How to stick a protective glass on the phone? Glass from Ainy

How to stick a protective glass on the phone? Probably, with the need to give additional protection to the display of your device, many users came across. Yes, by the way, the film can well protect the device from external mechanical and physical influences, extending the life of the screen. Currently, the protective glass on the phone (the reviews will be presented below) costs a couple of hundred rubles. Its gluing will cost about the same amount, but not everyone after all is willing to give money for the operation, which you can successfully do yourself. That's why the question of how to stick a protective glass on the phone is so urgent.

What is this element?

The protective glass on the phone's screen with its appearance resembles the most ordinary film. As a result of the application of special technologies, it becomes not only transparent, but also flexible. It changes except in this case only density, and in the big party. In ordinary cases, the thickness of the protective glass, which we are accustomed to call a film, falls into the interval starting at 0.15 and ending at 0.33 millimeters. You do not need to be an expert to confidently assert that it is not so much in fact. Nevertheless, before asking how to glue the protective glass on the phone, the user should clearly understand that certain differences between the glass and the film still exist. And now we will talk about them.

Anti-glass film: main differences

The basis here is those properties for which, in fact, the protective glass was created. Thus, firstly, this material is more resistant to scratching than a film. You can make sure of this, in principle, yourself. To do this, you can use any sharp objects - a knife, keys, scissors - all this in contact with the glass will not do him harm. Secondly, the film is more prone to "punching" in the case of a dense mechanical contact. In other words, the glass when hit will save the screen from damage, in contrast to the film. In this case, of course, it will break. But the display remains intact, and you can replace the other glass. Well, to complete the analysis of differences can be, saying that the glass to the surface of the screen is pressed many times denser and stronger. Yes, and it is glued more quickly and more conveniently. Well, now you can move on to the issue of how to paste a protective glass on the phone.

What you need to do before starting work?

Of course, first of all you should take care of bringing order to the workplace, so as not to lose tools during the operation. When everything is ready, we will open the packaging and see what can be found there. The equipment in the sets is usually this: a cloth made of microfiber, an alcoholic napkin, a protective glass. In some cases, there may be additional elements, like a horizontal plate for smoothing. To the screen does not leave a greasy stain, you should wash your hands with soap and dry them properly. Now we turn to the process of applying the constituent elements from the kit.

Preparing the screen

If your phone already has a protective film attached, remove it. We will not use it any more. After that we take the alcoholic napkin in the set. If it was not supplied in a box, you can soak in an alcoholic wadded disk, and it will replace you with this tool. After that, wipe the screen of the device and let it dry. You can speed up the process using a dry rag, or even better - a cloth made of microfiber.

The gluing process

You can notice that on the side on which the glue is applied, the glass is covered with a special layer of film. It will need to be removed before gluing to the screen. After you have removed the layer, you need to properly position the glass, and then apply it to the surface of the device.

Elimination of the airlayer

It is unlikely that someone will be able to glue the glass right away. Each user can make sure that under the new coating there will be small bubbles from the remaining air inside. What to do in this case? Manufacturers recommend coping with this problem, smoothing the glass from the center towards a separate bubble. This way you can "push" him out of the line. After that, it remains only to remove the dust. And the operation on gluing the protective glass will be completed.

Glass from the company Ainy. Reviews

To date, special protection is used by Ainy. The thickness of this glass is 0.33 millimeters. This was mentioned earlier, almost at the very beginning of the article. Numerous tests have shown that the glass from this company greatly increases the screen protection and can save it in case of unintended dense mechanical contact. In general, in all respects, Ainy's protective glass is ahead of its competitors. This is evidenced by the feedback of buyers, whose devices have been saved from damage.