How to make a brass knuckle and is it worth it?

Kastet is a cold weapon, through which the attack is not fists, and the combat unit. The main types of brass knuckler are three: these are weapons equipped with separate holes for each finger individually; With a large notch under the entire palm; As well as a three-headed brass knuckles. Kastet with their own hands, made from improvised materials most often do "for themselves," this weapon serves as a continuation of the hand

In most cases, the question of how to make brass knuckles has a simple answer - to cast from lead. This method is the simplest, everyone knows that lead is a metal that is very easy to melt, while it has a significant mass with a small volume.

So, how to make a brass knuckle.

1. Form manufacturing. On the brick the form of the future knuckle is drawn. After that, having resorted to the help of sharp objects (it can be a screwdriver, chisel, etc.), the shape is carved into a brick. A drill with a medium-sized drill can greatly alleviate this task. The shape should be such that the holes for the fingers are convex on the brick. It is clear that the form should be the opposition of the real model. The result of making the mold should be a perfectly flat surface for pouring lead.
2. The second stage of the answer to the question of how to make a knuckle is the melting of lead. To do this, use any enamel or aluminum dishes and open fire. The time for which lead is melted is approximately 20 minutes, the melting point of this metal is 327 degrees.
3. The last action, helping to understand how to make a brass knuckle - is casting a mold with molten lead. Since the metal is in a molten state and is characterized by a high temperature, this process must be accompanied by special attention, caution and accuracy. The metal used to make brass knuckles is hardening, so you need to do everything right the first time, otherwise you'll have to start all over again. After the lead has completely solidified, it must be separated from the brick. Often, those parts of the stone that cover the holes under the fingers, get stuck in the finished product - in this case they need to be knocked out with a hammer.
4. The final stage of manufacturing is finishing the knuckle with a file, the surface must be brought to the ideal.

The above method of making a knuckle is very common, but not unique. The knuckle can be made not only from metal. The simplest weapons are made of wood. A board is used, 2-3 cm thick. A trapezium is cut from the board, in which an oval hole is made for the hand.

There is another way, which results in a more impressive weapon - three-headed brass knuckles. This weapon is in the form of the letter "T", each end of which ends with a point. To make it, it is necessary to drive three nails into a piece of wood 12-17 cm long and 3-3.5 cm in diameter, about 7 cm long, the ends of which are sharpened.

Having learned how to make a brass knuckle, do not immediately take up the making. Remember that although these weapons are easy to manufacture, knuckwheels are legally considered to be a cold weapon, for the storage of which, and even more so for the use, criminal liability is provided. In this case, since the brass knuckles are quite widespread, it will not be superfluous for everyone to know about them and be able to produce in the event of a threat to their own lives.

Nevertheless, remember that for self-defense the best will still be to use handy tools that are not prohibited by law. For example, an excellent alternative to brass knuckles are ring-shaped pieces of thick enough leather up to a width of 6 cm. They help protect the fists from damage.