How to fill a sewing machine, or Start learning how to sew

The inexperienced, just beginning seamstress should first become acquainted with the main important theoretical questions, after understanding how the line is formed, how to properly choose the needle-thread ratio and how to fill the sewing machine, you can avoid the simplest but common mistakes in working with sewing equipment . Practice, too, is certainly important, but the theory will immediately begin to work with the understanding that it will be possible to properly process fabric of different types and thickness without errors and tangled threads.

Before you fill the sewing machine, you need to properly install the needle. To never be confused, which side of the typewriter should be a needle, you need to understand the principle of creating a stitch on the sewing machine. Usually, in a lockstitch machine, the needle is installed with a long gutter on the left, and in instruments with a zigzag - in the front. As a rule, all problems in the work of seamstresses begin with the wrong position of the needle. It happens, of course, and so, that it is installed correctly, and the thread is inserted according to the instructions, and the machine then passes, then it only pierces the fabric, without catching the lower thread. And the thing is that the needle was incorrectly matched to the thickness of the thread. This problem often occurs due to a too thin needle, a thread that does not fit into the groove of the shuttle should not fit into its groove. Matching the needle and thread is one of the important points in the rules on how to fill a sewing machine.

Modern sewing machines, unlike the machines of the last century, have labels and tips for refilling the upper and lower threads on the body, and many are equipped with automatic dressing, which greatly facilitates the use.

Another important nuance in answering the question about how to fill a sewing machine is the tension of the thread. Proper thread tension will allow you to get a smooth and beautiful line. In the machine line is inadmissible, when the thread winds from the wrong side, in this case it is not tight. If, after all, the problem is in the lower tension, then it is adjusted with a screw on the bobbin case. The right tension is the interweaving of the upper and lower threads in the thickness of the tissue, therefore, regulating it, you need to achieve exactly this result.

It is worth noting that if you choose a sewing machine of a new sample, for example, computer or electronic, the thread tension adjustment problem will disappear, since it will be installed independently when selecting a specific program.

So, summing up, we can distinguish three basic requirements for the correct filling of the sewing machine:

• Correct installation of the needle;
• Alignment of the needle and thread;
• Adjusted thread tension.

If you follow these rules, the sewing process will not turn into a nervous twitch of the machine and fabric, but will allow you to sew and embody all the ideas into reality.

There are a lot of manufacturers in the sewing equipment market, many of them have been offering machines for quite some time, such as zinger machines, which have served humanity for more than one century and are constantly being improved. But if you follow the rules of use, then any, even very old or unpretentious, is able to serve and delight your mistress. After all, the machine needs careful and respectful attitude, in return for which it will show even lines without tangles and omissions.