HomelinessTools and equipment

How to wind a fishing line on a trimmer: the features of the process

Trimmer is one of the main tools for lawn care in the garden. Therefore, it must always be serviceable. Sometimes you have to change certain elements of the device. For example, it is useful for gardeners to know how to wind a fishing line on a trimmer.

So, in order to replace the main cutting element, you must first select it correctly. In principle, the instructions to the machine should indicate the diameter of the line, which should be used in it. The smallest value is 1.6 mm, and the largest is 3.2 mm. The most optimal option will be a fishing line 2 mm thick. In this case, you should pay attention to the power of the device.

If you have purchased the necessary cutting element, try to install it correctly. Before winding the fishing line on the trimmer, consider its cross section (square, round, with pointed edges). Also remember that it is possible to apply a fishing line only for mowing grass.

So, in order to make a change of thread, you need to disassemble the trimmer. Nothing is complicated in this. You just need to unscrew some fasteners and remove the cover, under which is the coil. It's something we need to remove. Winding the line on the trimmer spool is very simple. To do this, you need about 5 meters of material, and it will need to note the middle.

Now inside the coil you will find a bobbin with a slot, into which you need to insert a fishing line. After this, we begin to wind it in the direction indicated by the arrow on the body. Then the bobbin is inserted back, and the ends of the thread are threaded into the holes on the sides of the coil.

Before winding the line on the trimmer, note that the coil can consist of two parts. In this case, one part of the thread is wound to one side, and the other to the other. After this, you must install the coil back and fasten the cover. It should be noted that it can have a left-hand thread. This is done so that the lid can not unscrew and jumped off the device during operation.

Before winding the line on the trimmer, you should determine the system of its feeding: automatic, semi-automatic or manual. The second option is optimal. Naturally, all work should be done very carefully and carefully, so as not to injure your fingers. In addition, before replacing the line in the trimmer, it is necessary to clean the device of grass, dust, dirt and other debris.

In principle, there is nothing complicated in this procedure. However, in the instructions to the device, it almost never signs, so most users have to guess by themselves how to make a replacement. The main thing is to follow the winding direction indicated by the arrows on the bobbin and the coil. Naturally, you should not make a big effort to twist the device so as not to break it. However, the fastenings must be strong so that the lid or coil does not fall off during operation. If you are not sure of your abilities, use the services of a knowledgeable person.

Similar articles





Trending Now






Copyright © 2018 en.atomiyme.com. Theme powered by WordPress.