What is a "Bugler" stove with a water circuit and where it is used. Heating furnaces "Buleryan": technical characteristics and advantages

The boilers of the company "Bulerjan" appeared on the market for a very long time. Earlier this trademark was called "Laoterm". The first oven "Aqua Bulerjan" with a water circuit was equipped with a powerful heater. It was of excellent quality and in great demand. The furnaces "Buleryan" were suitable for large and small houses. Modern models are able to build a room up to 1000 cubic meters. M. The efficiency is at the level of 70%.

Furnace arrangement

In the upper part of the furnace there are heat exchange tubes. Under them there is a large secondary chamber, which is connected to the branch pipe of the chimney (it can be adjusted). On the back of the boiler is the primary chamber. It has an ash pan, as well as an ash-pit. To control power, manufacturers have provided a separate handle on the side surface. Also, the device has a door. Behind the front wall of the furnace is the injector.

What are the advantages?

First of all, we should note the high heat transfer coefficient. In addition , the heating furnaces "Buleryan" can boast of reliability. The fuel consumption of the models is small. All this allows consumers to save money. Also, mention should be made of the tightness of the device. All important components and components are securely hidden. Thus, the heating furnaces "Buleryan" can be called quite safe.

Model "Maxi 00": characteristics and price

This stove "Buleryan" with a water circuit has a power of 7 kW. The diameter of the chimney is 120 mm. The grade of steel used is 08 KP. In this case, the thickness of the walls of the furnace is 4 mm. The dimensions of this model are compact. The length of the furnace is 700 mm, the height is -480 mm, and the width is 685 mm. This machine weighs 175 kg. In addition, mention should be made of the high efficiency at 75%. The price of this model on the market fluctuates around 10500 rubles.

Where is Maxi 00 used?

This model "Bulerjan" with a water circuit can be used in any residential building. Such furnaces are installed in production premises. They work perfectly on any solid fuel. As a rule, firewood is used as well as briquettes. Thanks to the unique two-phase combustion technology, a single tab is capable of lasting a very long time. If you use wood, then 8 hours the device is able to work at full power.

Review of "Country 00"

This boiler "Buleryan" with a water circuit has a nominal power of 6 kW. For the removal of waste gases you will need to install a chimney. Its diameter should be not less than 120 mm. The recommended length of the chimney is no more than 7 meters. The furnace furnace is classified as closed.

Provides a floor installation method. The material of the heat exchanger is steel. In total, the device has two sections. As fuel, you can successfully use sawdust, peat, firewood. The coefficient of efficiency is 75%. The total mass of the furnace is 60 kg. The price of "Country 00" on the market fluctuates around 9300 rubles.

Areas of application of the model "Country 00"

The described furnaces "Buleryan" with a water circuit are more suitable for use in private houses. However, for a small warehouse, they also fit. In general, the installation of the oven is quite simple. Select the chimney should be based on the height of the ceilings in the building. The furnace can be installed in almost any room. This model is absolutely safe for human health.

What is the difference between the device "Country 02"?

These furnaces "Buleryan" with a water circuit have a high power. This allows you to build a room up to 200 cubic meters. The height of the furnace is 845 mm, width -560 mm, depth - 810 mm. The weight of the unit is 90 kg. The chimney for the furnace must be at least 120 mm in diameter. The body is made of steel grade 08 CP. Pipes of the device are bent on special dork equipment. At the same time there are no constrictions in the bending points. The diameter of the tube of the device is 76 mm.

Welding, in turn, is made semi-automatically. A machine tool for plasma metal cutting was used to make parts of this model . The manufacturer can order any color of the oven. It is also important to note that the stand is not included in the kit. It must be purchased separately.

This furnace can be successfully used in residential and commercial premises. The efficiency is 75%. At one refueling of firewood, it can work for about 10 hours. It is worth this furnace "Buleryan" with a water circuit (market price) 12000 rub.

"Classics 00"

The limiting power of this model is 6 kW. The height of the furnace is 700 mm, the width is -480 mm, the depth is 685 mm. The total mass of the device is 65 kg. Diameters of the chimney are allowed up to 120 mm. In this case, their length should be no more than 6 m. The furnace body is quite strong. A large loading chamber is provided. Its door opens quite wide. All this allows you to load fuel very quickly. In service this unit is simple. You can clean the ash once a week. Examinations of the chimney should be carried out at least once every three months. In this model, steel grade 08 CP is used. The diameter of the pipe in any place is 57 mm. This furnace is able to build a room of no more than 100 cubic meters. M. The cost of "Classics 00" fluctuates around 9500 rubles.

Characteristics of the device "Maxi 01"

This model is equipped with a furnace of a closed type. The lining is made of stainless steel. A chimney with a diameter of 120 mm is installed in the oven. The nominal power of the device reaches 7 kW. There are two sections in this model. The fuel should be loaded at least twice a day. Most often, sawdust or briquettes are used. The way of installation of the furnace is outdoor. The thickness of the case is 4 mm. Pipe welding is carried out semi-automatic. In this case, the traces of the seams are practically invisible. The efficiency is 75%. It will cost "Maxi 01" at about 9100 rubles.

"Maxi 02". Overview

This model of the company "Buleryan" with a water circuit has a strong case and a large loading door. The height of the furnace is 845 mm, width - 560 mm, and depth - 810 mm. The power of this model is at 14 kW. This is enough to build a building up to 250 cubic meters. Chimneys can be installed in various diameters.

In addition, mention should be made of the large mass of the furnace. This model weighs 120 kg. The diameter of the pipes in the device is 76 mm. The thickness of the metal in all sections is 4 mm. Used steel grade 08 CP. All parts are made on a special machine for plasma cutting. Due to this, the oven is completely sealed. Device management is convenient. The traction can easily be controlled by the lever, which is located on the side panel. The price of "Maxi 02" is 11500 rubles.

Model "Maxi 03"

The limiting power of this model "Buleryan" with a water circuit is 23 kW. It is more expedient to use the furnace in various shops or in warehouses with a total volume of not more than 250 cubic meters. M. The installation method is provided on the floor. The material of the heat exchanger is stainless steel. The manufacturer installed a closed type furnace.

The fuel must be loaded at least three times a day. Briquettes, firewood, and also peat can be used. Even recently, pellets have proved to be good.

The weight of this unit is 135 kg. The efficiency is at 80%. In general, this model can be characterized as powerful and productive. Use "Maxi 03" in private homes is not appropriate.

Overview of the furnace "Maxi 04"

Like the previous furnace, this model of the company "Buleryan" with a water circuit is extremely powerful. It is unprofitable to use it in small dachas. The oven stand can be ordered in any size. In addition, a loading door with a glass window is purchased (the appearance of the model will be greatly improved).

The weight of this unit is 165 kg. It works on wood and on sawdust. The download should be done approximately twice a day. In this model, steel grade 08 CP is used. The manufacturer provides a furnace of closed type. The nominal power of the device is 33 kW. Installation method - outdoor. The chimney for it is suitable for a diameter of at least 150 mm. The number of sections is two. The cost of "Maxi 04" on the market fluctuates around 15500 rubles.