A snowmobile from a motoblock with your own hands. How to make a homemade snowmobile from a motoblock?

Motoblock is a professional tool that is used in agricultural work. With the use of such equipment, you can make a lot, this applies to the snowmobile, the main thing at the same time - to show accuracy and observe the technology of work. A snowmobile from a motoblock with your own hands can be done if you prepare some materials and tools, the list of which will be presented below.

Such equipment can be used in winter as a transport vehicle, when it becomes necessary to go for firewood or to hunt. The snowmobile has excellent cross-country ability and maneuverability, which acts as its main features. A snowmobile from a motor-block can be executed by oneself, while the process of alteration will not be too easy, but it is still possible to carry out these works. You can choose one of the existing ways of doing this work, some of them are quite simple, while others are more complicated.

Preparatory work

To carry out the work you will need to stock up with a pipe bender. Not always such a tool is in the home master's arsenal, which is why it can be rented. A snowmobile from a motor block can not be manufactured without the use of a welding machine, which is why before starting work it is necessary to evaluate objectively your abilities. The motoblock will act as the basic element of the construction, the manual control tool will be perfect for this.

Do not look for equipment of a modern type, you will need to prepare something that belongs to the middle class. For the manufacture of a snowmobile, caterpillars will be needed, which will act as a conveyor belt equipped with snow traps. Caterpillars can be easily executed independently, while you can be guided by your own imagination. A snowmobile from a motoblock with its own hands can be made without caterpillars, then it is necessary to prepare the wheels.

Features of the snowmobile

It is necessary to carry out the work according to a certain technology, which involves several stages. Initially, a sketch must be prepared, which will allow the assembly to be done correctly. Well, if you can make a layout. It is important to correctly determine the design features of the equipment, which will depend on the tasks of the snowmobile. The model can be made from cardboard, it is preferable to perform it in full size.

Features of the frame

Before you make a snowmobile from a motoblock, you need to think about what elements of the construction can be purchased, and which ones should be made independently. At the next stage of the work can be done to implement the frame. For this, as a rule, pipes are used, it is preferable to use frame elements, which were borrowed from a motorcycle. This is due to the fact that these components of the means of transportation are most reliable when compared with pipes that are intended for laying a water pipe.

Making a snowmobile from a motoblock with your own hands, the photo of which is presented in the article, you will use a pipe bender, which will allow you to form the elements of the desired shape. Their attachment should be made using spot welding. Now it is necessary to weld the joints in such a way that a continuous seam is obtained.

In advance to the frame, you need to strengthen the bracket to use the welding machine, which you need to install the motor, seat, and other parts. Before you make a snowmobile from a motoblock, you need to prepare seats, which can serve as an ordinary old armchair. From the old bicycle you need to borrow a rudder, which is also useful when carrying out work.

Ultimately, you should get an excellent motorized vehicle, which can fit one or two passengers. In addition, the structure will be able to carry a cargo of low mass.

Recommendations for using a snowmobile

After the homemade snowmobile from the motor block is completed, you can start using it. However, it must be remembered that it is necessary to observe safety precautions, this will allow to exclude injuries. Thus, it is impossible to cross the frozen reservoirs with this vehicle.

Alternative manufacture of a snowmobile

A homemade snowmobile from a motor block can also be manufactured using a slightly different technology, while using a motor borrowed from the mentioned equipment. Before assembling it is preferable to prepare the Neva motorbike, which has a Japanese motor. In the vast majority of cases, the equipment has a four-stroke petrol single cylinder engine, which has air cooling. However, two-stroke motors can also be used, since they have a negligible mass. If you make a vehicle with such a motor, then you get a design that can be easily repaired and can be started manually.

Snowmobile Features

A snowmobile from a motoblock will be able to accelerate to 70 kilometers per hour. However, in this case, the assembly should be done professionally. This will result in a snowmobile, which will be able to overcome snow congestion. On such an aggregate it will be possible to plow the land, go to the forest, hunt or fishing, and just skate. Fuel will be consumed in a small amount, so it will take approximately 2 liters per hour.

Recommendations of a specialist

Snowmobile from motoblock is preferable to carry out according to the scheme, which assumes the presence of two skis (they will be located in front), as well as one caterpillar - from the rear. This design has a higher stability.

Another option for making a snowmobile

First, you need to take the main components of the future design. Next, the motor is mounted on the caterpillar motor. Two traction will need to be fixed to the caterpillar motor. Tie rods should be attached to the crossbeam, as well as the steering wheel and skis. Between the rods, you must mount the seat, as well as the front pillar. Making a snowmobile from a motoblock with your own hands, whose drawings are definitely worth exploring before starting work, it is necessary to use pins and bolts that will strengthen all the parts of the unit. On this we can assume that the snowmobile is ready.