How to make hinges for the gate?

Starting to make the gate with your own hands, you should immediately think about the implementation of the opening mechanism. There are a lot of design solutions that not only fundamentally differ from each other, but also create completely new models of doors. In most cases, drawings of garage doors of domestic production involve the presence of hinges, which means that the finished product has a swinging opening mechanism. In the US and some European countries, a sliding or twisting opening mechanism is used, and there are also lifting gates that were used in ancient times.

Although there are a great many different closing mechanisms, nevertheless, it is the hinges for the gates that are considered the most reliable and high-quality option. They not only work without fail, but are also easy to manufacture and inexpensive. This gives them a great advantage when choosing the door opening method.

When making the gate with their own hands, most people prefer to purchase the opening mechanism in the store. However, such a purchase may not always correspond to the necessary characteristics, since the size and weight of the gate can be different, and most of the shop products are of the same type.

Considering the photo of the gate with different loops, you can immediately see what the implementation of protection from cutting is. To do this, the hinges are equipped with metal corners, additional segments are welded onto the box, which prevent any action with the elements, but the most reliable protection is hiding the hinges in the door frame. At the same time, it's enough to change the design a little - and you will not need any additional elements.

Make hinges for the gate should be based on the weight that they have to withstand. In this case, the more powerful they are, the more reliable their connection. However, do not make them too cumbersome, as this will lead to over-consumption of metal, complexity of work and unaesthetic appearance.

Make hinges for the gate with a lathe. For this, a special connection is made from a metal rod, like "dad / mom". And the turned flange should not reach the end of the hole in the second half of the loop. This is necessary to create a cavity for the lubricating fluid. It is also worthwhile to drill a hole that will allow access to this peculiar tank (for periodic replenishment with grease).

In addition, it is worth connecting the hinges for the gate with a special gasket. It is made of soft metals, and the purpose of such a product is to prevent the grinding of the loop itself. In this case, this gasket will create a difference in size between the parts of the loop, and when it is produced, more lubricant will be released. This principle of action allows you to serve the entire device long enough, and with timely replenishment of oil and periodic replacement of the gasket, they will work almost forever. This is another argument in favor of using loops, and not another mechanism.