Mormyshki own hands. Mormyshki on perch with own hands

For every true fisherman, every detail of his equipment is important. For example, what is a mormyshka, not everyone knows. However, without it, it is difficult to imagine a fishing process. And it is this rig that constantly clings to branches and algae, breaks away from the line, is lost. That's why almost every fisherman can do mormyshki with his own hands, and in emergency situations, you can make from different materials. It is worth noting that the creation of even the most simple mormyshki must be approached responsibly, because this, in general, depends on the whole catch.

We use casting

Making mormyshk with your own hands by casting is probably the longest method. On the other hand, this method allows you to cast precisely such mormyshki, which you could catch a lot of fish. That is, molding makes it possible to create copies of these small details, while several pieces can be prepared at once, so you will be sure that even if you break the line you will not be left without a catch. For casting, lead and form will be required. So, if mormyshki is very small, then you can use a form based on epoxy resin, for larger products, the gypsum form is best suited. And you can do with children's plaster, from which crafts are created.

Matchbox is also a form

To cast mormyshki with your own hands, you can use a matchbox, which will serve as the basis. It is filled with a gypsum mixture consisting of one part of sweetened water and two parts of gypsum. Components should be mixed thoroughly, so that the mass resembled sour cream in consistency. The box should be filled to the brim, and the excess should be removed.

We take mormyshku, which we will repeat in the casting, and we lower it into a thick soap solution. After drying, mormyshku should be immersed in a cast in half. That it could be easily pulled out, it is necessary in the corners of the box to load two pruning, for example, the straw from the juice. We are waiting for 15 minutes, until the gypsum has solidified, we spread the surface again with a soap solution. We take another box and fill it with a mixture of water and gypsum, on its surface the first box (in it a mormyshka) is turned over and connected. After the gypsum withers, the boxes can be separated from each other. In the empty space formed in the box, lead is poured. It is worth remembering that when it is heated, moisture will evaporate from the mold, so the gypsum form can crack.

Aluminum mold: reliable and durable

To create mormyshki with your own hands, it is best to use aluminum molds. For example, in this way you can create a tackle for catching fish such as lenok. To catch it you need a fairly large bait elongated shape. To create it you need to use copper or brass. If the nozzle is large, then the hook should be soldered at an angle to the mormyshke, and the hook is best taken with a notch.

It is easy to use the finished aluminum mold. First, a hook is prepared: it is necessary to remove all unnecessary ones. The hook and wire are correctly placed in the mold, after which it closes tightly. The melting process is just as simple: you can use a small side dish with a spout, since it is convenient to pour lead. After the product is cooled, it must be removed, processed to remove unnecessary parts and rubbed with a sandpaper. In such a simple way, many fishermen create mormyshki with their own hands.

Mormyshka without attachment: what is it and why?

Many fans of winter fishing increasingly prefer to fish in a so-called non-irredent way. Thanks to him, the process of fishing becomes more interesting, exciting, and most importantly productive, because you can catch a fairly large fish, as well as fish that do not bite on bloodworms, larvae or burdock moth. Untreated mormyshki with their own hands are created very simply. For example, it is possible to use as a basis a tungsten pellet, which has a long hook projection. A petal of brass, nickel silver, or silver is soldered to it. Find these materials at hand is not difficult, the main thing is to competently solder them. It is best to do this by servicing, since glue or epoxy compounds in such gluing will not help.

Features of winter fishing

Catching tackle is the dream of every fisherman. Since in the winter the fish is much more actively looking for food, homemade winter mormyshki should be performed in a special way. You can choose from several manufacturing options.

1. Of tin and lead. Such details for fishing are loved by many, because they are made simply. So, you just need to drop the solder onto the hook to form a pellet or droplet. When carrying out the soldering, it is worth remembering about the hole for the line, you can use a needle, a nail or wire that can be easily removed after the solder has cooled.
2. Mormyshka-wire is another invention of those who like winter fishing. It is created simply: at the fore-end of the hook, wire, copper or brass is wound evenly. The beads or cambric beads are hung on the hook itself, thus the mormyshkas are obtained for the perch with their own hands, which are used without attachments.
3. A special place in the arsenal of any fisherman is occupied by mormyshkas made of tungsten. Due to the optimal combination of weight and density, they can be used both at great depths and in strong currents. Mormyshku of pure metal can be made with a mechanical groove, but to solder it to the hook, you must first cover its surface with silver, brass or copper.

Mormyshka per perch and grayling: what to choose?

Mormyshki on perch with their own hands can be created by casting. The second option is the use of the cambric, which gives you a very catchy tackle. For this, a cambric, a tube (preferably bright color) and a wire are taken. By the way, the heavier it is, the more weight will be mormyshka. Cambric and wire must be cut at the same level as the length of the hook's forearm. After that, the hook is cut into the kembrik, where it is tightly fixed with the help of a wire. Such homemade elements can be used for winter fishing.

Catching grayling correctly

Mormyshki on grayling own hands Are created in approximately the same way. Catching this fish for natural bait is a very fruitful process, but it is also quite troublesome. Therefore, many start looking for ways to trick this fish into deception. To create a bait for grayling, you need to find a suitable hook. To him soldered mormyshka in the form of a ball, preferably of pure silver, filled with tin. Tin will not get dark in the process of exploitation, and silver is a metal that visually looks like a bubble in the water. For the soldering process, you need to use a tungsten needle. This is our foundation. With the help of multicolored threads or feathers, nodules are created that stretch onto the hook. You can supplement your tackle with a pen, which is first cleared of all unnecessary things. All this harvesting will serve as a bait body. To make it shine and shine, you can cover it with varnish, after which it is good to dry. That's so simple, albeit a little troublesome, you can make your own fishing tackle with your own hands.

conclusions

Apparently, modern fishermen use fantasy to bring home as much as possible catch. It is very easy to create mormyshki with your own hands, it is enough to use improvised materials and to be able to handle a soldering iron.