the pallet is protected by a plate. The limiting power of the modification is 13 kW. In turn, the stroke of the piston is not more than 30 mm. The tiller is designed for high pressure. If you believe the reviews of buyers, then the starter is configured quite simply. The connector has only one modification. The clamp is attached under the tiller.

It is also important to note that this boat engine uses a quality lock rod. Deadwood is on the support. The main shaft in diameter is 1.3 cm. The motor overtemperature protection system is provided with a water type. The impeller is not widely used. The model of this series is worth about 13.5 thousand rubles.

Description of the models "Volgar 15"

The above-mentioned outboard motor of Russian production is very popular in the first place because of the high rack. Also, the model uses a qualitative stopper. If you believe the reviews of buyers, the starter is removed without problems. The connector in the device is of a step type. Directly the impeller is located behind the fuel pump. The pallet is protected by a plate.

Deadwood at the motor of the specified series is used with an overlay. If you believe the reviews of buyers, then the starter is configured without any problems. The stem of the gearbox is made with a holder. If we talk about the disadvantages, it is important to note that the model has a weak shaft support. The water pump in the device is not designed for high pressure. The impeller is provided by the manufacturer with a steel flange. The drive shaft in diameter is only 1.2 cm. Buy the model of this series can be priced from 13,200 thousand rubles.

Overview of boat motors "Volgar 23"

The specified motor is produced with one holder. If you believe the reviews of buyers, then the tiller in the device is managed very well. However, the model does have drawbacks. First of all, the owners complain about the small stroke of the piston. The retainer is provided with a short rod.

The drive shaft in the device is used without traction. The gearbox is not provided for the manufacturer's modification. The springs in the model are not designed for heavy loads. The driving gear is used with a diameter of 3.3 cm. The starter in the device is used with a manual switch. In this case, the clamp is installed without a handle. It is worth the motor of this series in our time no more than 15 thousand rubles.