Is it worth buying an expensive soldering iron for polypropylene pipes

Recently, polypropylene water pipes have been increasingly seen in the domestic sanitaryware market . They are well proven in the US and Europe, where they showed an amazing result. In domestic homes, they are installed relatively recently, but now we can say that these are very reliable and high quality pipes, which, if properly installed, will last very long.

When mounting, a special soldering iron for welding polypropylene pipes is used. Its heating tip is a plate on which special nozzles can be fixed. It is thanks to it and the density of the attachment nozzles transferred heat, which heats the pipes. Soldering irons for polypropylene pipes usually have a fairly large number of nozzles, although it is enough to have them by the number of the most common pipe diameters.

The nozzles are metal couplings made of thermally conductive metal coated with Teflon. Couplings are made in such a way that they can be placed on the inner diameter of the fitting and the outer diameter of the pipe. The soldering iron for polypropylene pipes heats the end of the pipe and fitting, after which they are connected, applying a moderate pressure.

Welded in this way, the connections are very reliable and qualitative. They withstand pressure even greater than a conventional pipe. In the entire water supply system, these connections are the most reliable and safe. Faster leakage is caused by the fault of the pipe or even the metal tap, than because of the weld break.

It should be noted that the soldering iron for polypropylene pipes is fairly simple to use. With small skills and an understanding of the whole process, even an amateur can use it. At the same time, for qualitative work, you only need to know the time and temperature, which is necessary for melting pipes. Some people prefer not to trust the digits and readings of the soldering iron, so they just do some test connections, which adjust the temperature, and measure the duration of the heating.

A conventional soldering iron for polypropylene pipes is a fairly simple device. It only contains a conventional heating element, which is connected to the heating regulator. Therefore, on sale you can find quite a large number of these devices of different designs and from different manufacturers. At the same time the price for them can be different.

Many plumbers believe that by buying a professional soldering iron for polypropylene pipes for a lot of money, they will be able to work more efficiently and efficiently. However, considering the design of the device itself, the same simple job will be handled by the simplest soldering iron for polypropylene pipes. At the same time, the quality of the work done is no different. Although a high-quality and reliable soldering iron, designed for professional use, will last a very long time and will not cause any difficulties in operation.