Gates made of corrugated board with elements of forging: installation features, pros and cons

The gate can rightfully be called the visiting card of any house. Therefore, it is understandable the desire of each landlord to make the entrance to the courtyard as beautiful and durable as possible. Today, we will talk about which gate to choose.

Gates and fences made from corrugated board

An excellent option of the gate for the yard will be a gate made of corrugated board with elements of forging. This choice is especially good if the fence is also made using this material. It looks great combo fence, especially in the ensemble with forged elements present in the gate.

In today's construction market, corrugated board has long occupied a solid place and has gained many admirers. This material is widely used in such areas of construction as:

• Sheathing of buildings.
• Roofing.
• Finishing of ceilings.
• Construction of fences.
• Construction of prefabricated structures.

Such a variety of applications is due to good aesthetic qualities of the material, durability and ease of installation.

Given the high cost of other materials, the gates made of corrugated board with elements of forging allow you to save a decent amount of money, while not losing much in aesthetic qualities.

Profiled sheeting is wall and roofing. Usually it is indicated by abbreviations PS and PC, respectively. The roofing sheet is distinguished by a higher wave height, which is necessary to give the sheet more rigidity. When manufacturing gates and fences, a wall is usually used, and the wave height is taken no more than 20 mm. This indicator provides the necessary rigidity of the product.

In terms of coloring corrugated board is galvanized, painted on one side, and also painted on both sides in the same color. For gates and fences, it is best to use a painted sheet. In addition to better appearance, such sheets are more durable.

Also, when selecting materials, pay attention to the thickness of the sheet. Many manufacturers offer profnastil at a fairly low cost. However, the price is reduced by reducing the thickness of the sheet, and this, in turn, negatively affects the rigidity and durability.

What is the value of the forged gates?

So, like any product, the gate has components that affect their final cost. And rational selection of these components will help to get the optimal price-quality ratio.

What affects the cost of forged gates:

• Kind of forging: hot or cold.
• Saturation of the picture.
• Material for the manufacture of forging. The thicker the rod, the more expensive.
• Material for flap wings.
• The complexity of pre-color preparation.
• Materials for painting.
• Installation of the gate.

Choosing a picture for the gate

First of all, this, of course, is the complexity and richness of the picture of the gate. If the gate is enlightened - the filling should be sufficiently dense, otherwise the meaning of the gate as such will be lost. In the case of a blind gate, you can pick up A light pattern that will not heavily clutter the plane of the leaflets and at the same time serve as their decoration.

When choosing a picture for the gate it is worth determining - which forging will be used. There are two options:

• Cold forging.
• Hot forging.

Using the first allows you to save time and money, which will be needed to make the gate.

Differences of hot forging from cold

Although similar products are produced at the output, there are significant differences between cold and hot forging. Products from the cold are assembled on the principle of the designer. Assembly of such structures is carried out from ready-made decorative elements, which allows to reduce the cost of the final product in comparison with hot forging. When using the hot metal processing method - all elements are done manually.

A significant advantage of hot forging can be called the opportunity to get any shape and style, which opens up great opportunities in terms of design. In the cold, on the contrary, there is some limitation.

However, an extensive base of stamped, forged and cast elements, offered by manufacturers - allows you to get quite a variety of solutions.

Profiled sheeting with forging: the main advantages

Gates made of corrugated board, the price of which is relatively small, has many advantages.

• Durability. The service life of the corrugated board reaches 50 years, the more so this material is galvanized and painted in the factory, which greatly improves the performance characteristics.
• Low cost. If you compare the corrugated board with other possible options for gating the gate - this will be the most profitable.
• Good appearance.
• Light weight. In the blind wrought-iron gates, the use of a steel sheet for lining the doors significantly increases their weight. When using pronastila weight is not very large. This reduces the load on the gate pillars and reduces the likelihood of drawdowns. In addition, the installation of the gate will be easier and faster. Gates made of corrugated board with elements of forging combine well with different types of fences.

The gates of the corrugated board

Gates made of corrugated board with elements of forging have some drawbacks, albeit insubstantial. You can separately consider the disadvantages of forging and corrugated board.

Minuses of forging:

• The cost. Still, forged metal is quite expensive.
• Exposure to metal corrosion. The most important drawback of forging, especially exacerbated in cases of using a complex pattern, when there are many hard-to-reach places for painting.

Professionals:

• Limited color palette.
• The profiled man is afraid of scratches.
• Because the material is rather thin, mechanical damage can completely ruin the canvas.

However, these shortcomings are not very significant, especially against the background of the merits of such gates.

Thus, it can be concluded that the gates made of corrugated board with elements of forging will be a worthy and practical choice. Since, having a decent appearance, such gates offer excellent value for money.