Miter saw with broach. Saw the crosscutting combined

Miter saws with a broach are used by builders to cut the workpiece. In this case, the design of the device allows you to choose the angle. The main material for the work is a tree or aluminum. However, it is easy to saw plastic and laminate.

Features of miter saws

All miter saws are distinguished by a high speed of rotation. In this case, the place of cutting will always be very neat. All this makes it possible to use this tool in assembly, as well as carpentry. At the same time, some use it to finish the room.

In addition, saws can be used in furniture production. Still often they are taken into service by enterprises producing windows. This is largely due to the high quality of cutting metal profiles. The discs at the miter saws are extremely durable.

How is it arranged?

The crosscut saw with a broach consists of a protective casing, an engine and a handle. At the base of the device there is a bed with a turntable. Under it, you can see a ruler that allows you to set the angle. In addition, in the miter saw there is a longitudinal stop for fixing the workpiece. The installed casing protects the person from the rotating disc. In turn, a crosscut saw with broach, made by hand, is not safe. Many manufacturers install asynchronous motors on devices. However, many prefer a collector device.

The first option will allow you to work with the blank absolutely noiselessly. In this case, asynchronous motors can last for many years. Collector devices are much noisier. However, they are easy to maintain and do not require periodic inspections. In general, the location of the engines may differ greatly from one model to another. Most often, manufacturers install the engine in the rear. At the same time, it does not seriously hinder the working process. In addition, in this situation, a person has a good overview of the workpiece.

Choosing a quality miter saw

The correct choice of saw directly depends on its application. For home use, you can think about purchasing a simple modification. At the same time, an extensive functional part is not so important. The situation with professionals in the field of construction is different. In this case, you need to look at absolutely different models.

The power of the miter saw should not be less than 1800 W. In addition, attention should be paid to the casing. With it, you can safely work with the device without risk to health. Another nuance is the size of the device. Large and heavy miter saws can have good characteristics, but they are absolutely not comfortable in operation.

If a person plans to work continuously for a long time, then you need to select a compact model. This also takes into account the ergonomics of the saw. The handle should be comfortable, and the workplace should be clearly visible. Last but not least, the buyer should pay attention to the drive of the device. Basically, it is selected based on the diameter. The acceptable value is 20 cm.

Saw "Metabo KS 216M"

Consumed power this miter saw with the broach "Metabo" has a whole 1.3 kW. At the same time, the idling frequency is 5000 rpm. The diameter of the saw blade is 216 by 30 cm, which is quite comfortable. The depth of cut at an angle of 90 degrees is 60 mm, and when the angle is reduced to 45 degrees, the depth drops to 45 mm. The maximum cutting height is 120 mm. Adjustment of the bevel angle in this model is provided.

In addition, it is possible to control the tilt of the device. The dimensions of this miter saw are quite acceptable. The length is 475 mm, the height is 465 mm, and the depth is only 285 mm. The mass of the device is 9.4 kg. These miter saws have prices in the area of 6400 rubles.

What is the difference between the "Corvette 4-430" miter saw?

The miter saw "Corvette" is a good indicator of sawing a billet. The power supply voltage is from 220 V. The power of the collector motor is 1800 W. The disk has a diameter of 255 mm. It is produced with carbide tipped. The size of the disk is 30 mm. At the same time its thickness is 2.8 mm. Directly on the disk there are 40 denticles. The spindle has a diameter of 16 mm.

In addition, manufacturers have taken care of the branch pipe, which is necessary to connect the chip blower. In this model, its size is 37 mm. The cross-cut is 75 by 430 mm. Rotation of the barrel during operation can be adjusted from 0 to 45 degrees. The pitch of the saw blade is also set in the limit from 0 to 45 degrees. Transmission in this model is mounted gear. The oblique cut at 45 degrees is 75 by 305 mm. At the same time, the engine speed reaches a maximum of 4800 revolutions per minute.

The transport dimensions of this miter saw are quite impressive. Its length is 830 mm, height - 520 mm, and depth - as much as 415 mm. The mass of the device is 21 kg. In addition, it should be noted good indicators of longitudinal travel. Still manufacturers have taken care of qualitative extenders of a table. Replacement of carbon brushes occurs quickly enough. In general, this miter saw has good reviews. The cost of it on the market is about 9500 rubles.

Saw "Makita LH1040"

The power consumption of this saw is 1.6 kW. At the same time, the voltage is at 230 V. The frequency, in turn, is 50 Hz. At idle speed, the disk makes 2800 revolutions per minute. The diameter of the saw blade is 260 by 30 cm.

With an angle of 90 degrees, the depth of the cut is 130 mm. In addition, it is possible to connect a dust extractor. The depth of cutting the workpiece at an angle of 45 degrees is 85 mm. The total weight of this saw is the mitered combined "Makita LH1040" has only 14 kg. Its cost in the market is 15,000 rubles.

The new model "Makita MLS100"

This miter saw with a broach is able to boast a fairly solid construction. At the same time, the cutting accuracy is very high. The bevel is about 0.2 mm. Horizontally, this miter saw with a broach is able to rotate by 45 degrees. In this case, it is possible to clearly fix the workpiece in a certain position.

In the vertical plane, the slope of the saw is 45 degrees. Also there is the possibility of a sharp braking of the engine. This system is equipped with a special safety switch. A screw is provided for adjusting the depth of the cut.

The connection of the miter saw to the vacuum cleaner is quite simple. The diameter of the carbide saw blade is 255 mm. The power consumption of the device is 1.5 kW. The voltage is 230 A, and the frequency is 50 Hz. The thickness of the saw blade is 30 mm. At idle, he is able to make more than 4000 revolutions per minute. Depth of cut at 90 degrees is equal to 130 mm. The total weight of the device is 14.7 kg. These saws are priced at around 14,000 rubles.

Crosscut saw for metal "Makita 2414NB"

This model is best suited for working with metal blanks. At the same time, it can boast of precise cutting. Most often this miter saw is used for cutting cast profiles. In this case, it is possible to work with non-ferrous metals, as well as steel. The spindle is fixed by the manufacturer. Replacing the grinding wheel is very quick and easy.

The casing is made quite qualitative, therefore during work of a risk for health is not present. This is largely due to the unique shape of the casing. The carved disc is closed from the person from all sides. In addition, there is a quick-action clamping device. Adjusting it is stepless. The cutting angle can be changed from 15 to 25 degrees. The handle comes complete with built-in. In general, the model is very simple to transport.

Model "Makita LS1018L 6400"

This miter saw with a broach is produced with a laser marking suspension. The handle has a good shape and grasp is quite comfortable. Manufacturers produce them completely rubberized. Due to this, the disk is very easy to control in any position.

The angle of the miter saw in the horizontal plane is 45 degrees. The power consumption of the device is 1.4 kW. The voltage is at the level of 230 V. The frequency of the model is equal to 50 Hz. In addition, a good idling speed should be noted. For a minute the disk makes more than 4000 turns. The diameter of the saw blade is 255 by 260 mm.

The possibility to connect a dust extractor is available. The total weight of the model is 19.9 kg. The device for fixing the depth of cut is provided. Also, manufacturers took care of the security system. To this end, they installed a quality cover. The cost of this model on the market is 22,000 rubles. In general, this model can be characterized as universal. It is perfect for both large enterprises and small workshops.