We make garden shredders with our own hands

Now in the shops there is a lot of equipment used in the garden and vegetable garden. What is just not invented in the world - and motoblocks, and trimmers, and lawn mowers, and automatic sprayers! However, listing the list of useful tools and instruments, we did not mention such a useful thing as a chopper for wood and grass. It is always useful if you have at least a couple hundred square meters of land or your own lawn. But the price of such devices is sometimes too high, and the owners need to make garden shredders with their own hands. In this issue, we will try to figure it out today.

How to make garden shredders with your own hands: instruction

It should be noted that such devices as shredders have practically the same principle of operation as simple kitchen combines. The whole process of processing wood and grass takes place in a cylindrical container, where sharp knives, spinning in a circle, grind the product to the desired state. Therefore, you should not have any difficulties in constructing this tool.

The first step is to weld the frame to the device. For this, it is necessary to prepare several steel pipes and, using electrode welding, to connect them together. By the way, the frame can also be taken from a conventional vacuum cleaner of Soviet times.

And now we will touch on the main part - the engine. As a power plant for a chopper, it is possible to use both a gasoline and an electric motor. However, many prefer to use the same petrol, because it is more economical in terms of efficiency for garden works. Electric devices consume at least 3-4 kilowatts of electricity per hour. Therefore, this is not the best option for a power plant. To save time, you can take the finished motor from some other mechanism, for example, from a chainsaw. The bought engine should be fixed on the frame of the device, and it can be connected with the construction using a conventional belt and an automobile pulley.

Circular saws

Doing a chopper with your own hands, do not forget to purchase a set of circular saws. Do not skimp on them, because low-quality tools on the first day may simply be dulled. The diameter of metal discs can be very diverse - from 6 to 10 inches. We advise you to purchase the entire set at once, so that the chopper can then work not only with the branches, but also with many other waste products. When you do garden shredders with your own hands, remember that the wheels should be fixed to the steel axis using a plastic washer. Directly on the mechanism they should not be installed. At the same time, the diameter of the steel axis should be about 2-3 centimeters.

Conclusion

Everything, at this stage, the question of how to make garden shredders with your own hands, can be considered closed. In addition to the finished device is good to attach the stop bar - in order for the processing of the branch rested against it.