Means of blockages in the pipes: "Pothan", "Mole", "Tiret Turbo" - which is better?

Each of us at least once in my life, but faced with such a problem as clogging in the pipe. The case is rather unpleasant and requires urgent action, unless, of course, you are fond of dirty dishes or lack of opportunity to take a shower. A huge amount of advertising on TV broadcasts about the effectiveness of a variety of tools for almost instantaneous elimination of blockages. Let's see if they are really good and what else can be eliminated.

How to determine if there is clogging?

The first and most important sign of clogging is the decrease in the rate of outflow of water from the bathroom / washbasin / toilet bowl, etc. If the plunger does not help, then the air bubble is not stuck in the pipe, but fat, food remnants, hair, etc. It requires urgent intervention , Because when you turn on the water you can arrange a real flood.

If, as such, there is no reduction in the rate of discharge of water, but there is an unpleasant smell from the sink, this is also a sign of clogging, but not yet strong. It is worth taking measures immediately, so as not to aggravate the situation by using folk remedies or chemical gels designed to prevent blockages.

A sign of clogging is the appearance of water in the underlying drains, for example a bath, when water is turned on in the sink. The same effect can occur when the water is drained by a washing machine. In this situation, too, the remedy for blockages in the pipes can help. But which one to choose? Let's figure it out.

What is the basis for any remedy for blockages in the pipes?

What substances help to remove clogging? The main component that is included in any means for sewer pipes, as well as in folk recipes, is acid or alkali. Alkali readily dissolves fatty soils, and acid - soap, hair, threads, etc. Based on the properties it becomes clear that alkaline is usually used for the kitchen, and the acid ones are used for the bathroom.

The remedy for blockages in pipes is sold in different forms:

• Gel (it is more economical, since a small amount is evenly distributed over the surface of the pipe and eliminates pollution, without requiring the use of even half the capacity of the gel);
• Powder (it needs to be filled in the drain hole and filled with the necessary amount of water, it is important not to overexpose, and also to rinse the powder thoroughly with water, otherwise it can begin to erode the surface of the bath / shell and the tube, since it is more concentrated than the other 2 species);
• Liquid (it is poured into a pipe in large quantities, diluted or not diluted with water, it is also important to rinse thoroughly to avoid problems).

Thanks to the advertising and the experience of generations, we can easily name the most famous names: "Tiret Turbo", "Mole" and "Pothan".

"Mole"

The liquid "Mole" is one of the oldest in terms of age of existence. It removes blockages well, but few know that it is suitable only for metal pipes, and plastic can spoil because of the alkaline environment. Another disadvantage of the "Mole" is that it has a chemical unpleasant odor, so after the bay in the tube means better leave the room, and to eliminate the clog - to ventilate.

"Tiret Turbo"

It is a tool that can be found in any store. It is very well advertised, and not for nothing. On the effectiveness of "Tiret" is not inferior to any means of blockages, and even surpasses them, because it is suitable for all types of pipes and has no pronounced odor. "Tiret" in consistence is a gel and is divided into several categories: to prevent blockages, to eliminate blockages, to eliminate complex obstructions. The package noted that it operates for 5 minutes. In fact, the time of action may differ depending on the complexity of the blockage in the tube, because the larger the layer of accumulated debris, the longer the gel will have to dissolve it.

When polling consumers on the question of which tool they are most often used for cleaning water pipes, most respond: "Tiret." Reviews about it on the Internet and other sources are mostly positive. It removes blockage efficiently and quickly, disinfects, eliminates unpleasant smells, prevents the appearance of mold.

"Pothan"

"Pothan" is a tool for pipe cleaning, the price of which exceeds the prices for all other funds (we will discuss this below). It is made in the form of powder, has an antibacterial effect and quickly dissolves fat and other types of blockages, so it is recognized as the best remedy against them. Use "Pothan" can for both metal pipes, and for plastic. Its biggest drawback is a strong pungent odor. Therefore, it can be used only in accordance with the instructions, and also use protective equipment (mask and gloves).

