Riveting pistol: description, user's manual

In working with lightweight finishing materials, small-format fasteners are often used. To fix thin metal sheets, chipboard or plastic panels, it usually does not make sense to use screws or nails, but the staples do not always prove to be the optimal solution. The best way to do this is to use rivets. Provided a correctly calculated step of the introduction of this hardware, you can ensure a neat and strong enough strength. The quality of the work will also be determined by the rivet gun used, which has different modifications and characteristics.

General information about a hand gun for rivets

This is the simplest version of the riveted tool, but this does not mean that it is inefficient at work. Such models usually have two handles and a pressure mechanism that works by physical effort. A more complicated modification is a pistol for rivets with large handles. If the user can provide a one-hand attachment in using the standard version of the tool, then in this case the pressure is realized by the force from both hands.

As for the performance and ease of use of hand-held riveters, here, indeed, not all is unambiguous. For serial long-term work with small hardware, this option may not be the best, since the operator's hand will quickly get tired. But, unlike battery and network models, the manual riveter has no limitations in terms of application conditions. It is wear-resistant in relation to mechanical influences, it is not afraid of moisture, it is easily cleaned of pollution and does not depend on sources of energy supply.

Varieties of hand models

Typically, the classic rivet design is described, which has been described above, rotary head devices and rocker-type modifications. The simplest version can also be strengthened by the ratchet mechanism, which facilitates the process of pressing the handles. Versions with a rotary head are advantageous in that they can be used in hard-to-reach places, where there are difficulties in terms of direction and positioning of hardware. The rock rivet gun has only one handle acting on the principle of a one-sided scissor mechanism. That is, the compression is not realized from different sides of the two handles, but in one direction. Just when it comes to the serial fastening of a large number of elements, this option will be the most convenient. For this reason, the rocker modifications are often used in the construction and production sectors.

What are rivets for a rivet?

The riveting material differs in size, material of construction and design. As for dimensions, the length of such hardware can be 6-20 mm, and in thickness - on average 3 to 6 mm. The material of manufacture is presented by metals, among which aluminum and steel. Aluminum rivets are considered less durable, but their use is justified when it comes to securing thin wood and plastic panels. With such fasteners, almost any rivet gun can handle, as the workflow requires a little effort. Steel models can be used in the installation of metal sheets, so the gun should be selected with the appropriate power capacity. In terms of design rivets can be divided into threaded and exhaust. Accordingly, the first option is a reduced variety of carnations, and the second resembles a small screw.

User's manual

Before starting work at the point of future installation of the fasteners, make a hole a drill. Then, the rivet head is inserted into the prepared tool holder. After that, it is very important to ensure the perpendicular position of the hardware relative to the working surface. When the positioning is completed, it is possible to exert force through the working parts of the rivet. As a result, the fixing head of the rivet must be formed from the outside, and the original ball-holder - from the inside. In order for the rivet hand gun to maintain its function stably, it should be serviced in the proper way. After each working session you need to clean, wash and dry the surfaces. Depending on the material of the construction of the structure, periodic treatment with protective oils may be required, which will protect the pistol from rust and other negative processes.

How to choose a rivet gun?

Pay attention to different design characteristics. Of course, the main one is to be able to support rivets of a certain format. Universal models in this regard are most beneficial, since they allow you to work with a wide range of diameters - on average from 3 to 6 mm. Take into account the implementation of the mechanism that captures hardware. As noted by experienced craftsmen, it is desirable to choose a manual rivet with a three-petal collet gripper system, which reliably fixes the working element. It will also be superfluous to take into account ergonomic features. This refers to the number of attachments in the kit, the material of the frame and the weight of the tool - the easier it is, the easier it will be to produce serial operations.

Conclusion

The system of rivet fasteners per se is considered one of the best for several reasons. Its main advantage lies in the fact that with a minimal content of foreign material in the form of hardware, it is possible to provide a high degree of fastening. And from the outside, and from the inside there is only a small fixing point, which practically does not spoil the surface appearance. Unlike nails, screws and screws, a rivet gun provides two-sided fastening of the material, on which the reliability of this technique is based. Another thing is that it is not always possible to implement this method technically. It is suitable for use only in cases where it is possible to drill a preparatory hole and exit to the reverse side of the working base.