Organic glass - use in everyday life

Organic glass is an excellent material for processing, it can be easily and densely glued. But, like all building materials, it has its own characteristics, knowing which, you can use it without any problems both for industrial purposes and for household purposes.

Cutting

A sheet of plexiglass is sawed by a hacksaw for metal, but the work does not come out very neat. To improve the quality of self-made large-toothed cloths. The sheet glass is marked with a steel ruler and a cutter, then it is cut exactly half. Then break off like a normal glass, and clean with a homemade jointer. Org glass is also cut with an ordinary circular saw. In this case, water must be used to cool the metal surface of the milling cutter. A special knife-cutter is also convenient when cutting this material. A conventional jigsaw will be useful for obtaining curly details. A kind of "jig saw" will be heated wire.

Polishing Plexiglas

For grinding, fine sandpaper is used. During work, the product is watered. The work is carried out using a flannel handkerchief and polishing paste. The polishing is finished with the same cloth, only clean.

Drilling

The organic glass is drilled with drills with special technical characteristics. It should also be taken into account that it can be dragged into the material and seized. The tool for drilling is both a hand drill and a vertical drilling machine.

Gluing

Substances for bonding Plexiglas are very toxic and toxic. It is necessary to work in a well-ventilated area and away from food. The organic glass is glued together with dichloroethane. He is most suitable for this work. Just a few minutes - and the gluing process is complete. But during processing, as already mentioned, you must strictly follow the safety rules.

Shaping

In this operation it is necessary to withstand the temperature of 110-135 °. When the temperature is higher, quality deteriorates, if lower - the glass breaks easily. Work with plexiglas in protective gloves to protect your hands from severe burns. Cylinders are made using a piece of pipe. To do this, using a wire ring, take the preheated workpiece and stretch it into the hole in the pipe. Then wait for the product to cool.

Coloring

Organic glass before painting should already have a glossy surface. It is best to perform such work with nitro-enamels. It is colored both the outer and the inner side. A chip can also be used. To do this, use a sharpened chisel. The process of staining lasts approximately 15 minutes, depending on what shade should be obtained. The solution is constantly mixed to make it homogeneous. Plexiglas is an excellent material for decoration and design of different rooms. Using the widest possibilities that this material gives, you can make a lot of exclusive, beautiful and reliable products.