Parquet board: pros and cons, types, sizes, installation features and feedback

The parquet board, the pros and cons of which should be considered before purchase, is a floor covering of 2 m in length. The thickness and width can vary depending on the company and brand. In the middle of last century, parquet board successfully replaced the piece parquet.

Initially, this decoration consisted of two layers and had design flaws. This was the reason for further development. The parquet board today has three layers at once, each being perpendicular to the previous one. This provides rigidity. The top layer is made of valuable wood, the middle layer is wooden slats made of softwood. The inner layer is made of spruce plywood.

Main advantages

Parquet board, the pros and cons of which will be discussed in the article, is used today as a floor covering quite often. This is due to the naturalness of the material, which has all the advantages of wood.

The coating is easy to lay down thanks to the locking joint, in addition, it has a high sound absorption coefficient. After stacking, you can not be afraid of the risk of deformation, this is due to design features. The surface is quite pleasant to the touch, and an additional advantage is the lack of the ability to accumulate static electricity.

The main disadvantages

Parquet board, the pros and cons of which must be taken into account before buying, is quite popular today. However, it requires careful treatment, the material must be protected from chemical and thermal effects, as well as moisture. The coating does not cope with mechanical loads. This is due to the fact that the veneer used in the production is rather thin, so there are scratches and dents on it.

Parquet board, the advantages and disadvantages of which it is useful to read before purchasing the goods, is quite difficult to restore. The surface can look monotonous, with the help of laths it is rather difficult to create an original ornament. As for the diagonal laying, it requires time and effort.

Pros and cons of a parquet board and a laminate

If you compare these materials on the ability to undergo shock loads, then the first place is the laminate. However, in this case it is a question of a material of a higher class. It is difficult to scratch the leg of the chair or hurt with a heel. Laminate is able to undergo a more impressive weight than parquet.

With regard to the ability to withstand moisture and temperature fluctuations, the parquet does not like dry air, it cracks from this, and from the humidity swells. Laminated coating perfectly tolerates both. Therefore, in the winter, when the rooms are very dry, there are crevices between the adjacent parquet boards. Laminate will not react in this way. This is his advantage.

Looking through the pros and cons of laminate and parquet board, you should pay attention also to the appearance. In this parameter, the parquet wins. When the room is designed in a classic style, then in the interior of this type and asks for a parquet board. If the apartment has a modern style, then it requires laminate. It has a lot of colors, drawings, patterns and textures, which can be selected for a specific design.

Dimensions of a parquet board

The parquet board in the kitchen is rarely laid. Pros and cons of this material answer the question of why this happens. This is due to the fact that the parquet floor does not cope well with the effect of moisture, and in the kitchen it is often necessary to carry out a wet cleaning, in addition, it sometimes happens that bottles are spilled on the floor. However, this feature is not the only thing you need to know about a parquet board.

Often consumers are also interested in the size. As for the length, it is usually 2 m. Whereas the thickness of the parquet reaches 6 mm. The minimum parameter is 0.5 mm. The most common option is a 4-mm board. With these parameters, the panel can be exposed:

• Brashing;
• Bleaching;
• Planing;
• Heat treatment.

The width is also important, it can reach 20 cm.

Varieties of a parquet board

Parquet board for the floor, the pros and cons of which were discussed above, is classified according to several varieties. This takes into account the texture, color, the presence of knots, sapwood, etc. In this regard, you can select the collection:

• Select;
• Natures;
• Rustic.

The first variant assumes the strips, the same in structure and color. There are no defects and knots in them, and the drawing is almost monophonic. The second species can have color combinations. Such a board usually has knots. Very catchy are products that belong to the rustic collection. Here you can see not only the cracks, but also the knots. For this variety, the country style is ideal.

Reviews about a parquet board

It is important to take into account its dimensions before purchasing a flooring material. Parquet board, the pros and cons of which are also often taken into account by consumers, can have a different number of strips of veneer in the upper layer. On sale you can find a parquet board:

• Single-band;
• Two-band;
• Three-band;
• Four-band.

According to consumers, the most popular is parquet with one strip, because this material is almost identical to a board from a solid array. Buyers like that this finish consists of particularly valuable breeds and has an impressive width of 137 mm. Buyers especially emphasize the grooves formed after laying, which realistically mimic the floor of the array.

Mounting Features

Parquet board, pluses and minuses, reviews about which you could read above, can be stacked in two ways: floating and glued. When installing with the latest technology, the elements are glued to the floor surface. Today this method is used quite rarely. As for floating technology, it can simplify and speed up the process. The technique in this case involves joining the boards by the sizing method. Among other things, the boards can be interconnected by a turn-angle lock. Due to the fact that in the plant conditions the parquet boards are profiled, after the laying they look like a single whole.

Before installation, the surface must be leveled with a self-leveling compound. If you decide to use the adhesive method, the base should be made of moisture resistant plywood. Before installing a parquet board on a wooden or concrete base, waterproofing of polyethylene film with an overlap of 15 to 20 cm should be covered.