Homeliness, Repairs
Rubber roll coating: application, installation, advantages and disadvantages
Rubber roll coating acts as a universal material. Thanks to a wide list of unique qualities, such foundations are a good solution for the arrangement of premises for various purposes.
Applications
Features of stacking of roll rubber coatings
The installation of rubber linoleum is carried out in several stages:
- To begin with, a foundation is prepared. The floor covering is cleaned of dirt and dust. The surfaces are carefully cleaned, then treated with a primer in the form of polyurethane glue and turpentine. These components are mixed in equal parts.
- After the primer has dried, the rubber roll coating is rolled over the surfaces. In this case, there should be no unevenness, bumps or bulges. After spreading the coating, the latter is left alone for several days.
- At the end, the joints are fixed with the same polyurethane adhesive.
Characteristics
The main consumer characteristic of the material is its increased elasticity. Coating rubber roll is difficult to break, damage as a result of shocks.
Benefits
Rubber coatings, roller paths are distinguished by the following advantages:
- Increased level of strength, resistance to significant mechanical stresses;
- Long service life in the most difficult conditions;
- Simplicity of laying;
- Affordable cost;
- The presence of an elastic, non-slip surface;
- Excellent noise insulation;
- Resistance to the effects of chemicals: engine oils, gasoline, household cleaners, alkalis and acids;
- Attractive appearance;
- Ecological safety, absence of harm to human health;
- Ease of care, cleaning from dirt and ice.
The only drawback of the floor rubber coating is the need to replace the entire strip in the event of critical damage to the surface. To avoid such troubles, when choosing a material, you should pay attention to the operating conditions, if necessary, giving preference to products of increased thickness.
Finally
Some types of material are produced on a self-adhesive basis. Therefore, their installation does not cause any difficulties even for unprepared users. Production of this plan is produced in the form of rolls and plates. Due to the high elasticity, these products can be laid on almost any surface.
Similar articles
Trending Now