Jig-head. How to pick up, tie a jig-head? How to make a jig head with your own hands?

Those who catch on spinning, well imagine what jig-fishing is. It is with it for many fishermen that the development of such a popular tackle begins. It allows you to quickly understand the subtleties of fishing. At the same time, whatever the conditions were on the pond, no matter how high-grade spinning was and no matter how large the population of future production, this kind of fishing can not do without what is called a "jig head", which often more determines the result , Than the bait.

Classifications

Jig-head - this is the name of the sinker, which has a certain shape, with a crochet attached to it. It is very effectively used when fishing with baits intended for spinning of various lengths. The jig-head is classified quite simply and very clearly. First, by weight: in most cases, the weight of this sinker is indicated directly on it in gram equivalent. However, experienced anglers easily rank its weight, despite the wipes or scratches from the pike or pike teeth, determining what kind of jig-head in front of them, the "eye".

By its way of fixing this sinker is stationary and articulated, which is also called softly "ears" or "Cheburashka". Despite the fact that the mass of both the first and the second can be the same, the difference between them is quite noticeable.

Stationary variety

The stationary jig-head assumes a rigid connection of the sinker with the hook. It was the very first, so for a long time was considered a classic. But even now, when the hinges appeared, the stationary jig-head still did not disappear from the boxes of fishermen. And that's why.

Due to its rigid connection, the hook, which is threaded into the silicone bait, is almost always placed with the point up. It is this position that is considered the most successful for effective cutting. In addition, during the posting, there is never a so-called "sticking" of the hook attached to the load ring. And still: on stationary installation the game turns out as much as possible measured and smooth, without any failures, as the predatory fish is required.

However, catching a jig-head of this kind has its drawbacks. Firstly, because of the significant frontal resistance - the result of a rigid connection - the casting distance is noticeably reduced. In addition, for the same reason, this installation is lowered to the bottom for a longer time, although it often becomes a plus. Thirdly, the angler does not have the ability to vary the size of the bait, putting only the one that fits the hook of the sinker. Finally, in some cases, when mining, mining is released, and the same rigid connection is used as a lever.

Hinge varieties

The swivel heads assume a significantly greater freedom for bait due to the ring-to-ring connection type. In this case, the sinker can move in a straight line, and the bait can have a rotational action with a slightly curved trajectory. Technically, this is simple: the jig has two tabs, on the one hand it's a hook fastener, on the other hand it's a clasp or a straight line. Advantages of eared jigs are the following: longer casting, the ability to arrange any bait, hook, and maximum freedom of action for silicone during wiring.

Jig-head forms

This parameter directly depends on the game of bait, not only during wiring, but also in free immersion. Experienced spinning experts know that the more the flow around the head, the less resistance to water the bait experiences and, of course, vice versa. This characteristic also determines the position of the hook in the predator.
The existing variety of head shapes somewhat confuses inexperienced fishermen. It is difficult for them to understand all this choice of forms, so many of them use a sinker just a simple ball shape. Indeed, it can be designated universal, because it is more than all the others, it is capable of "adjusting" to the conditions of catching. But the more accurately the fisherman learns how to choose the shape of a sinker for a certain pond, and also the better it is to know how to dress a jig-head, the more effective will be its "quiet hunt". In addition, it will greatly reduce the number of hooks and will save the tackle from the cliffs.

Suspension Points

Another important condition is the accuracy of the point of suspension of the head - the location of the ring for fastening to the line. From the proximity to the center of gravity of the sinker of this node depends the position of the bait during wiring. Jig-head on its suspension point is classified into three groups: with front, standard and central suspension. Each of them is designed for certain conditions of fishing and is good at its "depth", at a different distance from the bottom. Picking a jig-head that has a certain point of suspension, you can adjust the angle of the lure relative to the bottom relief, which is important to ensure that fishing was successful, and production - rich.

