Electric ignition on the gas stove does not work: possible causes and solutions

The use of portable lighters or matches for ignition of gas stoves has long been a thing of the past. Modern models provide for the automatic activation of the burner. It is enough to hold the button for a few seconds or to turn the lever in the direction indicated in the figure, as soon as the flame appears.

Such a system is easy to use, so it will not cause any difficulty in operation. But, like any technical device, and this at any time can fail. The operation of the electric ignition may be violated for several reasons. In this case, many simply stop using this function and use conventional matches to ignite the burner. If the gas stove is broken - the electric ignition does not work, what should I do in this case? To understand this issue, first of all it is necessary to understand how it functions.

How does the electric ignition happen?

The electric ignition system is very simple. When a person presses a button or turns the lever to start cooking, the signal in the form of voltage goes to a special condenser. As soon as the maximum voltage appears on it, it starts to discharge slowly. At this point, a spark begins to flow between the discharge unit and the burners. In turn, the gas is already supplied to the burner. In the process of reacting gas and a spark, a flame appears, which is then used for cooking or other things.

Modern models of electric ignition start to work only when the cable is plugged into the power outlet, since the power is supplied by charging with a voltage of 220 W. It is not recommended to use less voltage, otherwise the plate will start to emit a snap sound and may later fail. Therefore, when purchasing a gas cooker with an automatic electric ignition, it is necessary to think over the installation site. After all, to use all the functionality of the device, in addition to connecting to the central gas pipeline, it will also be necessary to connect it to the power grid.

How to understand that the electric ignition has broken down?

The main signs of failure:

1. With the usual holding the button or turning the knob in the right direction, the electric ignition stops.
2. When using the cooker for the purpose, the electric ignition produces a sound that looks like a click.
3. After turning off in the usual way, the electric ignition continues to work for some time.
4. Electro-ignition sparks, even if the cooker is in a non-working condition.
5. A burner can not be set on fire from the first time, it is always necessary to exert maximum effort.
6. In the scutellum, the machine is constantly knocked out.

Why does the electric stove not work on the gas stove?

Despite the fact that the absence of this function is not a critical aspect, many consumers will still immediately try to find the cause of the malfunction in order to maximize all the possibilities of the device. If the spark does not appear when using the button or turning the lever, this means that there are obvious problems. As practice shows, the most often does not work the electric ignition on the gas stove for three reasons.

The charger went out of order

Most often, the electric ignition on the gas stove does not work due to the ingress of fat or food on it. In some cases, the reason may be a detergent that gets on the device while cleaning the surface of the gas stove. You can solve the problem yourself. To do this, take a small sandpaper, clean the part and leave to dry.

The problem with a device powered by high-voltage charging

When the problem arises "inside" (transformer winding, exfoliated parts), then there is no sense in repair. Therefore, the most optimal option will be the acquisition of a new unit. There are blocks that are designed specifically for a specific manufacturer, or universal. The latter option, as a rule, will be cheaper, but not for all gas stoves.

Damaged arrester

In this case, the spark begins to appear not only inside the structure, but also exits to the burners themselves. In this case, it is not recommended to do repairs on your own, since to solve the problem the specialist should familiarize himself with all the nuances and, based on this, carry out the necessary work.

Why is there a spark and the electric ignition does not work?

Perhaps this is a separate case, which requires detailed consideration. After all, there are a lot of reasons that can lead to a malfunction of the electric ignition system. The first and most common cause is mechanical damage to the case. If a crack appears on it, then, most likely, the spark hits in a chaotic direction, but does not fall into the area of the electric ignition. It is worth noting that the charger can not be repaired, so in detecting a similar problem you will have to purchase a completely new part. According to experts, for this reason, the electric ignition on the gas cooker Gorenye often does not work.

Stabilization of the working process can also be disturbed due to the too high pressure by which gas is supplied. If the gas stove is "Hansa", the electric ignition on it is not often for this reason. To eliminate the malfunction, you only need to find the optimal parameters and bring out the "golden mean". And, finally, it is recommended to check the condition of the nozzle. The fact is that often due to a malfunction of some constituent elements of the burner, the electric ignition on the gas stove does not work. Most likely, dirty is dirt or accumulated fat. You can take a regular wire and clean the burner. Of course, to conduct such events it is best to contact the service center.

Is it possible to fix the electric ignition independently?

With a number of some troubles, the user can cope on his own. However, it is worthwhile to understand that all works must be performed in accordance with the manufacturer's recommendations. If the product is still under warranty, then doing it in principle is worthless, since the employees of the service company are obliged to remove all the malfunctions in accordance with the obligations. If any internal elements do not work, then you should contact professionals who can tell if you need to buy new parts, or you can repair your home components and return the electric life to life.

To diagnose malfunctions, it is necessary to set the burner on fire and observe how evenly the flame will burn, whether the fire spreads all over its surface. Normally, the fire should turn purple, depending on the intensity of the burning. However, if the flame turns orange or yellow, you can immediately say that this phenomenon deviates from the norm, and the operation of the device is broken. In the event that the flame appeared only on one side, this may indicate that the dissector is not working properly or the plate is on an uneven surface, which leads to a problem in operation. As a rule, in such a position, the electric ignition on the gas stove does not work. You can either clean the nozzle, or install a new model of the divider. When the combustible mixture is distributed unevenly, the electric ignition will not work. This is the very system of the device.

All elements have a parallel connection. Power is provided by the unit responsible for the ignition. However, the inclusion is due to the use of different buttons or levers. In the event that a spark does not appear and the gas is open, it is worth trying to use the second button, not releasing the first one. If nothing happens, then the breakdown is 100%, and it is better to contact a specialist to eliminate such problems.

If for a long time the technician is squeaking or cracking, then the problem is the contact closure. Similar sounds can be observed when the electric ignition on the gas stove "Hephaestus" does not work. Typically, this is due to the ingress of fat, products that promote the oxidation of elements. In order not to bring to a similar situation, it is necessary to periodically clean the plate and allow parts to dry thoroughly. In this way, you can take care of extending the life of the device or fix the problem. Do not forget about your own safety. Since the cooker operates at 220 V, it is first necessary to disconnect it from the mains and to cut off the gas supply.

What malfunctions can still occur?

A rather common problem is the shutdown of the gas burner during operation. In this case, first you should observe how good the combustion of fuel is. You can either clean the nozzle or adjust the gas supply. If such actions were useless, then it is recommended to contact the technician for an explanation of the cause. Most likely, you will have to buy a new thermocouple, which you can not replace yourself without having certain knowledge.

Often the burner has a smaller flame. If, until now, no adjustment has been made, the problem is most probably the jet that must distribute the gas and feed it for combustion. Most often, it is clogged with oil or fat, so all that is needed is simply to clean the part. If the gas stove - "Ariston" does not work, the electric ignition on the models of this brand is often for this reason.

Why it is necessary to address to the master?

Above all universal problems were described, which even an inexperienced person can deal with on his own in cases when the electric burner stopped working on a gas stove. However, it is worthwhile to understand that this is a complex device, which sometimes requires thorough testing. With a conventional screwdriver and a flashlight it is impossible to hold it. Of course, the services of the master will be somewhat more expensive than self-repair, but in this case you can provide security for your family and prolong the life of the device. After all, if there is an incorrect cleaning or replacement of parts, there is always a risk of spoilage. And the new plate will cost much more than the service of the master.