Automobiles, Cars
Injector cleaner Hi-Gear: reviews, instruction manual
In the process of intensive operation of the car, all elements of the fuel system are polluted by various sediments. It can be either solid or resinous products. Often, they accumulate because of the use of poor-quality fuel - in gasoline, which is offered at domestic refueling stations, there are organic compounds of benzenes, sulfur, olefin and many other substances. Especially strongly such deposits are susceptible injectors injector engines.
Sooner or later, each owner of the injection car will collide with clogged jets. You can solve this trouble in various ways. So, some wash the fuel system on a specialized stand.
Why clean?
The required amount of fuel is supplied to the injector by a command from the engine ECU, which is guided by the data obtained from the mass of the sensors and sensors. Even a small layer of carbon, the thickness of which is less than 5 microns, formed in the power system of the injector engine, can disrupt the entire operation of the fuel supply system.
When to process the injector?
There are several signs or symptoms on which it can be determined that it is necessary to rinse the nozzles urgently. So, with a clogged fuel metering system, there are problems when starting the engine. Fuel consumption is seriously increasing. The engine loses stability at idle. The output power decreases, the toxicity of exhaust gases increases, detonation appears.
Available ways to flush the injector
The simplest way to clean the injectors is to use different additives. The given production differs accessible cost. These tools can always be found on the market, and the cleaning process is performed completely independently. It is enough to pour the Hi-Gear fluid into the tank, then refuel the car and travel a little, giving the engine a high load. The liquid cleans all deposits and blockages in the entire fuel system.
Dry cleaning of injectors
If the fuel system of the injection car is clogged in moderation, then you can use the so-called chemical method. But for this operation, a special installation is necessary - it is connected to the fuel system. Then a liquid-purifier is poured into the injector. The composition in a few minutes will dissolve all the deposits that formed in the nozzles. After 20 minutes of operation of the power unit with this liquid inside, under pressure the fuel system will be cleaned. As for suitable means, experts recommend a cleaner injectors injector Hi-Gear. This is a unique technology, a powerful composition that can cope not only with medium, but also serious pollution.
Ultrasonic Cleaning
This procedure involves flushing the nozzles in a container into which a special suspension is filled. The latter is also ultrasonic. This method is used when it is necessary to cope with very serious pollution, which could not remove various chemical products. The advantage of this method can be called the ability to control the patency, airtightness and the shape of the spray nozzle. This is a very complex flushing. Therefore, its price is quite high - much higher than the cost of chemical. This cleaning method is chosen if the dirt is very strong, resulting from the engine running on low-octane or low-quality fuel. If the car has traveled more than 30,000 km after cleaning the injector, then it is best to handle the injectors in this way. Some people use the Hi-Gear injector cleaner. Reviews of liquids from this brand indicate the efficiency of cleaning the fuel system. Moreover, the price for a bottle can not be compared with washing with ultrasound.
Clean the injector yourself with products from Hi-Gear
We have identified several ways to handle the injector. All of them are effective in case of pollution of different intensity. But for these services have to pay expensive. In all these cases, additional equipment is required. How to flush the injector at home to those who almost just became a motorist? In fact, everything is very simple with auto chemistry from the American brand Hi-Gear.
Synthetic cleaner for injectors
This product is created on the basis of a new synthetic formula that provides this liquid with high purifying characteristics among other preparations from other manufacturers. It is enough to pour the product into the tank of the car once, so that the work of the power system is completely restored. This fluid is suitable not only for injection engines, but also for processing carburetors, intake valves, engine cylinders. Also a plus of the product is an acceptable price.
High-speed Hi-Gear washing
The manufacturer positions this product as a powerful tool for cleaning any contaminants. It is worth applying this liquid once and it will cope even with hopelessly clogged injectors and injectors, which can only help replace. In parallel with the washing, the product lubricates the needle valve, prevents sticking, eliminates detonation. Also extends the life of the fuel system.
Reviews
When car owners notice that their car works differently, stability is lost, fuel consumption is increased, engine power is reduced, then it becomes necessary to clean the fuel system, because the reason is in it. But the fact is that all the additives that are on the market today are nothing more than an illusion of purification. It can not be said that there is no result from these products, it is. Here at least take the cleaner injector Hi-Gear. Reviews of those who have already used the products are generally positive, but motorists advise each other to be more careful. All that the composition will clean, then again get into the fuel system and further clog it. Some of those who poured these additives, and did not notice any result. 10% of all those who used these fluids noticed a worsening of the situation. But how to flush the injector so that the car works like a new one? Experts recommend only cleaning on the stand. Additives can be used, but only as a preventive measure.
Similar articles
Trending Now