The manufactured boxing pear with his own hands will serve for a long time

In the modern world there is nothing that can not be bought in the store. But there are lovers who want and can do the necessary thing with their own hands. It does not matter if it's a hothouse in the country or some kind of sports equipment. In this article, we will talk about the punching bag.

I think the manufactured punching bag with its own hands will be no worse than the one purchased in the store.

The material for this sports equipment can serve as old leather things, for example, a jacket, a raincoat, a coat, boots. In a word, everything that you have.

The skin is quite strong material, it does not smear, and if this happens, then it is easy to clean. When applying strokes on it, the hands remain unharmed, that is, there are no abrasions.

In addition to this material, the punching bag with its own hands can be made of a dense fabric, tarpaulin or other similar materials. But we will stop on a leather pear.

First of all, you need to prepare a material about 1500 mm in length and one meter wide, of course, you can do more, it's up to you. Fold it in half and stitch the vertical seams. There should be two or three of them. We also sew stitches two or three times. Next, around the circle, we sew the bottom. It must be semi-circular. Then we prepare in the same way two more bags, but each subsequent bag should be smaller than the previous one by 0.5-1cm, since the bags will be inserted one into one. This is done for strength and to prevent the appearance of dust. For insurance, the seams can be glued.

The next question: what to stuff a boxing pear, what kind of filler? Here, how will your fantasy work. You can use as a filler small non-sharp stones, pebbles, chopped rubber tires. But, as advisers advise, shingle is the best. To fill a pear it is necessary so that there was no empty place. To do this, use sand. Since it is free-flowing, it together with pebbles will give a good result. The pear turns out strong, heavy and hard. To compact the entire mass, drop the bag several times and hit it against the floor.

In the upper part of the pear, a fastening ring is sewn, which later, with the help of carbines, will be fastened to the rope or chain.

Now you need to think over the mount for the punching bag, it should be reliable.

If you want to hang a pear in an apartment, then it should be smaller than the sizes mentioned above, so the fastening will not be so difficult to manufacture.

You can use welding to make a plate, weld a ring to it, and make four holes for fixing to the ceiling.

Made punching bag with your own hands, should not spoil the interior of your home, so it is desirable to hang it in a special place. The most optimal solution is the installation of this sports equipment in the garage. Here you can hang your handiwork, close in parameters to the professional punching bag. Mount to the ceiling should be so. A hole is drilled in the slab of sufficient diameter so that a pipe with a diameter of 25 mm can be inserted into it. Usually the floor slabs are hollow, so it is not difficult to insert a pipe. Then, after installing the pipe, let's pass through it a chain, which is fastened to the pear. This is the most reliable fastening: the manufactured boxing pear with its own hands will serve for a long time until the leather cover bursts.

There is another option for making a pear for a small room. This is a boxing pear in the form of a real pear, mounted on a rack. Just take leather material, sew bags, insert one into one and fill with pebbles and sand.

Chromed pipe is selected, fixed to the pear with one end. The other end of the pipe must be secured in a powerful base. What is good about this option? You can carry the pear from place to place.