No image on the monitor: causes and solutions

If your image suddenly disappeared image, do not rush to despair and go to the service center or, moreover, buy a new one. In this article, I will offer you some tips on how to fix this type of problem yourself, and I'll also talk about the reasons why it does not have an image.

So, let's start: there is no picture on the monitor, what should I do?

1. Check the power of the equipment. To do this, you need to see if the monitor cable is connected securely to the power source (socket), if the correct connection is made on almost every model of any monitor, the indicator light should be on or flashing.
2. Check that the cable is properly connected to the system unit. It will not be superfluous to remove the cable from the connector for 10-15 seconds and insert it back. Naturally, this action should be performed in the absence of power to the computer.
3. In the event that there is no image on the monitor, and when you turn on the sound from the system unit (usually similar to a squeak), the video card most likely jumped out of the connector. In this case, it is necessary to turn off the PC, remove the cover of the system unit, remove the video card and insert it into place again. Turn on the computer. If the video card fails, color bars may appear on the monitor screen . It breaks down due to active cooling and insufficient ventilation. In the case when there is no image on the monitor after overclocking, return the factory settings, and after turning on, monitor the temperature of the system unit.
   
   
   If visual signs indicate that the video card is burned, it is necessary to replace the part with a similar one.
4. If only the fan operation is audible when the PC is turned on, and the system boot does not give a distinct start-up sound, the motherboard or PCI-connector is damaged. Here you can try to rearrange the motherboard in another slot.
5. Very rarely, but still the problem can be covered in RAM.

It is possible to find out exactly which part caused the absence of an image on the monitor, it is possible to alternately replace or rearrange it on another computer.

This is almost all the causes inside the system unit, for which there is no image on the monitor.

Also, problems can be in the following:

• If the image disappears during the system boot time, the reason is in the resolution. The output is simple: load the system in safe mode and change the resolution to a lower one.
• Sometimes a situation similar to the previous one occurs due to the failure of the video card.
• When setting a higher resolution, the image disappears. The solution is similar to item 5.

The following reasons and their solutions:

• There is no image on the monitor, if it is not suitable for a long time, although the PC is working. In this case, the default screen saver worked. In the settings of the desktop settings, you can turn it off at all or change the operating time.
• If the monitor stops giving signs of life after the keeper has acted, the reason lies in the energy-saving system. This process is often called "Sleepy Mode" or "Standby Mode".
• When the PC is operating from an uninterruptible power supply, there is no image on the monitor. Most often this means that it is simply not connected to the UPS unit. If this is not the case, then try reconnecting the monitor to both the uninterruptible device and the system unit.

I hope you will be able to independently determine and eliminate the reason for which there is no image on the monitor.