How to remove a magnet from clothes

Often upon returning from the store, buyers discover magnetic clips on the purchased items. Negligent sellers simply forget to remove the magnet from their clothes. And, in violation of all the rules, the output for some reason does not "squeak". How should we proceed in this case?

The first tip is that the buyer should return to the same store where the thing was bought, present a check and a thing to the seller. Best of all, when the clip removes a specialist who has the necessary device for this.

However, there are cases when you can not return to the same store: for example, the purchase was made in another city or the check is lost. The question arises: how to remove the magnet from the clothes of the house in this case?

This question is not at all idle. After all, among other things, often the clip is filled with a coloring liquid. Therefore, sometimes such an unpleasant incident occurs that a buyer, having discovered a magnet at home, starts, with the help of a chisel and a sledgehammer, using the old Russian habit, to correct this oversight. The plastic clip breaks, and the paint spoils a new, sometimes expensive thing. It's a shame!

Although some share their advice, how to remove a magnet from clothes and not spoil it. For example, it is suggested to cut the head of the clip with a metal hacksaw. To insure against staining, keep the clip with the hole facing up. Having made two oblique incisions, it is necessary to take off the hat and to pick out the mechanism.

There is another option, how to remove a magnet from clothes, which also offer Internet users. They offer more feasible to hit the clip on the floor with a convex plastic side. After the impact, the magnet flies by itself.

However, this option is extremely dangerous just for those cases, if the clip will be filled with paint: after such removal of the mechanism, the thing will probably be spoiled. Therefore, those who shared their experience, it is worthwhile to understand: he just got lucky!

Someone uses bokorezami for "liberation" of clothes. Someone heats the "navel" with the flame of the lighter until a hole is formed, through which the chip's internal parts are pulled out. And someone just pliers bent the edges of the clip, pulled out a white ring that ran along the contour, and as a result, easily separated spring and carnations.

All tips how to remove a magnet from clothes with the help of mechanical actions, although they can lead to a positive result, but have a certain risk of damage to the product. Therefore, the optimal and safe specialists consider the option using a strong magnet.

For this procedure, you need to acquire, in fact, a strong magnet. It can be taken from the used hard drive from the computer. They will need about 4 pieces. Sell hard drives used on the radio market for 50 - 200 rubles. Of course, buying 4 disks of 200 rubles to demagnetize a beeper with a thing at a price of 1000 rubles is a dubious pleasure. Another thing if the purchase had a value much higher than the cost of 4 disks.

So all the same, how to remove the magnet from the clothes, if the buyer chooses the option of using magnets from hard drives for this? First you need to remove the magnet from the disk. This is easily done by driving a thin knife blade between the plate and the magnet and pressing the magnet with effort.

However, it should be noted that the magnet must be applied to the very tip of the beeper, to its extreme protruding point. The magnet demagnetizes the clip, and the mechanism itself opens.

You can not bother with the purchase of old hard drives, and immediately go to the economic or radio shop and buy there a strong magnet. Although there are several ways to do it at home. It is enough to take a small magnet and a piece of iron, having spent several times iron on the magnet, you can "magnetize" it. Of course, with time, from impact or strong heating, iron will lose the properties of the magnet. But after all, we need it for a little while.

There is still a way to make a home magnet. True, this requires an inductor of fairly large dimensions, and there is a danger of short circuit.