Lacquer "Tikkurila" (yachting): photos and reviews

Lacquer "Tikkurila" yacht is a modern alkyd-urethane composition. It dries quickly after application. This mixture is used for varnishing wooden surfaces outside and inside the premises, which makes it universal and in demand among consumers. The area of use of the composition are boats, windows, furniture, as well as doors and floors. After drying, the surface has a semi-glossy gloss. Many users really appreciate this product and are advised to purchase it for various jobs.

Reviews about the protective properties and areas of use

Lacquer "Tikkurila" yacht has components that can slow the impact of ultraviolet on wood. The formulation formula provides high wear resistance, and also allows you to wash the surface frequently. The base after drying becomes resistant to lubricants, vegetable and animal fats, as well as chemicals. According to users, wear-resistant varnish is able to preserve the original appearance of the parquet flooring even in the case when you often resort to wet cleaning.

With this mixture, you can protect the window and door frames from fading. According to users, yacht lacquer prolongs the life of furniture, and its semi-glossy gloss accentuates the natural beauty of the material. After the paint "Tikkurila" yachts will be applied to the surface of the vessel, its base becomes resistant to wear and moisture. As practice shows, this mixture can be used for processing boats and boats. The boards will be protected from cracking and rotting. This applies to both cabins and decks.

Reviews about technical characteristics

Lacquer "Tikkurila" yacht can be applied to surfaces that will be subjected to moderate chemical and mechanical effects during operation. The mixture reliably protects materials that are used in adverse climatic conditions. According to buyers, over time, the varnish does not crack. He continues to possess excellent decorative qualities. The mixture is water resistant, and the drying time between layers is 24 hours.

As a diluent, you can use white spirit. And for the application you need to apply the spray method or the usual brush. Clean the tool after carrying out the work will be possible with the same white spirit. As the buyers claim, the yacht lacquer "Tikkurila Unique Super" is used at a temperature of not less than + 5 °. At the same humidity of air should not be above 80%. It is noteworthy that this composition is able to withstand transportation and storage at low temperatures.

Reviews about the main properties

Yacht varnish "Tikkurila", reviews about which, perhaps, will allow you to understand whether it is worth buying this mixture, is made in Finland. It belongs to the premium class. According to the home-made craftsmen, the average consumption of the composition is equal to one liter. It will be enough for 12-14 m ² . The mixture is colorable. It can withstand washing after drying with standard detergents. Among other things, the layer is resistant to vegetable fats, as well as gasoline.

According to professionals, this varnish can be applied to houses, gazebos, log cabins, fences, terraces and open verandas. The materials of the working surface can be made chipboard, parquet, fiberboard or wood. Dilution can be up to 20% by volume. You may be interested in such characteristics as density and dry residue. They are equal to 0,9 and 38 respectively. Apply to the surface of 2 to 3 layers.

The cost of varnish

Lacquer "Tikkurila" yacht glossy is sold in different volumes, depending on this, the price will change. For example, for a capacity of 0.9 liters the consumer will have to pay 650 rubles. If you need a volume of 2.7 liters, then you will give 1750 rubles. The manufacturer offers for sale and 9-liter canisters, which cost 5210 rubles.

Recommendations for use

If you decide to use the yacht lacquer "Tikkurila Unique Super", the reviews are important to read. Of these, perhaps you can understand which technology is best to wear the compound. Before use, the varnish must be mixed, and to form a primer it is necessary to dilute the mixture with white spirit. Application should be carried out with even thin layers. If necessary, the application of the primer layer can be discarded, but only if the base was previously varnished. The surface must be dried and lightly sanded before applying the next layer.

Reviews about the features of the application

Yacht varnish "Tikkurila", the instruction for use of which is presented in the article, should be applied only to pre-cleaned surfaces. According to users, this will increase the adhesive qualities of materials. If you want to work with especially valuable or exotic wood species, then their surface is pre-wiped with white spirit. Sometimes the base has a varnishing layer, which must first be checked for flaking fragments. In this case, all poorly retained elements must be removed, and after washing the surface with a special solution, which is called "Maalipesu."

In addition, the surface in the preparation phase is then washed with water. If you performed the grinding, the dust formed should be eliminated. On previously non-varnished surfaces, you can apply a coat of primer antiseptic, which you can find on sale. It is called "Valti Pochyuste". The agent is especially necessary for bases that will be exposed to the negative effects of atmospheric phenomena during operation. It is important to control the level of moisture in the wood, which should not exceed 20%.

According to buyers, it is not recommended to start work if the surface is exposed to a bright sun. The same applies to rainy and wet weather. Yacht varnish of the floor "Tikkurila" will reach the maximum degree of wear resistance after two weeks. If you want to use the tool and after carrying out work on applying the described tool, it should be thoroughly washed with white spirit. If it is necessary to use the varnish in the future, it should be stored in a tightly closed container. Only in this case the composition will not lose its initial qualitative characteristics.

Additional recommendations on the use of lacquer

If you decide to cover the wooden floors with yacht paint "Tikkurila", then you can additionally prepare the surface. For this, the base is slightly moistened, and then left to dry completely. Raised wood fibers must be removed manually using sandpaper. It is important to exclude the presence of polished dust on the surface with a vacuum cleaner or a mop.

In some cases, the floor in the room requires the alignment of cracks and small depressions. In this case, it is best to use wood shpaklevkoy. It is very important to choose the tone of the material to the shade of wood. If you notice large gaps on the surface of the floor, then they should be covered with a dowel. The aligned areas should be left until completely dry. After they have to be treated with sandpaper, again removing grinded dust with a vacuum cleaner or a damp squeegee.

Conclusion

It is important to remember that the "Unique Super" is absorbed into the putty surfaces differently than to other bases. This can be expressed in a change in the final color, which is quite often uneven and does not satisfy the consumer. Such zones should be carefully freed from building dust and other contaminants. But if it comes to large areas, it is only suitable industrial vacuum cleaner.