There are others

If you go to the store, you will be surprised by the variety of means for cleaning pipes. In addition to the above, Domestos, Mister Musul, Sanford and others are very popular. They are often similar in composition or form of release to those examined, and someone prefers them. But the best means of blockage in pipes is for everyone to choose for themselves.

Price list

The prices for the agent against blockages vary greatly. So, "Tiret Turbo", depending on the type of gel and the mark-up of the store can cost from 200 to 400 rubles. "Mole" is cheaper - about 100 rubles. For 1 liter of money. "Pothan", a tool for cleaning pipes, the price of which is quite high, will cost about 500 rubles. For 600 g of powder, but it is found on the shelves less often than the same "Tiret". The remaining funds have roughly the same prices, but their cost rarely exceeds 500 rubles.

Security measures

The remedy for blockages in the pipes is very toxic, whatever it is, so you need to take precautions so as not to damage your health and drainpipes. First, you need to use gloves and a mask. Gloves can be the most common, rubber, sold in any store. A mask can be made of cloth independently, the main thing is that it protects from harmful fumes and odors. In case of skin contact, always wash with soap and water, if irritation occurs, you can drink antihistamines, but you should visit a dermatologist to avoid possible chemical burns. In case of contact with eyes, rinse with water and consult a doctor.

It is equally important to follow the rules of using this or that remedy. So, it is better not to fill the metal pipe with plastic ones, as it can damage them and have to change pipes, rather than clearing of blockages.

How else to eliminate clogging

If you do not have the opportunity to quickly go to the store or you are not a supporter of chemical agents, and maybe for other reasons you do not want to resort to the help of Mole, Tiret or another means, try to mechanically clean the pipes or use popular recipes.

At first glance, the easiest way is to use a plunger. It is a cup-shaped rubber nozzle on a wooden or plastic handle and serves to drain air from the pipeline, which pushes pollution through the pipe and eliminates it. But the plunger is not always able to get rid of dirt, as strong air clogs can not push through the air.

If you call the plumbing, it will not fill the pipes with special tools, but will either blow the pipe, or disassemble it and clean it with a hose or hook, pulling out the dirt. Purge is carried out by special equipment, similar to a vacuum cleaner. If you dismantle the pipe and clean it yourself, you can (if you are sure, of course, that you will then correctly assemble it), then you can not blow it yourself by any means, as it is possible to damage pipes not only in the apartment, but also in the house. It is better to pay for plumbing than to pay for repairs.

Folk recipes

There are several folk remedies that are not as strong as Potkhan or Tiret, for example, but they can also help if pipes get clogged:

1. If the cause of blockage is frozen fat, then it must be melted with hot water. To do this, just open the hot water and give it a leak for 5-10 minutes, the main thing is to see that it flows, and not a flood. It is not necessary to fill the pipes with boiling water, as it can damage them.
2. For metal pipes, you can try to apply a solution of caustic soda (1 tablespoon per 1 liter of hot water). The mixture is poured for several hours, and then washed off with hot water. Important: when working with soda, wear gloves and make sure that it does not get on the enameled surfaces, as it can eat them.
3. In the fight against blockages, you can use ordinary soda paired with vinegar. Everyone knows that with the interaction of soda with vinegar a large amount of foam is released, which means that a chemical reaction occurs. In the sink we fall asleep a glass of soda, pour a glass of vinegar on top and let stand for 30-60 minutes. After that, rinse with hot water. It is important to ensure that the foam does not get out of the drain, otherwise it can damage the surface of the enamel bath or sink.

People's methods should be used only in case of weak clogging or for prophylaxis. Strong pollution of ordinary soda to withdraw very difficult, and in some cases, you can only make it worse.

So, it is difficult to say unambiguously which of the means is better. It all depends on the type of pipes, the type of clogging, and also on how much you are willing to pay for it.