How to change the light bulb for the number illumination with your own hands

In every modern car there is a function of highlighting the room. This is necessary in order to read and easily distinguish your license plate in the dark. Usually the bulb of illumination of number is located in a plafond which is either integrated in a framework of a back number, or in выштамpках iron of a cover of a luggage carrier. On old cars, this element can be located in the overhead lampshade and to replace the lamp, the lampshade is unscrewed, and the lamp is replaced. To learn how to change the light bulb numbers on popular cars, read the article to the end.

Why change backlight lamps

This fault does not affect the operation of the car in any way, but we paid attention to it, because for such a trifle, according to the traffic rules, a fine is imposed. In order to avoid trouble, the driver must know how to change the light bulb of the number lighting with their own hands. Inspector, seeing that you have a defective highlighting of the number, will be only happy to report this. By the way, by replacing all the car's lights on the LED lights, you can save battery power and reduce the load on the mains power supply of the car.

"Lada Priora" - a people's car

"Priora" - a very popular and prestigious model of the domestic manufacturer "Lada". This car is very common, thanks to low cost and prices for auto parts. Any car owner should know how to change the backlight of the number on the "Prior". In the niche of the back room there are two lamps and you can replace the light bulb in them without removing the lamp. By the way, here it is established on a bulb of type W5W. To quickly and correctly replace a couple of actions. First, open the trunk, and secondly, carefully inspect the area where the license plate is located. After that we find the wires going to each of the fixtures.

Now we will turn the bulb counter-clockwise, remove the cartridge and insert it into the bulb. Reattach the cartridge, turning clockwise.

The second option of replacement is to pull the plafond outward towards yourself, using a flat screwdriver. Do this carefully - the plafond can be damaged.

How to change the backlight lighting bulb on this car, we figured out, and on the others?

"Hyundai Solaris" - learn Korean cars

This model of the Korean automaker is no less popular. This foreign car is profitable and prestigious, and also has a remarkable appearance. If you look at how to replace the lights of the number on the "Solaris", then at first glance it becomes clear that the backlight is implemented on two lamps. It is almost the same with the previous car.

More details on how to change the lights for the number on the "Solaris" are described below.

To access the wiring located on the trunk lid, you need to dismantle the lining in the right place, namely on the side where the license plate is located. In order to do this, you must use a wide screwdriver or metal ruler, inserting it into the seam between the iron and the skin, gently pulling the latch. Do it neatly, do not damage the latches, but if this happens, do not despair, they can easily be found on sale and replaced.

When we see wiring harnesses and cartridges, we can repeat the above described actions: turn the cartridge counterclockwise, replace the lamp, install the cartridge back and turn it clockwise.

We change the lamp on the "Toyota Corolla"

The next car in our review is "Toyota Corolla". How do I change the backlight of a room in a Japanese car?

As you can judge by the photo, there is nothing complicated. We remove the trim with neat movements. After taking out the faulty bulb, replace it with a new one, be careful that when dismantling the lamp it does not crack in your hands and you are not injured, and then collect everything in the reverse order.

Results

You learned how to change the light bulb numbers on popular cars. Be sure that on other models of cars nothing is difficult and everything is done in the image and likeness of our examples. By the way, eliminating such minor malfunctions by your own hands, you save money, because in car repair shops they take quite a lot of money for such procedures, for several hundred rubles, depending on the region. So why waste money for such trifles, if it is absolutely not difficult even for the most inexperienced driver?