Epoxy self-leveling floor

The floor (epoxy) is considered one of the most optimal coatings. The material can be used both in residential and industrial premises. Filling polymer epoxy floors have a beautiful appearance that persists for a sufficiently long period. The coating service life is not less than 10 years. In addition, the two-component epoxy filler floor has excellent performance. Thanks to them, this coating is in no way inferior to other materials. Next, we'll figure out how to make epoxy self-leveling floors with your own hands.

Main properties of the coating

What are they? The epoxy flooring is often called "liquid linoleum". This is due to its appearance and application technology. Previously, such coverage was used exclusively in industrial buildings. But over time, the bulk of the floor (epoxy) began to be laid in the apartments. One of the main features of the coating is that after its application an ideally flat base is formed. Other advantages that the floor (epoxy) possesses include resistance to moisture, abrasion and fire, strength and hygiene. The undoubted advantage of the coating is its ease of installation. Filling does not require any special equipment or tools. You can apply epoxy self-leveling floors with your own hands , even without special production skills. The whole process does not require much time or effort. There is no need to spend large sums of money to purchase material. Today, the bulk floor (epoxy) is a coating that combines high quality and affordable cost. That is why it is so common.

Technology features

The floor (epoxy) is applied in several stages. Each stage has its own characteristics. The main task is the consistent execution of all actions. This will largely depend on the final result of the work. In this regard, even before the start of pouring, you should familiarize yourself with the basic recommendations for laying the coating.

Working with the base

Surface preparation is an indispensable stage of almost any decoration. Working with the base involves cleaning it from various contaminants, including dust, oil, debris, other industrial and household substances. To do this, you can use a powerful vacuum cleaner and various cleaning means - solvents of fats and oils and other compounds. If there are various defects on the surface, they must be eliminated. In particular, this applies to various cracks and chips. They must necessarily be puttied. In this case, the coating will not only lie properly, but will also last for many years. When overshoots are too large, it is recommended to align the base first. For this, a leveling mixture is used.

Primer

During the installation it is necessary to ensure maximum adhesion of the coating to the surface. For this, before making the filling floor (epoxy), the substrate should be primed. Apply the mixture in several layers - their number will depend on the porosity of the surface. Primer spray evenly over the surface. It must be ensured that there are no puddles on the ground. For spraying, a spray gun is used. With this tool, the primer is applied in thin layers and quickly.

Base layer

Before pouring it is necessary to determine the degree of deviation of the base from the horizon. To do this, use a straight rake or level. In accordance with the obtained data, the thickness of the coating layer is determined. It is within 2-10 mm. The first layer is poured onto the prepared substrate. Between the connections of different portions of the material must pass at least ten minutes. During this period, the mixture will dry a little, and the joints will be suitable for processing and leveling. The complete drying of the first layer occurs within five to seven hours. Accelerate the process can create an optimal temperature regime in the room (12-25 degrees). Strength and beauty of the floor will increase if you create a second layer.

Decorative coating

After five to seven days after the second layer dries, a special material is applied to the surface. Usually, epoxy paint is used as a decorative coating . It not only is a decoration of the surface, but also provides protection from mechanical and other aggressive influences. If necessary, after a certain time, you can update the decorative coating, thus preserving its appearance.

additional information

It should be noted that the process of pouring the polymer floor does not require stopping other finishing or construction work in adjacent rooms. The components that are present in the material are completely harmless to humans and animals. The coating has no unpleasant odor either during application, or during operation. Care of the coating is also quite simple. It should be cleaned regularly with a damp cloth with a soapy or gel solution. No need to use abrasive compounds. Dirt from the surface is removed quite simply. Polymer floor can be poured into any room of the apartment: in the bathroom, in the kitchen or in the hallway.

Finally

The article gives a brief guide to creating a polymer floor covering . Apparently, the work does not require special knowledge or skills, complex equipment or a large number of tools. The process is not complicated. However, for high-quality work performance, you must follow the recommendations. In particular, this applies to the preparation of the base. From the thoroughness of this work will depend on the strength and durability of the coating. In addition, it is important to take care of quality polymer material for pouring. Today, a fairly wide range of these products is on the market, so there should not be any difficulties with the choice. When preparing the solution, follow the manufacturer's instructions. As a rule, all recommendations are indicated on the packaging.