Arbor with his own hands made of wood as an indispensable attribute of the garden

The arbor with its own hands made of wood is capable of giving the garden plot a finished view and will allow you to enjoy nature far away from the bustling city bustle. Here it is perfectly possible to spend summer days and evenings. And also rest in the fall, hiding in the arbor from the rain. It can be of different shapes and forms, but the most popular is the wooden one.

Some features when installing a gazebo

One of the features of the installation of the arbor - the correct selection of the place. Its ideal location is the neighborhood with a large tree. In this case, the day in the arbor is not so hot. Being in the shade, it will be even more pleasant to rest in it. It is also necessary to take into account how windy and rainy it can be on the site. If you want to protect yourself from the weather, then it is better to make a solid wall in the gazebo from the blown side or glaze it all.

Start of work - laying the foundation

When you decide on the place where you will install the gazebo with your own hands from the tree, you can proceed to its installation. First remove the top soil about 15 cm. Then pour this pad with sand and make a marking for the foundation. It may not be necessary, if the design is open and easy. It is enough to make a columnar foundation here, which is not difficult at all. To do this, load the pillars to a certain depth. This will make the summer house more stable. Such pillars can be stones, bricks, wood and other materials. Then they should put a layer of roofing material to improve the waterproofing.

We make the floor and the frame of the arbor

Arbor with his own hands made of wood should be equipped with a strong floor, so for its foundation should use a wooden beam. It must be laid on foundation pillars. Well fixing the beams, you can go to the frame. As the main material, it is better to use a 10x10 cm beam. First of all, the main vertical bars are put. At their ends need to cut the cuts. The upper part must be prepared for fastening the roof rafters.

Making a roof for a gazebo

First you need to make a foundation for the roof. This is done on the ground. The boards of the beam are fastened in the middle. On their edges it is necessary to make small cuts. With their help, you can install the base of the roof on vertical posts. From the timber you need to collect the roof itself. Attach it gently to the bottom. From inside, trim the lining, and outside it is covered with slate, tile or any other material for your taste. Garden arbors made of wood by their own hands can be made by another method, but this one is the simplest.

Handrail and floor gazebo

The arbor with its own hands made of wood can be equipped with beautiful handrails. In addition, they will give the framework additional rigidity. A board can be used for rails. It also suitable for laying the floor. It can be left as it is, but it can be covered with linoleum. If the gazebo turned out to be elevated above the ground, then take a few steps. Set here still a bench and table with your own hands made of wood, and then it will be a great place to collect the whole family for a tea party.