Roller shutters with their own hands: installation (installation), repair. Roller shutters for the cupboard with their own hands. Gate-shutters with their own hands

Roller shutters are one of the types of blinds and have the form of a roll with two guides. The latter run parallel to the plates. Roller shutters with their own hands can be installed in window, garage, as well as doorways.

Roller shutters application

For a long time, shutters have been popular with consumers. Today they are installed not only in residential buildings, but also in commercial premises. Roller shutters have a wide range of applications. They are used to protect the room from excess light, dust, noise, hacking, as well as effects of various nature, including mechanical and chemical. Such structures are very similar to conventional blinds, but they also have protective functions. With all this, this addition can be an excellent decoration not only of the window, but also of the doors. You can set the shutter function to adjust the light intensity. If the sun's rays illuminate and heat the room too much, the design can be lowered to a certain height, whereas at night it will close automatically. If you decide to install roller blinds with your own hands, you should be aware that this type of construction has also good thermal insulation qualities. This can be seen if you look at it in a section: the elements inside have air chambers, which are sometimes filled with foam. Both of them perfectly retain both hot currents and cold air, which guarantees an ideal climate in the room both in winter and in summer. Before you install roller shutters with your own hands, you need to familiarize yourself with all their pros and cons. Among the first, it can also be noted that such structures are easily installed, and can also be equipped with one of several control systems. For example, manual designs are used for private use, whereas for the protection of industrial and commercial premises, structures that are controlled by electronic systems are purchased. It is also important how the shutters look. In addition to performing their basic tasks, they can improve the exterior of the house. When buying, you can choose not only the color, but also the texture of the material.

Roller shutter installation features

If you decide to install roller blinds with your own hands, then you must choose one of the existing methods of mounting the structure. Thus, you can mount roller shutters using an external method, which is also called a waybill. This technology is most common when compared with other installation methods. At the same time, the installation involves fastening to the facade of the building, and the guides are installed on the sides. Highlighting the advantages of such an installation, it can be noted that the size of the opening will be retained. This means that in the open condition the roller blinds will not be visible from the room. As a minus can be called a slight protrusion of the box for the outer surface of the walls. The shutters can also be built-in. The guides are fixed inside the opening, which is closed on both sides by the width of the guides. The box must be mounted in the opening, which will be closed from the top. If you decide to purchase roller blinds, the installation by your own hands can be carried out and using a combined method. In this case, the guides should be fixed inside the opening, which ensures that it closes from two sides to the width of the guides. The box must be in the recess of the opening. To install protective roller blinds for this technology, you need to follow certain rules. In some cases, there is a need for special preparation of the opening for the installation of the structure. If the opening is clean, then the height of the structure should be increased by the width of the bar, this parameter is equal to 45 millimeters. If the opening has irregularities, then not only the height, but also the width of the structure should be increased by 8 millimeters.

Roller shutter technology

Before starting the installation of roller blinds, it will be necessary to carry out certain preparatory work. Initially, the opening must be measured, its diagonals should be compared to understand if these parameters differ by more than 5 millimeters. It is important to analyze how correctly the slopes are located, the permissible deviation from the horizontal or vertical is 1.5 millimeters per 1 meter. On the surface of slopes there should be no chips and cracks, and if they are plastered, the finish coat should not peel off.

Preparation of guides

Before you make roller blinds with your own hands, you need to prepare the side guides. To do this, markings must be made for drilling holes. In order to ensure symmetry, they need to be laid in pairs: make holes in steps of 15 centimeters from the edges of the guide rails, and only then along the entire length with an equal interval of 50 centimeters you need to make holes. If the installation type has been selected, the holes must be made closer to the outer edge. When carrying out these operations, a drill with a diameter of 8 millimeters should be used. If the installation is carried out by external technology, the through-hole of the tire must be made on both sides, while the upper tire must be drilled until a diameter of 11.8 millimeters is obtained. This manipulation is necessary in order to mount the decorative plug.

Preparation of the box

If you decide to install the roller shutters on the gate with your own hands, then the box on each side must be drilled in such a way that the two holes are laid through the cover, their diameter should be 4.2 millimeters. They are necessary for installing rivets after completion of work. Among other things, you need to make holes to fix the box. For surface mounting, the holes should be located at the rear, whereas with the built-in top, the combined installation involves making holes on both planes.

Assembling the box

If you install roller shutters with your own hands, then the next step is to make a markup for the holes in which the fasteners will be installed. The box is applied to the opening. For surface mounting, all elements must be attached to the wall, with built-in installation parts are located on the side and upper slopes. Next, you need to check how much vertical the guides are, and whether the box is properly mounted in relation to the horizon. Markings on slopes through drilled fixing holes must be made with a marker. They need to drill holes, and then drive in the dowels. The hole must be made for the drive.

Fixation of the frame

If you decide to install roller shutters for the closet yourself , the technology will remain the same. The next step will need to strengthen the frame. First of all, remove the protective film, which is located on the back wall. Fixation should be carried out with a screwdriver, then you can lock the controls. If an external type of installation is used, the controls must be located indoors. Then you can install the cloth, and then the lid of the box, which is fixed with rivets with a gun. All openings must be smeared with silicone sealant, and then closed with plugs.

Repairs

If you notice a malfunction, which is that the web is going unevenly (this happens, as a rule, more often), then repairing the roller shutter with your own hands can easily be done. To do this, check the guides for foreign objects. Among other things, the guides may be damaged. But, as a rule, after the removal of foreign elements, the uniformity of the stroke is returned.