Excavator Hyundai: specifications, photos

It's no secret that the excavators are incredibly useful and multifunctional special equipment that is used everywhere. It can be used for construction, for the development of mineral deposits, on construction sites and so on. The most important thing is that your excavators should be of high quality and function at the highest level. Therefore, you need to pay attention to those models that have already managed to recommend themselves ubiquitously. As for the manufacturers themselves, it is recommended to start the market research with Hyundai. It is one of the leaders in the production of both this type of special equipment and other options. What kind of excavator should I choose Hyundai? After all, if you look at the model range, you can find a few dozen titles. Which of them is better?

Hyundai R 180NLC-7

The first excavator Hyundai, to which you should pay attention is R 180NLC-7. This model has been on the market for a long time, it is one of the very first ones that were produced by this manufacturer. The first thing to look at is the total mass of this model, which is a little over 18 tons, which is quite a lot - but at the same time gives an excellent support for working ladles. If to speak about them, it is worth noting that the bucket capacity installed on this excavator can be from 0.4 to 1.1 cubic meters - a pretty decent range, which opens up for you great opportunities. Also you need to pay attention to the engine power, which is as much as 124 horsepower, which is a pretty impressive indicator. Also estimate the depth of digging and the height of the unloading - they are as much as six meters with a small one, and in the first case the figure is even closer to seven meters. And this despite the fact that the digging radius is almost ten meters. As you can see, even that Hyundai excavator, which was one of the first on the market, can surprise you with its characteristics.

Hyundai R 210LC-3

Another model that will make you wonder - this is an excavator "Hyundai R 210LC-3", you can even hit its size. After all, its mass is 21 tons, which is three tons more than the previous version. But at this size engine power, unfortunately, increased by only two horsepower and amounted, respectively, 126 horsepower. But the size of the bucket increased quite noticeably - to a maximum volume of almost 1.4 cubic meters. With a depth of digging a little over six meters, the flight compared to the ground level is more than nine meters, which also can not fail to impress. And, of course, in this model it is also worth noting the fact that it has a fairly good speed of movement - about 5 kilometers per hour, which is quite enough for the construction site or any other work to quickly cope with the tasks. If you want to take a look at this Hyundai excavator, the photo may surprise you, since this model is really huge in its dimensions.

Hyundai R 300LC-9S

It was already said that the previous model of the excavator is large in size, but you should definitely take a look at the R 300LC-9S, as this option is much ahead of the previous one in size. Generally, the Hyundai crawler excavators are characterized by their large overall dimensions and corresponding power. To begin with, at least, that this model weighs almost thirty tons. But the volume of the bucket did not increase in comparison with the previous model, and even decreased to 1.27 cubic meters. But in fact, the revolutionary change occurred with the engine, whose power jumped to unprecedented heights, amounting to 263 horsepower. Strictly speaking, eight meters of depth of digging and more than ten meters of height for the ejection of the earth once again prove that this model deserves attention. It is also not inferior in speed to the previous one, but at the same time it is also distinguished by an incredible effort of digging, which amounts to 17,200 kilograms of power. Finally, it is worth noting the dimensions of this model - in length it is ten meters, and in width and height - three meters. Of course, if you need a Hyundai wheeled excavator, then this model will not work for you, because it is completely executed on a crawler base, which, in turn, is rather an advantage.

Hyundai R 500LC-7

If you are interested in the largest available excavator of this company, then you need to look at the model R 500LC-7 - it seriously exceeds other Hyundai excavators. The technical characteristics of this model of special equipment will surprise you - to start with at least its mass. Compared to previous models, this seems like a real monster, since revenge is almost as much as fifty tons. Naturally, he also has other characteristics - for example, the bucket capacity has increased to almost three cubic meters. What can we say about the engine, the power of which already amounted to 353 horsepower. At the same time, the digging radius has now increased to 12 meters, as well as the height of the earth's ejection, but the depth has remained at about seven and a half or eight meters. The excavator itself has grown two meters longer - now it is 13 meters long, three meters wide and almost four high. Here such you can see the characteristics of the excavator Hyundai. However, you can safely say that such a monster is clearly not for all works, so you need to choose carefully.

«Hyundai ROBEX 180LC-3»

Separately it is worth mentioning the Robex line, which is also produced on a caterpillar basis, but has some excellent characteristics from the R-series. This model is one of the most famous - it is compact, but very effective. Weighs 18 tons, digs and unloads for six meters with a small one, has a power of 126 horsepower and a bucket with a volume slightly more than one cubic meter.

«Hendai ROBEX 210-3»

Also worth noting this model, because it is very similar to the previous one - it actually represents its follower. However, there are several important differences. For example, both the unloading height and digging depth increased by about one meter, the power increased to 142 horsepower, and the bucket volume to 1.34 cubic meters.

«Hyundai ROBEX 290-3»

Separately it is necessary to talk about this model, which is not particularly distinguished against the others by its size and weight. It takes something else - namely, the depth of digging. Among all the excavators and it - the largest in this regard, the jigger, which is ten meters. At the same time, it has a good horsepower of 182 horsepower, and an impressive bucket of almost two cubic meters. And all this with a total mass of twenty-seven tons, which is not so much - compared, for example, with a fifty-ton excavator.