Isoplastic vapor barrier: characteristics

The vapor barrier isoplastic is a multilayer coating created on the basis of polyester and fiberglass. When it is manufactured, the technology of bilaterial application of binder is used. The latter contains all kinds of polymer additives and concrete.

Characteristics of the isoplast

If the roof is equipped with an isoplastic, it will serve for more than 25 years. The composition of this material contains special polymers, which give high stability at an impressive temperature range. Thus, the roof covering can be operated under conditions that are characterized by a temperature range ranging from -10 to +130 degrees. Due to this characteristic, the described material is used in all climatic zones. The vapor barrier of the isoplastic has a high plasticity, which excludes the appearance of cracks in the bends. That is why this material can be used in the arrangement of roofs of different configurations. Thanks to the polymer component with an isoplastic it is possible to work even when the thermometer's column drops to extremely low temperatures. You can count on biological stability, among other things, the material excludes the germination of plants through the roof. Even with a negative effect of the external environment, the polymer does not change its initial characteristics for a long period of time. Due to this, the canvas does not dry out, does not become glassy during use, and does not lose its strength. The vapor barrier isoplastic is famous for its ease of laying, which even an inexperienced master can cope with.

Minuses

Each material has its positive and negative sides, among the latter one can allocate an impressive cost, which quite often forces consumers to choose alternative solutions. However, if you calculate the costs that are spent on repairing the roof, which are inevitable when using other coatings, then perhaps your choice will fall on the isoplastic.

Styling Features

The vapor barrier isoplastic is easy to install, but before using it, you still need to familiarize yourself with the technology of the work. Before going to the store you need to determine the amount of materials that will be required for manipulation. Experts recommend buying an isoplastic in an amount that is more than 10% of the required. Installation of the coating can be done in one of two ways, the first of which is cold, the other - hot. The first option involves the use of bituminous mastic, while the second involves fusing and using a burner.

Recommendations for work

Roofing material isplast is stacked in several stages. To begin with, you should perform preparatory work, which includes cleaning the roof of debris, as well as dust. It is important to get rid of cracks, chips and other defects. Further on, the primer is applied, the bituminous composition can be used as a primer. This material is disclosed, but it is important to try to avoid overruns. To begin with, the fitting is done, and then the roofing knife is used. The roofing of Izoplast provides for the laying of a lower layer, where only the P-coat can be used. It is necessary to heat the surface and material, and then gradually and simultaneously make the stowage, ensuring tight clamping. The top layer is fused using a coating of grade K. The technology remains the same as that described in the article above.