The second stage of the process, how to make flooded floors with your own hands, is to fill the finish layer.

The emergence of new technologies in the field of construction and new building materials has made a solution to many of the problems associated with the repair and construction work, completely easy. Many experts argue that some of the work has become so simple that it can now be done by any man who owns the least building skills in the country. This was especially encouraging to those inhabitants who are limited in the funds allocated for construction and repair work.
Most recently, the so-called liquid or, as they are called, flooded floors appeared on the market. This is a completely new material that belongs to the category of flooring materials. At present, making self-leveling floors with their own hands is not difficult.

But first a little about the advantages of the floor. Since this type of floor is poured at a time, a completely monolithic coating without seams is obtained. This in turn provides full waterproofing of the floor. The surface of the filling floor is sufficiently smooth, so the absence of small cracks and pores is a guarantee of its hygiene. It is in the pores that mud forms.
The next indicator is the resistance of the floor to the effects of all kinds of acids and alkalis. In addition, this type of flooring copes with various loads, so it is increasingly used not only in housing construction, but also in warehouses, hangars and so on.
As mentioned above, it is not difficult to make self-leveling floors. The main thing in this matter is to strictly follow the instructions. The pouring floor can be laid on any surface, the most important is that this surface should be free of large flaws, which include grooves, cracks, hillocks and so on.
The base under the floor is leveled. If this concrete base, then it must necessarily be primed. The wooden base is first cleaned of paint, seal all the seams, then allow to dry.
Now to the question of how to prepare a solution. Mixture of the filler floor is not difficult to prepare. All instructions are on the package. Usually dilute the dry mixture with water and mix thoroughly with a construction mixer. The ready-to-use mixture is left for five minutes.

In any scenario, first the base layer is poured, which will become the basis of the entire floor. To do this, beacons are exposed using a laser level, the level line of which should be above the highest point of the floor at a distance of 6 millimeters. Beacons can serve as usual screws or screws, the step of their installation is equal to 30 centimeters. The base layer must be well aligned, for this purpose a special tool is used, which is called squeegee. When the base layer is poured, it is necessary to release air bubbles that are formed during the pouring process. For this, a spiked roller is used. Filling is done before the lighthouses.
Now it is necessary to wait a couple of days for the base layer to dry out. The second stage of the process, how to make flooded floors with your own hands, is to fill the finish layer. Everything is produced using the same technology. After the floor has dried, it is covered with polyurethane varnish. The standard consumption of one package of a dry mix is two square meters, although it all depends on the thickness of the jellied floor. As you can see, the process is fairly simple and does not require much experience. Filling the floors with their own hands is best done together. One prepares the mixture, the second pours. Continuity of the process is a very important component of the filling floor, which will affect its quality.
Today, having information on the construction of any type of floor, you can safely and without much effort to make any floor in the house with their own hands. And it does not matter which material is used, whether it be wood products, concrete, ceramic tiles and so on. At present, glass floors are very popular. Of course, this is a tribute to fashion. But even a glass floor with their own hands can be done without much difficulty. Although this type of floor is quite a complex construction and it is better to erect it to specialists who have extensive experience and high qualification.
The component of any repair and construction process is the exact conformity of the technology and the correct choice of the material that will correspond to the chosen technology.