Which of the tire fitting equipment must be purchased to open a tire repair business?

If very seriously and competently approach to the organization of the business of servicing cars, then it can be very profitable. Most entrepreneurs start a business with the organization of a tire fitting shop. It is profitable, fast, necessary. Services such as balancing, replacing wheels and tires, are constantly in demand among car owners. The number of cars is steadily growing, and even the simple need to replace tires in winter and summer can bring tangible benefits to the owner of the tire service. This is if you do not take into account the repair services. Let's try to find out with what equipment for tire fitting a start-up entrepreneur can start the business, decided to deal with this type of earnings.

The right place - the key to a successful business

Like in many other types of business, success largely depends on where and how the workshop or facility is located. The place decides very, very much. Since there are a lot of similar workshops in our country, most likely the best places are already occupied. But if you are lucky, you can successfully place the object near the roads, where a lot of cars pass, next to the gas stations. This arrangement will give you a constant flow of customers.

The choice of premises depends largely on what services will be provided and what equipment will be installed there for the tire fitting. For beginners, a suitable rental of a suitable room.

Range of services

Any tire fitting shop, except for directly changing rubber, also provides other services. The most popular among them is balancing, as well as adjustment of camber and convergence.

So, a beginning entrepreneur will have to purchase a balancing equipment for tire fitting. The price of a simple machine for balancing is about 1,5 thousand dollars. An ordinary stand will cost a thousand of the same money. Also for most services you need a jack, a vulcanizer, a compressor. Do not forget to consider consumables. We will review each type of equipment in more detail.

Tire Mounting Machine

The machine is designed for mounting or dismantling tires from the wheel rim. It should be noted that on modern machines for removing tires, serious efforts must be made - it is very difficult to do this manually, and sometimes it is simply impossible.

This type of equipment for tire fitting is divided into automatic systems or semi-automatic. Semi-automatic machine provides that the process of lowering the foot will be in manual mode. To do this, the operator must press the shaft at the top of it. Fixation of the shaft is carried out using a special mechanical device. In these machines, the table automatically rotates.

In fully automatic machines, the process of lowering the foot and the rotation of the working table are carried out by a pneumatic drive. Here, when working on such equipment, the operator will have to apply much less effort. This will increase the efficiency of the work. If you are planning large amounts of work, then this is an actual choice, because for such equipment for tire fitting the price is by no means two kopecks (from 100 thousand rubles).

Balancing equipment

These machines are simply necessary for a successful business. Without balancing in this matter simply can not do. The unbalanced wheel leads to a significant deterioration in the driving performance and characteristics of cars, as well as to various emergency situations. In addition, from the ride on badly balanced wheels, the chassis parts wear out much more quickly.

Modern balancing machines for tire fitting are rather high-tech equipment. It's not just a machine. It is equipped with special computing units. This automatic system allows you to make the balancing process faster and incredibly accurate.

Often the machines have a display, where the progress of work is conveniently and clearly displayed, There are models with laser positioning. The price of the machines is quite high, but the costs will quickly pay off due to the popularity and need for this service.

In addition to automatic models, there are also systems with manual drive, brake, manual input of parameters. These types of equipment for tire fitting should allow working on steel or cast discs. Devices can be attributed to the middle class. Their price is not as high as on automatic stands. Similarly, with a tire changer on automatic systems, it is much easier and more efficient to work.

Rolling jack

This is one of the most convenient jacks from all existing for today. These are not empty words, but the experience of many specialists. These devices are equipped with a fairly long handle. This allows much less effort on the drive and allows the possibility of standing. In addition, some models have a special pedal for quick lifting. When you press this pedal, this equipment immediately rises to the bottom of the car. This saves time and can increase efficiency, which is important for a small business. For the workshop it is best not to purchase systems with a carrying capacity of less than 3 tons.

To date, the simplest jacks of Chinese production can be purchased at a price of 10,000 rubles. There are more serious devices.

Also, to replace the wheels, use a lift for tire fitting. These are special platform systems. According to the type of drive, they can be pneumatic, electro-hydraulic or electromechanical. Their design is often scissor type. These units are relevant in the tire fitting shop, as they allow you to perform lifting on a small high-rise.

Vulcanizer

Still a long time ago this unit was considered a thing of first necessity in this kind of business. It is designed to carry out repair activities for tires and chambers. Modern equipment allows to provide opportunities for high-quality repair and restoration of rubber coatings. You can buy both domestic and imported equipment. For example, Chinese and German brands are especially popular.

To provide services to passenger cars, stationary units are used. If you need to help trucks, then it is recommended to purchase a mobile version.

Choosing a vulcanizer in the workshop, you should consider a few nuances. This is the size of the working part, as well as the operating temperature. For trucks, the vulcanizing apparatus has a slab size of 200 mm. As for the temperature, the higher it is, the more efficient and quality the service will be. Optimal temperature is from 120 to 150 degrees. Power is also important. For trucks it is very important that this parameter starts at 800 watts.

Some devices may have additional options. For example, you can directly affect the quality of the procedure. These options can be even for inexpensive domestic units.

Compressor equipment

How can you do without such equipment for tire fitting? In this business it is impossible not to mention it. It supplies compressed air with a large number of different tools. In such areas, a pneumatic tool for tire fitting is often used. It allows you to save on electricity, which is very useful for business.

For the normal operation of the whole complex, a compressor with a receiver of 100 liters will suffice. The capacity should not be less than 400 liters. The market of these devices are popular models from Chinese, Belarusian, as well as domestic manufacturers.

Washing of wheels

This service is not available everywhere, but it is quite in demand among customers. The prices for such a kit for tire fitting start from 5000 euros, but this amount will quickly pay off. Among the producers are the Polish complexes Wulkan. In addition to the aesthetic effect, washing can achieve higher balancing accuracy. This is an optional service, but it is no less demanded.

Various auxiliary tools

These tools include wrenches, hand tools, consumables for tire fitting. They can be either pneumatic or electric. Pneumatic deserve great popularity, since electricity tariffs for entrepreneurs are much higher than for individuals. The pneumatic draft wrenches are no worse than their jobs. Here you can even say more - electrical equipment when servicing cars is not used.

For cargo service, three types of these devices are distinguished. These are hand tools that have become popular among truck drivers. About pneumatic has already been said enough - they can be of any size, in manual or rolled-up performance. Electric wrenches are used only for servicing trucks.

You can also say a few words about the bath. It is not a first-aid thing, but with its presence it is much more convenient to search for damage on the pierced chamber.

Installation of tire fitting for pumping cameras and tires with nitrogen is still in the list of auxiliary systems. But more and more people are using this technology. Such installations can bring additional profit, they quickly pay for themselves.

For those who ride on good rubber, pumping into a nitrogen blanket will improve the safety of traffic and the handling of the car. Although the air itself is mostly composed of the same nitrogen.

Consumables for tire fitting

In addition to a complex of equipment for the provision of tire repair services , a number of consumables are also needed. Among the simplest, but indispensable, you can identify ramming loads, glutinous goods, patches, bundles, various chemistry, valves and caps.

As a conclusion

Today, this is one of the types of profitable business. Apparently, to open a workshop you need not so much. Such an enterprise will pay itself back in about 1.5 months, which is not enough for a small first case. Today you can buy a whole set of devices and tools, or you can buy a ready-made workshop. Profitability is guaranteed - you can not do without these workshops. Many people often need balancing. The tire service that can provide these and other services will very soon become a plus.