Manual seeder with own hands

A manual seeder can be an excellent assistant when carrying out work on the territory of your site. Such a design can be purchased at the store, but it will be cheaper to produce it yourself. The scheme of this design is very simple, in addition, by manufacturing it, you can make your own changes. The device has a reservoir for seeds, as well as a handle. Quite often the design is supplemented with a steel device that resembles a stick. The seeder can be multi-row or single-row. In the example, a variant of a single-row construction will be considered.

Preparing Before You Begin

If you need a manual seeder, then for its manufacture you need to prepare some tools and materials. Among them, a seed container can be distinguished, which preferably should be made of plastic. It can be an ordinary bank. The use of a plastic product is convenient for the reason that it is transparent and allows you to control the number of seeds.

You will also need a bolt, which will perform the function of the axis. On it, the seed bank will rotate during the use of the device. The manual seeder will be manufactured using a plastic pipe, the length of which should correspond to the depth of the can. You should also prepare a steel tube, the diameter of which should be less than the plastic tube.

It will be necessary to use washers for securing the jar. To fill the seed banks inside you will need to make a window. The door can be made using cans made from canned food.

Stock up and a piece of aluminum wire. In order for the hand-held drill to be easy to use, you will need to prepare a wooden handle for it.

Features of the device

To avoid difficulties in the process, it is necessary to study the technology of work. On the bank should be noted center. Marking is needed to drill a through hole. The accuracy of the assembly will determine the stability of the entire device. Next, remove the lid and make in the side another one through hole, which should have a rectangular shape. It will be needed to enable the seeds to fall asleep. To prevent their rash, it is possible if a steel valve can be prepared from a steel can, the dimensions of which should be larger than the hole. This element will act as a lid.

Assembling the structure

A precision seed drill must be manufactured according to a specific technology, which in the next stage requires the attachment of a prepared valve using an aluminum wire. It must be done in such a way that it is possible to open and close the window.

In the central part of the jar you need to place a plastic pipe, which will eliminate the rash of seeds. In the plastic tube should be installed steel. In this case, you will get a unique bearing, thanks to which the bank will rotate when moving forward. When a precision seed drill is being made, a long bolt is inserted into the steel pipe in the next manufacturing step. It will need to be tightened with a nut, beforehand having located on both ends of a bank of a washer. This will ensure the design of the possibility of free rotation.

Recommendations for the implementation of work

When a manual seeder is made by hand, you need to make notes with a pencil on the side of the container. Remove them from each other by 3 centimeters. Beforehand, a hot nail should be made holes, when choosing a nail, you need to take into account the size of the seeds. Naturally, if small holes are used, large seeds will get stuck. On this we can assume that most of the work is done.

Handle making

To strengthen the handle, a hole must be drilled at the end of the wooden element to install the bolt. Then this workpiece is attached to the drill. At the next stage, it will only be necessary to ensure that the seeds found in the soil are covered with earth. This will automate the process.

A manual seeder with its own hands can be supplemented with some elements. Among them we can distinguish a chopper, which must be made of a piece of steel. The billet needs to be bent so that soil can be raked easier. After that, the prepared chopper should be fixed on the handle, placing a little above the jar. That's all - now you can use the tool.

Another option for making a seeder

A seeder for carrots can be made using a different technology. This process is considered somewhat more complicated. To work, you need an aluminum tube, the diameter of which is 28 millimeters. On it you need to prepare holes by placing them in three rows. Now you can proceed to the manufacture of seed tanks.

To do this, use galvanized sheet steel, the thickness of which is 0.5 meters. This element will be a box of 80x70 millimeters. The height of this tank is 40 millimeters. The lower part, which will be intended for seeds, should be made in the form of a trapezoid with an opening. All joints must be sealed.

At the next stage, the hopper is attached to a frame equipped with wheels and a handle, bolts, and also a screw. One of the screws will act as a detent for the brush, which is located in the lower part of the body. With its help it will be possible to correct the density of sowing. A seed seed drill can have a lid made of plexiglas. This will allow you to easily control the number of seeds.

The lid should be fixed on the front of the hopper, using the furniture loops for this, it is possible to provide this element with a latch in order to be able to leave it in the closed state.

If you follow the recommendations presented above, you will be able to make a design that will allow you to sow seeds in a very large area in a short time. This will speed up the work and save time.