We sew slippers-bunnies with our own hands

Today you can buy almost anything you want. That is why manual labor has recently become very appreciated, and so-called hand-made products are quite expensive (both from a material and from a slightly different point of view). In this article we will talk about how to sew slippers-bunnies with their own hands.

Preparation

First of all, you need to stock up on certain materials. So, in this case, you need a warm cloth (fleece for the outer and inner side), leather or dermantine for the sole, as well as sewing accessories.

How to sew slippers "Bunnies": pattern

First of all, you need to prepare a pattern of the product. It will be necessary to cut out four basic details: the sole, the rectangle for the shaft, the piece in the form of the English letter U, and also the detail in the ear. As you can see, the preparatory stage is not so complicated. By the way, you can make your own adjustments and sew the slippers-bunnies with your own hands, somewhat different from those shown in the photo above.

Inner boot

Begin to sew slippers-bunnies with your own hands better with an inner boot. To do this, you need to transfer the pattern to the fabric and cut it out with the allowance on the seams (1 cm). Now you need to attach a rectangular piece (bootleg) to the U-shaped flap (hug the very leg) with pins, as an option - just sweep. The fabric is put face to face, then the place of spalling is spread on the machine, as is sewn with a stitch and the back part of the boot. By this principle, you need to prepare and the sole (only here the product stitches the back to the back). You can attach a lining to the foot of the lining, if the house is pretty cool. Now you need to sew the sole to the rest of the product. To do this, the detail-stop is carefully inserted into the place prepared for it and swept out, beginning with the toe. Next, you need to stitch the product in a circle, cut off excess allowances and sweep the bottom (you can do this with a "zigzag" line on the sewing machine, but it's better to use the overlock if there is such an option).

Outer boot

We make slippers-bunnies with our own hands further. Now we need to prepare an external boot. It is done exactly the same as the inner one.

Ears

We make ears for slippers. To do this, two cut details are sewn face to face, and then they are turned out. At the top it is recommended to put a stitch at a distance of 5 mm from the edge to make the product more durable and cute.

Connecting parts

Now we need to understand how to sew slippers-bunnies, ie, to connect all the details together. It will not be difficult to do this. First of all, you need to sew the ears - they are inserted between the inner and outer boot (it is important to properly mark them, the right side up). The product is stitched around the shaft. However, the seam is not stretched to the end, because it will be necessary to unscrew the product. At this stage it is important to sweep all the seams, cut off excess. Now you can unscrew the sneakers through the hole left, cover the hole with secret stitches. That's it, the product is already ready!

Decor

You can also make cute folds on the front of the sneaker. To do this, you need to stitch a small piece in the center of the sneaker and pull the product down the bottom thread. Thread and fasten and hide. You can also sew a nice hare's tail - a funny pompomchik. Well, no one forbade the use of a variety of accessories in their work. Want a glamorous bunny? Why so much easier! Sequins, beads, rhinestones, all sorts of ribbons-bows - which only does not exist in modern stores! Create, invent, try!