Finishing frame house: interior decoration. Possible options, their pros and cons

If you have completed the construction of a frame house, you still have to think about its interior decoration. Only in this way you can achieve comfort and comfort in the premises.

Technology

Similar work is carried out in two stages, the first of which provides for rough manipulation, while the second one is finishing. Initially, it is necessary to prepare the surface of walls, ceiling and floor, under such measures is understood the removal of the old coating, as well as the preparation and leveling of surfaces. Finishing is the finishing stage when surfaces are exposed to wallpaper, installation of lining materials or painting.

Selection of material for roughing

It may take several months for the exterior finish of the frame house. Interior finishing is carried out in the same period. After visiting the building store, you can select the material that will correspond to the allocated budget and certain characteristics. For conducting roughing the most often used OSB or drywall. As an advantage in these cases, it is possible to hide the flaws of the walls with flat sheets. You can install such cloths on untreated or curved surfaces. With the help of GKL it is possible to form complex design compositions. In a short time you will be able to make the wall covering, preparing them for further work.

Minuses of using GCR and OSB for carrying out rough work

If you have purchased a newly built frame house, you can make the internal plasterboard interior by yourself. However, this material has some drawbacks, which will be expressed in reducing the area of the room when installing sheets on uneven walls. If there are any, then first you need to mount a wireframe system that will be somewhat removed from the base. This applies to the OSB, which has a more impressive thickness. If you use this material to level the ceiling, then without additional devices for lifting the canvas will be very difficult.

However, sometimes the solutions described are the only true ones.

Pros and cons of using wallpaper

Considering the options for interior decoration of the frame house, you can pay attention to the traditional wallpaper, which are presented in the modern market in a wide variety, they can be paper, acrylic, vinyl, fiberglass and non-woven. Each of these types of finishes has its own positive and negative features. For example, paper wallpapers, although they have low cost, but are extremely unstable to low temperatures and moisture, and without that they are very short-lived. You can use them as a temporary solution.

The interior decoration of the frame house, the photo of which is presented in the article, can be realized with the help of vinyl or acrylic wallpaper, which are resistant to mechanical damage and are strong. The latter are characterized by durability and moisture resistance. Owners of private homes that want to diversify the interior, choose a non-woven version of the coating, which is made of foamed vinyl, it can be used as a basis for further decorative painting.

The worst enemy of frame wooden houses is fire. If you want to make housing more fire-safe, it is worth buying glass-fiber wallpaper, which, along with mechanical strength, is resistant to the effects of flame. In doing so, they can be successfully used for staining.

Positive and negative features of the lining

Quite often in recent years, the interior decoration of the frame house is made by the lining. This is not accidental, since this material is able to bring home cosiness and natural appearance. Wood will allow to give the walls a higher sound and heat insulation. Depending on the available funds allocated for repair, you can choose a lining that will belong to a particular grade.

On the surface of the elements there will be no defects, if you prefer extra-class battens. Consumers who do not fear the presence of chips and spots, choose the finish of grade A. The material is denoted by grade B if there are several cracks and knots on one of the slats.

Considering the materials of the interior decoration of the frame house, you can choose a plastic lining, which you can install yourself, as it is quite easy to install. This finish is low in cost and not exposed to harmful bacteria. With the help of plastic slats it is unlikely to achieve coziness in the room, and the artificiality of the material will be immediately visible. According to the sound and heat insulation characteristics of PVC inferior models of natural wood, but it can be installed in rooms with a high level of humidity.

Carrying out of walls with plasterboard

Technology must be observed when the frame house is finished. Interior decoration, as already mentioned above, can include the use of drywall. With its help, you can hide any unevenness, which eliminates the time-consuming alignment of the base. Fixing the canvases is made on a metal frame, which speeds up manipulation. The resulting free space between the main wall and the sheet can be filled with insulation material, as well as laying electric wiring and other communications.

The low weight of drywall will not create an additional load on the overlap, so you can build arbitrarily complex geometric designs, which sometimes represent multi - level ceilings.

Initially, the master will perform the marking, reinforcing the starting UD profiles with self-tapping screws, then the wiring is placed in special plastic boxes or corrugated PVC pipes. Plasterboard sheets must be laid on the profile and fixed with screws for metal. The cap of the fastener should be recessed by 1 millimeter. Even an inexperienced craftsman can finish the frame house. Interior decoration with gypsum cardboard will be completed in a matter of days. Carrying out these manipulations does not imply that the master has special skills.

The seams formed between the sheets must be filled with putty, the tool will need to get rid of the surplus material, effecting the alignment of the seams. After that, a fine-grained abrasive sandpaper comes in, which will allow the joints to align to prepare the sheets for finishing.

Use of OSB plates

The technology of mounting such canvases is almost the same as that used for plasterboard walls. The only difference is the impressive weight of the OSB. For this reason, you will need to use a more reliable and durable hardware. To fix the canvas to the wooden frame, use spiral 50 mm nails. At the junction points the fastener is installed in steps of 15 centimeters. At the edges of the edges of the walls should leave a centimeter gap, but the distance between the plates that do not have a connection, should be two millimeters. If you plan to use the OSB to form a floor covering, then you need to lay the sheets, placing them perpendicular to the lags.

The assembly of the sheets does not include the entire finish of the frame house. Interior finish provides surface treatment with sandpaper. After this, the plates are varnished in 3 layers, each of which must be dried well. Such a coating acts as a protection of the structure of the material from the penetration of moisture. If you decide to cover the surface of such a rough base with plaster or paint, then first it is necessary to apply a primer.

Benefits of using in the interior trim of the beam

Over time, the imitation of the beams is becoming more popular, especially when compared with the lining. The premises after the finishing works are obtained are warm and aesthetically attractive. All the advantages of this material are related to the qualitative characteristics, which are expressed in the absence of shrinkage. Over time, lamellas do not crack, since they are provided with grooves to relieve stress within the articles. During installation, time and labor costs will be minimal. The pluses include that such a finish is not afraid of the effects of ultraviolet rays.

If you choose certain types of wood, they will not be adversely affected by moisture. The cost of such a material is significantly lower compared with a full profiled or glued beam. And if you carry out a quality installation, then the appearance of such walls will almost not differ from the natural log. The internal finishing of the frame house by imitation of a bar is not afraid of influence of high and low temperatures.

The main disadvantages of imitation timber

Despite the fact that the products in the manufacturing process are treated with various antifouling compounds and antiseptics, they do not cease to be fireproof. In the process of exploitation you will have to process the wood once a year, otherwise it will be covered with cracks, change its color, and when exposed to fire it will light up. If the interior decoration of the frame house is made by hand with the imitation of a bar, then the wood will have to be maintained for the whole life, covering the surface of the walls with protective means and paintwork materials.

One can not fail to note one more minus, which is expressed in expensive components by the type of internal corners, decorated elements and external consumables. If you do not want the walls to resemble a lining, then you need to use panels whose width starts from 90 millimeters.

Minuses of imitation timber from pine

If the interior walls of the frame house are to be imitated, it is important to choose the right kind of wood. For example, pine has some drawbacks, among them is gumminess, which indicates an increased fire hazard. Before the installation works, despite the fact that the material was treated with flame retardants at the factory, it is necessary to apply a fire-fighting composition. It is worth remembering that the scent of pine is kept very long, after a certain time it can start to irritate. That is why this feature should be taken into account when decorating living rooms.

Conclusion

Interior decoration of the frame house OSB slabs is most often in the case when there is no deficit in the free space. Otherwise, it is best to choose sheets of drywall.