How to take a water meter reading: tips

Russian industry produces several types of water meters: vane, tacheometric, electromagnetic. These devices measure the resource consumption regardless of its density and temperature, but count The average speed consumption and the area of the jet passing through the device. If an apartment is installed in the apartment, the tenants start paying only for the volume of water that they actually used up during the month. How can I read the water meter ?

Tenants are obliged to record the testimony themselves, occasionally providing an opportunity to check the devices for the employees of the relevant control service. It is not difficult to fix the data, but it is worthwhile to figure out how to take the water meter readings. First of all, it is necessary to understand what the numbers mean on the scoreboard.

On modern indicators there are nine categories of volume indicators. The last two orders are red. Ahead are the black numbers. And the red ones, if the water is on, run, replacing each other, as quickly as the pressure in the crane is strong. These figures are in real time Show the amount of resource used in liters. So how do you take the water meter readings? These red numbers when you submit data on the consumption of liquids in your apartment are written after the decimal point. Before the comma, write a number that recorded the indicators of black color. This is cubic meters. On this knowledge of how to correctly read the water meter , ends.

By the way, liter - red scale - can be used to check the correct operation of the device installed in your apartment. Look at the meter on the water, remember the indicators, then pour, for example, a ten-liter bucket, and look again at the readings. If the quantity you poured into the container is shown, the counter is working. If not - it is necessary to call a specialist.

Specialists of the EIRC offer three methods of data submission and payment:

- monthly to take testimony, fill out a special form, refer it to the local Unified Information and Clearing Center and drop the data into the box;

- take login and password for entering the personal cabinet on the site of the Unified Information Center and transfer data from the house via the Internet to the EIRTS website;

- agree on a monthly invoice for a certain amount of water being consumed with a recalculation of the meter readings every six months or a year.

If the choice fell on the first option, you must enter the data in the receipt, enter the meter readings in the previous month. The last - you can write out a receipt for payment of utilities. Filing through the Internet is carried out as follows: you need to go to the EIRTS website and fill out the "Form for the transfer of evidence", which indicates the account number, address and phone number. Further, the graphs must be filled separately for each hot and cold water counter. First, the readings for the previous month are recorded, then the current data. A period of time is set for the transfer of information to the EIRC. Usually it's about two weeks.

I hope the article helped in the question of how to take the water meter readings.