Drinking system: basic characteristics and photos

By the expression "drinking system" means devices of a rather wide scope of use. These can be special filtering systems for the home or drinking systems for people who engage in different sports.

Stationary drinking system "New water E220"

This model is a filter for water, you will have to pay 2500 rubles. Its installation is carried out using a ball valve or tee, which are included in the delivery. The system is connected to the cold water main, which is often carried out under the kitchen sink. Purified water comes up through the crane to be installed. In these filters, water is taken from the water pipe, passes a chain of filter cartridges, and then is fed through a special tap. This drinking system is intended for complex purification of tap water from mechanical impurities like rust, sand and silt.

Additional features

The water after filtration will be freed from inorganic, as well as organic substances, heavy metals, chlorine impurities, which will depend on the modification of the filter cartridges. The latter are used in series, due to this they can have a different purpose and degree of purification. The stationary drinking water system has filters and is capable of providing excellent cleaning performance, it has a low cost and a huge resource. If we compare its value with the prices of bottled water, it can be noted that the price of water from such a drinking system will be 20 times lower. Among other things, its quality is often much higher.

The main characteristics of the drinking system brand "New Water E220"

The drinking system described above has many advantages, among them:

• Fixed connection;
• Multistage cleaning;
• A separate tap for clean water;
• Low cost of water at the output.

This plant is manufactured in Russia, so for domestic consumers, its cost is several times lower than similar devices manufactured abroad. The performance of this equipment is quite large, for one minute you can get 2 liters of water. The pressure can vary from 0.14 to 0.8 MPa, this is equivalent to a limit of 1.4 to 8 kgf / cm ² . During the installation, you will need to use plastic fixed pipes and fittings.

The main characteristics of drinking systems for a backpack

The drinking system can be represented by equipment that is intended for use in tandem with a backpack. These devices are convenient, efficient and efficient. The athlete does not need to stop or slow down to get a bottle, if you need to use the system, then you can drink water from the tube. However, it is important to think about how to choose such a drinking system, because one can be an excellent solution for a certain group of athletes, and the other will be completely unsuitable. In this case, it is necessary to take into account the activity that will affect the volume of the drinking system. For example, for climbers or backpackers, tanks up to 3 liters are suitable, which are represented by tourist drinking systems.

If we are talking about backpackers in good physical shape, cyclers or runners, then such a system will be strengthened on the belt, and its volume can be equal to one liter. Non-professional cyclists usually use 1 liter tanks, they occupy a small space, but cyclists can buy a small or medium system, which is installed a large enough tank with a volume of 2 to 3 liters.

If you are interested in a drinking system for a backpack, then you need to consider how much liquid ounces you will need during sports training. If the volume of the tank is equal to the limit from 1 to 1.5 liters, then you can use 34-50 liquid ounces. This choice will be a good solution for children, as well as people who travel around the city for short distances. Suitable reservoirs of this size for non-professional cyclists who are aiming to reduce weight.

The decision for the majority

The most common size of the tank is a two-liter volume, which allows you to get 68 fluid ounces. This is the optimal balance of volume and weight. This amount of water will be enough for most cyclists. If you do not want to stop during sports trips or bike trips to replenish the system, it is best to choose a 3 liter tank with 102 liquid ounces.

Overview of drinking systems for backpack

If you are interested in the drinking water system for a backpack, then you can pay attention to Cyclotech, which costs 700 rubles. This soft system has a flexible hose and a valve, the last of which is protected from leaks. The equipment has a passive valve. The outer cap completely eliminates the possibility of dirt and dust coming in during driving. This system will be convenient to use, since it is combined with a backpack, and the reservoir has an optimum volume of 2 liters.

As another option, you can consider the FFW MOLLE 70OZ hydrator, which is a real survival kit. This product is manufactured in the United States and has a camouflaged cover. Inside is a plastic container that holds approximately 2.1 liters of water. For convenience of use, the manufacturer has provided an elastic cover, which allows, if necessary, to connect the hydrator tube to a regular plastic jar. It is noteworthy that this drinking system can be used even in conjunction with a gas mask.

Another drinking system for running is HYDRAMAX 120OZ, which costs 1800 rubles. And has a camouflaged cover. The system is complemented by a pocket with a clasp. The internal container can hold up to 3.55 liters of water. The system can be worn on the shoulder straps behind your back like a backpack.

Characteristics of central drinking water systems

Such systems should ensure the receipt of water from natural sources, its further purification and supply to places of consumption. To perform these tasks, special facilities are used that include water intake components, water intake facilities, water treatment facilities , water lines and water networks, as well as towers and reservoirs. The systems of domestic and drinking water supply can vary depending on the natural conditions and the nature of water consumption.

The source of water supply, its capacity, character, water quality and distance to the water-supplied facility exert a huge influence on the water supply scheme. By the method of water supply, such systems can be gravitational, pumping or zone systems. In the first case, water flows by gravity, in the second, water is supplied mechanically, and in the latter - it can flow by gravity into some sections and by pumps - into others.

Centralized drinking water systems can differ in the nature of the sources used, for example, water can be obtained from lakes and rivers, artesian wells and springs, and also produced by a mixed type. If we are talking about cities and populated areas, then such systems are of a combined type, they are combined in the economy into fire-fighting water pipes. Of these, water also goes to industrial enterprises, if the latter consume a small amount of water.

Conclusion

The use of a drinking system of a combined type is justified in cases where the water supply network has a small number of branches, in which case water is only supplied to large water users.