Ceiling fixtures for stretch ceilings: LED lights as an optimal option

In the design of the upper part of the various rooms, ceiling lamps began to appear more and more often. For suspended ceilings, LED lights are the safest option, since they release a small amount of heat. Without these decor elements, modern interiors are hard to imagine. They are used in most cases.

Advantages of LED devices

In many dwellings, ceiling luminaires are installed for stretch ceilings. LED devices are the most preferred option, since they have an extensive list of advantages. The most important of them are given below:

• Low level of power consumption;
• Very long service life;
• No flicker effect during operation;
• The possibility of reliable operation under different temperature conditions;
• Radiation direction;
• Relatively simple installation;
• Work in networks with different voltages.

In the manufacture of the housing for such products, as a rule, strong plastic and aluminum are used, so that they are able to withstand sufficiently strong mechanical effects without destroying. Light strokes and vibrations are not terrible for them.

Ways of fastening elements

Before buying it is necessary to choose the right LED lights for the house. Ceiling fixtures can be fixed in different ways. More common lanterns built into the top structure. After installation, the visible part is in the same plane with the ceiling surface.

Less popular, but promising in terms of design solutions hanging products, suspended on the hook, which is fixed to the floors. Before pulling in the canvas, a special hole is made in this or that place. A suspension is pulled through it.

A simpler version is to install the LED bill light. In this case, the embedded base with electrical wiring is prepared in advance. Auxiliary rings are glued at the installation site, after which holes of certain dimensions are made.

Number of sources

Lighting devices can be point or cascade type. In the first case, only one source is involved, and in the second case several. The final choice depends on whether the backlight is local or general. However, in some situations there are exceptions.

Point devices have one light source, so their dimensions are very compact. They are mainly used in kitchens, bathrooms and hallways. For general lighting it is necessary to use several elements at once, placing them at a short distance.

Cascade analogs are entire structures, differing in form and efficiency. They contain several light sources, which allows you to create an atmosphere of elegance in the room. Very often, such platforms are located above the dining table.

Cost of products

Many people want to buy LED lights. Their price is low, so they are available to a wide range of consumers. However, the final cost of production depends on various factors. The manufacturer, design capabilities, materials and power used are taken into account.

Below is a table showing how much a particular type of product costs on average.

The cheapest are spot LED lights. Their price is low enough, but they are usually purchased in large quantities. To fully illuminate the room you need to install several elements.

LED lights "Armstrong"

For commercial premises more suitable devices in the form of panels. LEDs in this case are located on the body of products. Their number can vary depending on the manufacturer. The main advantage is the uniform distribution of light. However, much depends on the size of the panels.

Buying LED lamps "Armstrong", you should pay attention to a number of important factors. First of all, this concerns the case of the device, which performs the function of heat dissipation. If overheating does not occur during operation, the life of the product can be very long.

Some manufacturers of aluminum replaced with plastic, which led to a deterioration of the thermal tap. In this regard, many models begin to lose the light flux in a short time. They fail quickly enough.

Serving for a long time can only quality ceiling lights for stretch ceilings. LED panels of reliable manufacturers will not be expensive, but they will be operated several times longer than inexpensive analogues of unknown brands.

Individual manufacturers save even on the panel that performs the light-scattering function. They often make it from acrylic glass, which quickly becomes cloudy. Because of this, not only the aesthetic characteristics deteriorate, but also the technical indicators are significantly reduced.

Final part

The information provided should help if indoor use is made of ceiling lights for stretch ceilings. LED analogs will not only save on electricity, but also beautifully decorate the top of any room, regardless of its destination, especially since the product range is very diverse.