Optimum insulation of the house to date

In our country, the climate is quite severe, so warming the house plays an important role in the construction process. When building a new structure, it is necessary to clearly imagine what kind of housing you want to get. You can talk a lot about design solutions and interesting projects, but the house in any case should be warm and dry. It is desirable that its cost was acceptable even for the average citizen. Those who made the insulation of a private house, understand that it will not be possible to do without a good thermal insulation material. By buying a quality product, you can significantly reduce the heat loss.

Carrying out the warming of the house of wood, you should pay attention to the best option. It will be the application of a system of ventilated facades, which assumes an air layer. Thanks to it throughout the year, the walls remain dry, without losing any heat-shielding properties. The absence of such a gap is fraught with the rapid spread of mold due to high humidity. Thus, it is necessary to remember that in the process of work it is necessary not only to concentrate attention on thermal insulation, but also to take care of the structure itself, protecting it from the influence of external factors.

First of all , heat losses occur through the walls of the dwelling, so their thermal insulation should be given special attention. From the inside to make insulation work is much easier, but this method is not widely used due to the reduction of living space. External insulation of the house has many advantages, expressed in protecting the structure from rainfall and other external influences. In the process of laying the material, it is necessary to take into account the conditions under which it is proposed to use this or that thermal insulation system, otherwise premature aging of the insulation may occur.

A good option is the insulation of the house with EPS boards, when the material is glued to the surface of the facade. After completion of work, the whole plane is plastered with special hydrophobic compounds and painted. A high degree of waterproofing and good thermal characteristics helps to ensure the spraying of polyurethane on the outer surface. Outside, a film is formed, which protects the material from moisture. However, most often used plates from mineral wool, located between the bars. They are closed with waterproofing and decorative finishing in the form of ventilated facades.

If there is no possibility to hire a construction team, the insulation of the house from outside can be made by own strength. For example, with a siding facing the thermal insulation material is laid between the bars, to which the final crate will be fixed. At the first stage, the location of the horizontal bars is selected, the interval between which is determined by the width of the insulation. The cross-section of the bars is selected depending on the thickness of the plates of mineral wool. Thermal insulation is installed in the lath so installed, which is immediately closed by a layer of waterproofing material.