Installation of the home pylon in the home

Half-dancing requires a certain skill and good physical preparation. Performed na are comparable in complexity with good acrobatic stunts. Therefore, the equipment for this type of dance should be reliable and firmly fixed. It's one thing when half-dancing takes place in special studios, the other when it's decided to study at home. Consider how to install the pylon with your own hands.

What it is?

The second name for the equipment for a half-dance is a pole. It is a smooth metal pipe with a set of fasteners, on the surface of which there are no burrs and scales. Otherwise during the dance you can get significant injuries. Fasteners must be reliable, but at the same time with minimal dimensions. This is due to the convenience of movement around the pole.

With massive fastening pancakes, slipping of heels can occur. As a result, a girl can fall, get hurt. An important safety factor is the correct installation of the pylon in the apartment. If the equipment is not tightly secured, then it is seriously injured when falling from a height. And it can reach more than 2000 mm.

What material are the poles made from?

When choosing a device, much attention is given to the surfaces of the pylon. It should be moderately slippery, but at the same time ensure a good grip with the hands, the body of the dancer. There are several types of material used in the production of this equipment:

1. Chromium. Has a glossy smooth surface (almost mirror-like). The sliding effect due to this is achieved maximum. But the clutch is not of high quality. The cost is low. Installation of a pylon from such a material is not recommended in premises with a high level of humidity. Rust may appear, which will affect the quality of the surface.
2. Stainless steel. Such pipes are distinguished by a matte smooth surface. Compared with the previous version, the dancer's grip on the equipment is better. At the cost can be attributed to the middle segment. Installation of a pylon made of stainless material can be carried out in rooms with high humidity. For example, in a bath.
3. Titanium. It does not have chromium mirroring, so it provides better grip. The cost is higher. Color - golden.
4. Copper. An excellent coating that ensures both glide and grip of the dancer with the pylon surface at a high level due to the softness of the coating. It has a beautiful golden color. The cost of such a device is quite high.
5. Enamel. In the market you can find pylons and with such a coating. The color range is the most diverse, which allows you to choose a device for any design. Slip and grip are decent.

As you can see, there is a really big assortment of equipment on the market that allows you to select the right model for individual request and interior.

Characteristics

Like any other equipment, the pylon has certain parameters. They allow the dancer to feel comfortable at the moment of the dance:

• Thickness of metal. With a standard length of 2 to 3 meters, the recommended parameter is 3 mm. With higher devices, additional internal amplifiers are required.
• Diameter. This parameter lies in the range from 38 to 55 mm. The equipment with a pipe diameter of 42 to 45 mm is considered to be universal. The smaller parameter is used by fragile dancers, the larger one is used in male half-dance.
• Mounting. It should be with smooth shapes without protruding sharp corners and small size. In this case, the installation of the pylon should ensure reliable fixation. This will reduce the risk of injury, ensure comfortable movement around the pole during the dance.

These are the main characteristics that should be considered when selecting a pylon.

Kinds

There are several basic options for the design of equipment:

1. Static pylon. Such a pole does not have a turning point. You can say that it is used for beginners.
2. Dynamic. Has a twisting moment. It is used in professional half-dance. Requires a certain level of skill.
3. Universal. Can be used both as a static and as a dynamic one. Change the position allows the lock on the bottom attachment of equipment.

It is best to purchase a universal model. For the initial stage it is recommended to use it as a static device. And with the improvement of skill to rebuild the dynamic look.

Requirements for premises

There are several basic recommendations for housing in which equipment will be installed:

• Strong floor covering. The equipment must be firmly fixed.
• Strong ceiling. Preferably concrete slabs overlap.
• Area. The place where the pylon is installed should allow you to perform spinning dances. Otherwise, injuries are ensured.

Apparently, not many requirements, but it is important to observe them.

Installation Methods

Several types of installation can be distinguished:

1. Stationary. It is firmly fixed without the possibility of simple dismantling. As a rule, the installation is carried out at the stage of construction or finishing works.
2. Semi-detachable. Such structures can be removed for a while. At the same time, the elements of fastening will remain on the ceiling.
3. Quick-detachable. The pylon is fixed by the spacer principle. Can be installed in a rented apartment.
4. With the podium. Such models do not require additional fixation, since they are built into a stable platform. These pylons are cumbersome. Most often used for large areas or for traveling to nature.

Let's consider the features of setting each type separately.

Stationary

Such equipment requires rigid fixation to both the ceiling and the floor. It requires the attachment of the upper part. Can be carried out either by anchors or bolts. Marked and drilled holes. The upper flange is fixed, then the equipment is assembled. A second flange is put on the lower end of the pipe. The resulting design is inserted into the upper fasteners.

With the help of the building level, a clear vertical position is set, holes on the floor are marked to fix the lower flange. The construction is removed. Then holes are drilled. The design is reassembled, installed in place, fixed to the floor. This installation of the house pylon with its own hands has one drawback: if you still need to remove the structure, then on the floor will remain unsightly holes.

Semi-detachable

To install such structures, you need to drill holes only on the ceiling. In this case, a clear vertical is observed. This is controlled by the building level. If this condition is not observed, during intensive use, the equipment can come out of the upper anchorage and collapse with the dancer. How to properly install a pylon at home? The instruction attached to such equipment, step by step, describes the whole process. And it is best to get acquainted with it before the installation.

Removable version and a pylon on the podium

Mobile models are good in that they do not provide for a thorough installation, but technical requirements to the grounds must be observed. Removable models are mounted in the spacer strictly vertically, otherwise the dancer will spin not around the pole, but along with it on the room. The rest of the installation is quite simple and is done on the principle of spacers. As for the models on the podium, their installation does not provide for complex assembly works. Assembly is carried out according to the instruction, which is necessarily included in the set of equipment.

Features of ceilings

The classic painted concrete ceiling will not cause any complexity of installation. And how is the installation of a pylon on other types of top finishes? Stretch ceiling, for example, requires several recommendations. This problem is solved quite simply if there is a concrete slab behind such a coating. In the stretch ceiling, cut a hole, which allows you to install a pylon.

Then the flange is fixed and a decorative panel is installed to close the slot in the canvas. You can buy it in specialized stores. Then the rest of the installation is carried out. The same method is applicable for gypsum plasterboard ceilings. The attachment of the pylon to the curtain wall construction is by no means permitted. It will not provide a reliable fixation. How is the different installation of the pylon at home? The instruction, the photos presented in our article, describe this process in sufficient detail.

Reviews

Due to numerous feedback from users, the main errors in the installation - non-compliance with the vertical and unreliable attachment to the ceiling. Most often, half-dancing girls are engaged, so in this case, the recommendation is one: for installation works it is better to turn to a professional. According to the responses, there is another important point. If the installation of the pylon is carried out using bolts, rather than anchors, then periodically tighten them. Otherwise, the pole will begin to rattle at the moment of the dance, and in the future a strong weakening of the fasteners may cause it to fall.

The rest is simple installation of a pylon at home. Comments characterize the choice of such a tool for training as a good solution. Especially this applies to semi-detachable and removable structures. The second is also interesting because they can be transported. For example, from the house to the country. Especially the users are pleased with the abundance of the assortment. On sale appeared and glow in the dark device.

A healthy lifestyle is gaining in popularity. A half-dance requires a thorough physical preparation to master the pylon. Installing a house of such equipment allows you to save time visiting dance studios. This is especially important for large cities, where sometimes long trips from one end of the city to another are required. Thus, installing a pylon at home on its own will save a significant amount of money in attending courses. But it is worth remembering that the fasteners should be as reliable as possible.