How to fill the ink seal correctly?

Sooner or later, in any office or office, the question arises: how to fill the seal with ink. It would seem that a fairly simple occupation requires a person, his performing, certain knowledge and skills.

Types of seals

To know how to properly fill the seal with ink, first you need to figure out what kinds of ink are there.

We all remember from the childhood stamp prints. They are easy to use, but not entirely convenient. Together with the very stamp, you always need to wear a stamp pad, which is in a separate box. This is a good option, if you use a seal in one workplace, but if you need mobility, it is worth paying attention to other types.

Printing with automatic snap is more practical in application. It is both compact in storage, and more convenient for making clear and even prints. But with it some difficulties are possible, because you need to know clearly how to fill up the automatic printing.

The most difficult thing is with flash stamps. In their design, a pillow with paint is not foreseen, which is charged directly into the matrix itself. In addition, this type of seal often happens in several colors, which further complicates the task.

What ink to take?

Before you correctly fill the seal with ink, you must select them. The most optimal option, if you take the paint of the same manufacturer that was used before. But not always there is an opportunity to learn her brand. Therefore, it is worthwhile to approach the issue carefully.

Inks are divided into water, oil and alcohol. For official documents in offices, the most common ones are used - on a water basis. They are well absorbed by the paper and are not smeared. But the moisture can flow, which indicates the nature of their basis.

Spirituous ink is used for non-porous surfaces, such as glass and metal. A characteristic feature of these paints: they dry quite quickly, are not smeared and hard to wear off the surfaces.

Oil ink is the least common. They are used in production for marking parts and boxes. They behave well both on a porous surface and on a smooth surface. On paper leave a massive greasy trace.

When you decided with ink, you should not forget about their color. It is strictly forbidden to mix different colors on one pillow. Now you can consider in more detail how to fill the seal with ink.

The simplest options

Strangely enough, today, quite often, the most simple form of stamps is used, which require a separate stamp pad. Handling them is the easiest.

Open the box with a porous substance and gently drip on it a small amount of paint. The main thing is not to overdo it, otherwise the prints will look like blots, and their text will not be legible.

We wait until the paint is distributed evenly over the surface. If desired, this process can be speeded up by stretching the ink on the surface with a paper clip. After the porous substance is completely soaked, we make several proofs. If the seal makes them clear, then everything is fine. But there may be other options.

If the prints are not clear, you need to add a little more ink and repeat the procedure anew, because you already know how to fill a stamp.

When the prints are blurred, the ink is too much. They are removed by any porous paper, such as a tissue or toilet paper.

How to fill in the automatic print?

Stamps in mechanical equipment are characterized by the fact that they do not see a stamp pad. To get it, you need to show some skill.

Slightly press down on the bottom of the mechanism and use the buttons to lock it in such a position that you can access the pillow. With a light touch of a finger in the side, pull it out of the snap and put it on a flat, clean surface.

Next, use a syringe or a special bottle with a thin nose, apply ink about 2 mm thick. Use a paper clip or similar device to spread the paint over the surface and allow it to soak. Remainder of ink remove with a napkin or handkerchief.

After an hour or two, put the pillow back in place and make a few prints. If you did everything correctly, they will be clear and bright. The main thing at the time of refueling is to ensure that the pillow itself does not get dust, dirt or villi.

Highest level of skill

The hardest thing to understand is how to fill a flash print. The thing is that she has the most unusual design. First, we will disassemble it, having removed a fixing ring with a knife. Next, put the matrix on a clean substrate on an absolutely flat surface. Using a syringe, gently drip the paint on its surface and try to distribute it evenly.

To print completely soaked, you need to leave it for several hours, and then check by making a few prints on a blank sheet of paper. But before that, it is still necessary to remove excess moisture on its surface. This is done by good porous paper.

If the quality of the prints suits, you can collect flash-printing, repeating the reverse of the disassembly of the action. If the prints are not clear enough, it is necessary to refill the porous material of the stamp.

Multicolor printing

Already it became clear to everyone how to fill the seal "Copy is true", "Sold", "Paid". After all, they use only one color of ink. But there are some stamps with colored cushions. They are filled in the same way as monochrome, but with some features.

First of all, you can not mix colors. The easiest way is to fill each ink individually. First it is applied to the central part and evenly distributed. Here it is worth very carefully to ensure that it does not pereblivit, otherwise it will go beyond its zone.

After one color is absorbed, we perform the procedure with the following. And so on until all the zones are filled up. Will go to this procedure a decent amount of time.

Flash prints of two or more colors are refilled from the side of the print. First, the central part is poured, and then its edges. Here, too, you need to be extremely careful, so that the colors remain in their zones.

Common Errors

And now we will consider options how to fill the seal with ink can not. After all, its quality and service life depend on it.

In order not to be fooled with the dismantling of the rigging, many office staff drip the paint directly onto the die. This is not correct for the reason that the ink pad contains insufficient ink. It is also not distributed evenly.

It is also not recommended to drip paint into a pillow not removed. This does not allow you to control its quantity. The ink can not soak well too.

You can not dunk the pillow removed directly into the paint. This way you will oversaturate it and spoil it. Also, it is not advisable to do this with a flash print. The effect will be the same.

To ensure long stamps, they need care and proper charging of the pillows.

Some subtleties

The option describing how to fill a rectangular seal, as well as a round one, does not always take place. First of all, the official stamp of the enterprise is never refueled. It changes the pillow every time. This is due to the fact that the color and composition of the impression should always be the same.

It is not recommended to refill the pillow more than three times. During a long period of operation, dents remain on it, which significantly reduce the quality of the impressions.

Also, many manufacturers generally do not recommend adding ink to stamp pads of automatic equipment. According to them, the pillows themselves are not designed for this and still will not give as clear impressions as new ones. But this nuance is more of a commercial nature, because the pillow is more expensive than a bottle of ink.

When working with any stamps, you must be extremely careful and avoid the slightest chance of contamination, because dust, sand and hair will significantly affect the clarity of subsequent prints.

Trust the professionals

Finally I would like to remind you that everyone already knows how to fill a seal with ink, but not everyone can do it. This is especially true for complex multicolored stamps. Therefore, in order not to risk big money, it makes sense to turn to a special service that will do everything for you. At the same time, you will spend a symbolic amount, much less than that you will have to pay for a new snap or print. This is just the case when the risk does not justify itself.