Cleaning sewer pipes: several ways to get rid of clogging

Cleaning the sewer pipes is an obligatory procedure if you notice that the water began to leave very slowly or even stopped flowing. The reason for this can be a fat coating, a garbage or some object, such as a rag, that has got into the system. Also, the problem may be the poor quality of water (if it is too stiff). It is necessary to clean it regularly, so that the system will work for a long time and properly. There are several effective ways: mechanical and chemical.

So, if you have found a blockage, then the first means of dealing with it is the plunger. In order to use it, you need to collect water in the sink or the bathroom (based on which drain is clogged), and the remaining drain holes are well closed. Now try to work vigorously with a plunger and sharply tear it off. This procedure should be carried out several times. As a result, you will be able to eliminate a not very complicated blockage without using additional funds.

Cleaning sewer pipes in a complicated case involves the use of a special cable, which at the end can be equipped with small blades. The product must be stiff enough not to bend, stumbling upon the blockage, but it should easily overcome all the bends of the system. Pulling the cable into the sewer, you should simultaneously scroll it in one direction. Having stumbled upon a blockage, try to slowly and accurately rotate the product until it breaks the stopper.

The sewage pipes can also be cleaned with a pressure of water under strong pressure. In this case, all the holes, except for the clogged, must be tightly clogged. If fat has been deposited in the pipes, hot water (boiling water) can be used to remove it. It must also be submitted under pressure. Sometimes, various additional substances are added to the liquid, which split the fat.

There is also a chemical cleaning of sewer pipes, which involves the use of specific agents that can dissolve the blockage. These substances can soften the organic plugs and remove them from the system. In addition, in this way you can conduct additional disinfection of pipes. It should be noted that such elimination of blockages is not suitable for very complicated cases. It is better to use chemistry to prevent the appearance of deposits.

Cleaning of sewer pipes can also be carried out by safe national means. For example, pour a few large spoons of soda (with a slide) into the sink, and then pour the same amount of vinegar and close the cork. Leave for several hours, and then rinse the pipes with hot water. The only drawback of this method is that after it there is not a very pleasant smell. However, it quickly vanishes, and your system is further disinfected.

To date, you can count a lot of organizations that provide such services as cleaning sewer pipes. The price depends on the complexity of the work, tools and tools used.