The article tells how to sew a chevron

Probably, everyone who encounters stripes for the first time, wonders how to properly sew a chevron. It is not so difficult to do this. There are several ways of telling how to sew a chevron. The following are the simplest and most effective of them:

1. Using a thread and a needle.
The most common and reliable way.

2. Using velcro tape.
This method is very convenient when you often have to change the stripes.

3. Using hot melt.
Can be attached to both the finished product and the pattern. But for this it is necessary to have a thermal press. If you use only the iron, then the fastening will be short-lived.

Often there are questions about where to sew the chevron. Usually it is sewn on the shoulder so that the surface is completely snug to the clothes and not hanging from it.

How to sew a chevron

There are several techniques for sewing chevrons, you can try them all, and you can choose one - liked.

1. Manually.

First you need to stock up on the necessary materials: pins, scissors, chalk. As a rule, chevrons are ready for sewing. They are edged and thermally treated to prevent tissue shedding. If, for some reason, the edging is missing, then we cut off the edges of the matter, leaving the margin for the hem. It is necessary that in the future the chevron should have an aesthetic appearance. Then we work the bent edges of the fabric with a ready iron. Everything, the badge is ready for sewing. The ready strip is applied to the right place, fixed with pins and begin to baste. When the design is done, try on the clothes to fix the defects, if any. If everything is in order, then the chevron is sewn tightly. After completing sewing, the patch can be sprinkled with water and ironed to make it look more organic on clothes.

2. Semi-machine way.
Another good advice is how to sew a chevron. To work, you will need the same tools as with the manual method. Only a sewing machine will be added to them. In a similar way, preliminary preparation of the chevron is carried out.
Next, we mark the beginning and end of the line with the help of chalk. We tie the chevron back. Then you should bend the patch and sew it by hand. With this method, the seam remains invisible.

3. In the machine way.
The tools are again the same. But during preparation, you should leave a little more tissue. 1-2 mm will be quite enough. These remaining millimeters and serve as a place for the seam, and, the seam should be zigzag. In this case, the useful part of the patch will be visible and not affected by the machine line.

All these methods tell how to sew a chevron.

But it can be attached to the fabric in other ways. If you use hot glue, then apply the iron very carefully and hold it until the glue is impregnating the fabric, and the patch will not stick to it. Using velcro tape, you can glue the strip as many times as you want, until the adhesive coating has lost all its properties. To do this, you just have to separate the protective strip and press the chevron to the fabric.

The choice of any method depends on what you want to get in the end, but all these effective options are great for fixing the chevron on clothes.