How to make a skate yourself

The stores are full of skateboarding boards, but is there the one that fits perfectly to your requirements? There are doubts. That's why many are interested in the question of how to make skate yourself. Often skateboard does not from lack of finance, but because of the need to obtain a unique board, completely suitable for the individual preferences of the owner and his physical characteristics.

Choosing the most high-quality and expensive board, you can not completely eliminate the need for adaptation. Why adjust to the characteristics of the skate, if you can create a unique board and tailor it for yourself!

Doing skate yourself: where to start

We'll figure out how to make skate at home. The presence of knowledge of design features and responsibility is the first thing to have, starting the design. Answer the questions about why you need a skate, what size it should have, what modification will work best.

You need to clearly formulate answers for yourself, because you will start from them, forming a design scheme. Purchase of parts is better performed in a specialized store, and the skate itself is collected according to the instructions, if you purchased a ready-made assembly kit, or use the recommendations for self-assembly given in the article.

Create a skateboard with your own hands

How to make a skate from a set purchased in the store? Very simple. This method resembles a game with a designer: you have a complete set of parts and all the necessary tools with which you need to assemble the elements, in the end you will get the desired design. This method of construction is the easiest and fastest, but not always from factory parts, adjusted to a certain format, you get a comfortable skate.

Step-by-step instruction for assembling a skateboard

To build a complete vehicle, follow these steps:

1. Attach the skin to the board: it should fit tightly and evenly to the wooden covering. Air bubbles formed under the skin can be removed, but you will have to wait until the workpiece dries completely.
2. Trim and treat the edges of the skin after it has dried. After that, prepare the holes for screw fasteners.
3. Puncture the sealed holes in the factory board with an awl.
4. Assemble the wheels by filling the inner space of each of the wheels with the provided factory parts in this order: bearing number 1, bush, bearing number 2.
5. At this stage of assembly, install the washers, which are attached to both sides of the board.
6. After you have finished the work with the washers, tackle the wheels and complete the assembly.
7. Additionally, adjust the damping system.

Following the assembly instructions, you will be able to figure out how to make the skate step by step, and create a full-fledged vehicle suitable for training, skating and honing new tricks.

A board from scratch, or how to assemble a skate from improvised materials

To assemble a skateboard is not worse than a factory product, even from what is at hand. Are you looking for the answer to the question about how to make skate at home by yourself? We'll find him!

It is much more difficult to complete such an assignment than to assemble a vehicle in the form of a skate from blanks, but it is quite feasible.

In this variant, the assembly scheme discussed above is completely duplicated, the only difference is that you will have to manufacture the details for the skateboard yourself.

So, how to make skate from scratch. To begin with, you need a deck of a tree consisting of several layers (at least seven). Before sizing the board, calculate the parameters of the future product, make measurements and cut out the workpiece. Then grasp the glue.

You can cut the board according to the ready-made template, but rather design a unique product according to your drawings.

The problem with the absence of the factory skin is also easily solved. Replace it with a dense sandpaper, the principle of gluing which is similar to working with the factory material.

The only thing that still have to buy, it's suspension and bearings. To assemble a skateboard at home, the set of factory parts # 608 is very suitable.

If you have everything you need, you just have to collect a board of your dreams, give it a unique design and go to conquer new heights. Hence we can conclude: if there is no suitable model for sale, there is nothing left to do about skate making it yourself. In this there is nothing complicated!