Underwater camera for winter fishing with your hands from your smartphone

Until quite recently, fishermen had no idea about the existence of such a device as an underwater camera. Today, many fans of this type of recreation could appreciate the presented device in the conditions of the reservoir. Although there are many fishing enthusiasts who are skeptical of such innovations. However, such a device provides a lot of opportunities for its owner.

Underwater camera for winter fishing with their own hands made allows you to save money from the family budget. It will provide an opportunity to assess the relief of the bottom, find the best place for fishing, to find the best tackle. The camera will allow you to see how the fish reacts to the bait, Therefore, every lover or professional will be interested in how you can make such equipment yourself.

Benefits

Underwater camera for winter fishing with their own hands is mounted quickly enough. Before starting such work it is necessary to consider what advantages such equipment provides in a reservoir. More often such devices are necessary in the winter. To get information about a specific fishing area, the camera falls under the water. It provides information on the presence or absence of fish under ice.

Also, the camera provides information about the exact state of the reservoir. During the research it will be easier to determine the depth, the amount of aquatic vegetation. Based on the results obtained, the fisherman will be able to choose the optimal type of fishing, bait.

Among other things, the camera provides an opportunity to monitor the behavior of fish of different species, their reaction to a particular bait or bait. This allows you to control the process of catching. Also the equipment will allow to observe activity of underwater inhabitants.

Device Features

Underwater camcorder for winter fishing with their own hands is created by analogy with special devices, which are now presented in stores. Such equipment has a number of distinctive features. The camera is fully compatible with conventional types of ground-based instruments. However, for shooting under water, you need to ensure a good backlight. Otherwise, it will be difficult to make out anything in the water column.

The camera body, for obvious reasons, should be waterproof. Therefore, deciding to create such a device from a smartphone, you need to think carefully this question. Today, the equipment of some manufacturers is on sale, which has the ability to stay under water for a long time. However, in most cases, the smartphone is required to provide full protection against ingress into the water.

The optical device is immersed in water. On the cable, information from the camera is transmitted to the monitor. In purchased models, it is possible to rotate the tracking device. However, homemade devices have somewhat limited functionality.

Functionality

Purchased models may have a number of specific functions. The cost of such devices depends on this. On sale you can find cameras, the price of which will be from 6 to 45 thousand rubles.

Underwater video camera for winter fishing (it's quite simple to make it by oneself) should correspond to the basic qualities of the purchased cameras. First of all, it is necessary to pay attention to the depth of immersion of the tracking device. For this, the housing must be sufficiently tight. The chamber will have to withstand increased pressure.

From the degree of sensitivity of the optical device will depend on the appropriateness of using it on the pond. This indicator should be quite high. You will also need to create suitable lighting. It should not be too dim, otherwise the camera will not be able to catch all the details. The high brightness of the flashlight is also unacceptable. Fish will be afraid of this kind of lighting.

Among other things, the device should not react negatively to severe frost. Otherwise, it will not be possible to use it in winter fishing conditions.

Is it worth creating a camera yourself?

A homemade underwater video camera for winter fishing has both advantages and disadvantages over its purchased counterparts. Many fishermen decide to create a similar tracking device because of the high cost of the devices on sale.

To make a video camera for underwater surveillance of a sufficiently high quality, it is necessary to prepare the corresponding structural elements, as well as to have experience in handling electronics.

If the tracking device has insufficient quality, then video surveillance will also be difficult to perform. Therefore, the components of the system must be characterized by certain parameters.

Best of all for such purposes are suitable mobile phones or smartphones. This is due to their compact size and light weight. A USB cable is required to connect the camcorder to an electronic device. For normal operation of the system, it should not be longer than 5 m.

Necessary materials

A homemade underwater video camera for winter fishing with their own hands is assembled from certain components. They must be prepared before starting work. Preliminary it is necessary to estimate quality of all components of the system.

A car battery is suitable for powering the system. For a trip to a reservoir on your vehicle this option will be preferable. One of the most important components on which the quality of the system will depend is the hermetic container for the smartphone. His choice should be given special attention.

In addition, you need to prepare an extension cable, inverter. The mobile phone camera should have good photosensitivity. To create a sinker, a piece of lead is suitable. To make the correct illumination in the water, you need to purchase ultraviolet diodes.

Also you need to buy superglue, sealant, and also insulating tape. Next, a homemade underwater camera for winter fishing is assembled under a specific instruction.

Camera Selection

A good underwater camera for winter fishing with your hands from a smartphone is done quickly enough, but requires a careful approach to choosing an optical device. It should be small and very light. This will allow you to better manage it in the water.

When selecting a camera, you need to pay attention to the quality of shooting. The picture should be clear. Otherwise, it will be hard to see anything in the dark water. Also, the chamber must withstand high pressure in water.

Features of the screen of the smartphone should also be given great attention. It should be large enough so that the fisherman can see all the details of the image. Reliable devices are produced by proven, well-known manufacturers. Therefore, when choosing a smartphone, it is better to give preference to such brands.

Beginning of work

After preparing the required components, an underwater camera for winter fishing is collected. Make it yourself with the hands of the device will be easier on a verified instructions.

First, you need to prepare a monitor to which the image will be output. It can be a car rear view camera or a DVR. Further, the serviceability of its operation is checked (there should be no interference).

Next, you need to configure the camera and put it in a waterproof container. On top of the plastic you need to punch a hole. Through it a wire will approach the smartphone. It must have an appropriate protection class to be able to be used underwater.

Creating a device

A homemade underwater camera for winter fishing (it can be done by each person by its own hands) requires the use of a lead weights. Long pieces of material should be put on the bottom of the container with a smartphone.

Make holes in the top of the container to create a backlight. By soldering the wires are connected to the circuit with the power cable of the smartphone. All the places where the sealing of the packaging have been broken, it is necessary to grease with sealant and wrap with electrical tape.

The system must be powered by a car battery. It should be well-charged. The cable for immersion also needs to be wrapped around with an insulating tape. No drop of water should enter the container with the camera.

Using the device

Underwater camera for winter fishing (you can make it by yourself within an hour) should be submerged to the required depth during operation. For this purpose, the device is lowered into the well. The fisherman holds her by the cable. The camera should be 8 cm below the hook with the bait.

When the appliance is immersed in the required depth, it is necessary to wait a few minutes. Visibility will appear when the particles of water in the water are in the water, sand will sink to the bottom. Then you can explore the relief. The camera then folds to the bottom so that the bait hook is visible.

The well must be cleaned constantly from ice. When lowering the camera, it needs to make a 360-degree turn every 20 cm of the dive. This will give an idea of the situation under water. It will be possible to drill another hole if there is a fish in this place. It will drop a hook with bait.

Having considered how to create such a device as an underwater camera for winter fishing with your own hands, you can create an excellent device for monitoring the inhabitants of the reservoir. Recreation in nature with the participation of such a device will be interesting and exciting. With the right approach to the use of such equipment, there are all chances to return home with an enviable catch.