Selection of a jig-head for fishing conditions

Even a beginner knows that an incorrectly chosen mass of sinker can lead to almost zero all efforts. But if you know how to pick up a jig-head, based on the expected conditions, then the extraction will not take long. Of course, it's impossible to determine exactly the weight before the start of fishing, just need to correctly limit the range that you might need.

Choice of jig-heads for fishing on the river

In this case, in addition to rigging, depth and the required casting distance, as well as the type of bait used, the force of the current must also be taken into account. The main task of the jig-head is to provide the necessary wiring horizon for bait. It is believed that for a standard step, the fall time should be two or three seconds. In most cases this is the optimal weight for a jig. Of course, it is selected experimentally, but for many medium-sized rivers with a depth of two to five meters the required mass is a range of eight to sixteen degrees.

The choice of jig-heads for fishing in the pond

In these conditions, it is much easier to determine the weight of a sinker for a jig-catch. In the pond there is no current, in addition, sharp changes in the depths in it are rare. And this means that the optimal size of the jig-head will depend basically only on the depth and range of casting in the case of catching from the shore. And such data the fisher can learn and in advance. The main requirement for the jig head is the same: the need for pauses with stepped wiring at least every two seconds.

For catching in the reservoir

At reservoirs, too, there is a specificity associated with the fact that in large areas fishing is almost always carried out from the boat. It is known that jig fishing on boats presupposes mainly the search for bottom anomalies, such as sharp drops of depths, pits, braids, riverbed boundaries, etc. It is in such places that a predator is most often found. Therefore, the mass of the jig-head should be such a parameter that it is possible to fully exploit both the lower part and the upper one.

How to tie a jig-head?

Anglers are asked a variety of questions. And one of the main - about how to push the jig-head. Today on sale there is a huge amount of plastic soft baits and a very small selection of the corresponding jig heads. There are only two types of weights: with lead "spouts" on the fore-end hooks and those that do not have such a beard. The latter have only a small "holder" for bait, which is a wire spring, which, when screwed in, fixes the bait.

But many, not knowing how to plant a jig-head, tear silicone. But in fact, everything is very simple: the bait in its finished form should not have a tightening between the load and the sting. To do this, you must first determine the place from which the hook should exit. Attaching a jig-head to a bait, a puncture is made with a needle or an awl. Then the bait is pierced with a sting from the head, threaded on the forearm and displayed in the intended location.

The first thing you need to know about how to wear a jig-head is the length of the hook. To do this, you need to apply the sinker to the bait, and in such a way that it fits snugly to the top of the vibrotail or twister. The hook itself should go out where the "tummy" of the first or the tail of the latter ends. A hook is inserted into the body of the jig-lure smoothly, with a careful fitting of the silicone. At the same time, it can be located at a small angle. When a silicone nozzle is worn, it is necessary to try to pierce to the end, so that the notch is inserted inside the twister or vibrotail. This is done to reduce the likelihood of pulling the bait.

On the quality of heads for jig fishing

The quality of hooks, which equipped with jig heads, in some cases is, to put it mildly, not the highest. Often cheap models are equipped with substandard components. The main property of a good hook is the ease with which it pierces the tissue in the fish mouth. Also important are the indices, how deep it penetrates them and how reliably it can hold prey during the voyage.

We make a jig-head ourselves

Jig-head with their own hands is done quite simply. If the choice is stopped with lead, then the metal is simply poured into the mold for the ebb. Volumetric jig heads are obtained from two halves. The alloy is then poured through special openings, and special blowouts are made to remove air from the blanks. The shape for the sinker can be made from aluminum or steel, as well as from heat-resistant silicone, gypsum and other polymers.

To do this, you need a ready-made jig-head, a copy of which you need to do. First, a cardboard box is taken, the gypsum solution is mixed and half filled. Thus it is necessary to watch, that the substance lay down densely and without air. Then the solution begins to thicken. When it becomes harsh, the finished product is pressed into it, lubricated with oil. After this, drill holes are made using the drill. When the mold is completely dry, it can be used.