Non-inertial coil: features of choice

Almost every fisherman has a tackle in his collection on which a inertia reel is installed. This device is obliged to meet all the requirements, because otherwise you can not see a successful fishing. Such adaptations are worth a lot, so they are often purchased in a single copy and are used for several years. Thus, you must carefully consider the choice of coil.

Non-inertial devices must have the following characteristics. The quality of the device depends on the gear ratio and power. The smaller the first parameter, the greater the power of the inertial-free coil. The gear ratio represents the ratio of the windrower turns to the number of revolutions of the handle.

This coefficient differs from device to device. Therefore, when determining the power of the coil, it is necessary to look at the gear ratio, which, for example, can be designated 4: 1. This indicates that for one turn of the knob the woodcutter will perform five rotations.

The operating characteristics of the coil are influenced by the diameter and length of the spool, as well as the number of bearings. It turns out that the bigger the diameter and length of the spool, the farther you can perform casting the bait. Also, the inertial-free coil is considered to be of higher quality if there are more bearings in its design.

The reason lies in the fact that in this case the load falls more evenly on the rotating assemblies of the device. However, it is necessary to be careful, because there are not high-level coils, having a lot of bearings made of poor-quality material. It is better to pay attention to well-known firms.

The performance of the device is affected by the friction brake, which ensures the rotation of the spool with the force exerted on the line. With this function, it is possible to prevent the line breaking when the fish resistance. A qualitative frictional brake produces a lowering line without jerks, smoothly. Adjusting the coil mechanisms makes it possible to strengthen or loosen the clamp of the bobbin, which will allow the use of a different length of timber on one device.

When choosing a coil, you need to see where the friction brake is located. It can be both from behind, and from the front. In this case, the choice depends only on the personal preference of the fisherman. Most people purchase inertia-free coils with a rear clutch, despite the fact that devices with a front brake are considered more reliable.

The instant stopper, designed for the return stroke, will come in handy when bottom fishing gear is used for fishing . With this coil element, you can fine-tune the nod. It should be noted that the smaller the play, the better the device.

A reliable inertia-free coil has in its design a conical roller of a forest depositor, which, as a rule, has a hard coating on the bearing. This element helps to prevent twisting of the line.