Protective glass on the phone: how to glue and what is the difference from the film

"Protective glass on the phone: how to glue it?" - a lot of users are interested in this question. First, immediately note that the process of installing a protective glass for a smartphone has some subtleties, but in general it does not appear to be anything more than super complicated. Even if you have never done this before, you can achieve the same result as you get in the service centers or in the salons of cellular communication, the only difference being that the installation of protective glass in the above-mentioned companies is a paid service. All that is required from the user is a set of tools and a little attention.

Protective glass for phone: how to glue

Many users who are faced with the need for such an operation, do not even suspect that an important role here is played not only by the correct sequence of actions, but also by a well-prepared workplace. If there is a mess on the table, and materials and tools are scattered, achieving a good result will be more difficult. The more quickly you can use this or that element, the better will be the gluing. Therefore, in advance, make sure that all unnecessary components have been removed from the workplace or at least moved away from the operation. So, here's a protective glass in front of us on the phone. How to paste, we'll talk just below, but for now let's talk about what it is and how it differs from the film.

Differences between glass and film

Usually, users clearly understand which of these materials are involved. Nevertheless, some people do not understand the elementary differences between the film and the protective glass. Let's talk about this in more detail. The second material is better able to withstand mechanical loads. If you drop a phone protected by such material, only the glass will suffer. It can then be replaced. But if the apparatus was glued to ordinary film, then everything is much more serious. It may be necessary to completely replace the screen. And it will cost an order of magnitude more. For the sake of justice, we note that the glass is not afraid of sharp objects. You can drive it with keys, a knife, scissors - anything. But it will not get any damage. This, unfortunately, can not be said about the film. It would be desirable to note at last, that glass to paste is much easier. Well, now we turn to the question of how to install a protective glass on the phone, in more detail.

Preparing the screen

Before installing the protective glass on the phone, you should carefully prepare the display surface for this operation. The process will be concluded in several basic steps. If you have previously put a protective film on the screen , you need to remove it by pulling the edge. More film in the future we do not need, and it can be thrown into the garbage can. We open the complete set with a protective glass. It should have a cloth made of microfiber. We will need it later. If the kit does not include the impregnated rag, you can wet it with a wet disc, after which you should wipe the screen. You can wait until the display dries, then use the microfibre cloth as directed. Before starting such work, it is recommended to wash your hands with soap to avoid the appearance of greasy spots on the screen. When the screen is cleared, you can proceed to the next step. So, we continue to answer the question of users about how to use a protective glass on the phone, how to glue it.

Installation

When you pick up a protective glass for your phone, you will see that it is covered on one side by a special layer of film. This is the adhesive side, which the element will need to be applied to the screen of the device. Now we remove the film, preparing the glass for the gluing process. Keep it at the same time not for the surface, but for the edges, in order to avoid the loss of properties. When you align the glass, press it to the screen itself. Covering the first is done in such a way that nothing extra is needed to do, it glues itself.

Finish the operation and remove the air

After you install the protective glass on the phone, you will notice that there are small bubbles under it. It's the air that's left inside. It can be removed quite simply. To do this, smooth the glass from the center in the direction of the bubbles. Thus, they can be "squeezed" abroad. In the end, you get an ideal element that sat on the screen surface. Some users ask a question about how much a protective glass is on the phone. Note that the price of it falls in the range from 300 to 1,000 rubles, depending on the brand and quality, as well as on the phone model. Now, after reading this article, you know the answer to the question of how to apply a protective glass to your phone, how to glue it correctly.

Which protective glass to choose

Currently, a considerable number of companies are engaged in the release of such accessories. Nevertheless, by right the best of them is considered to be protective glasses from Ainy. Why? What is the best protective glass on the phone? The products of this company have proven themselves in numerous tests. Especially closely the experts followed the behavior of the glasses installed on the devices of the American company Apple. It was found that, with a relatively small thickness, the accessories provide excellent screen protection against external mechanical influences. It should be noted that the glass of this company is made of five layers, the final one is oleophobic.

The release of such products is also the company Func, for example. Its products are approximately in the same price category. It was noted that many accessories are hardened, but the quality and level of protection to the elements from Ainy do not hold out, which, in principle, was confirmed by endurance tests.