Aerography on helmets with your own hands: the sequence of execution

Recently, this kind of creativity, such as airbrushing, is very popular. It's fashionable and very beautiful. Aerography on helmets is more and more common. And it can be seen and motorcyclists, and cyclists, and hockey players. It should be noted that the airbrushing must be done extremely accurately, not hurrying. In addition, it is necessary to acquire necessary tools and materials in advance, and it is very important that all this be of high quality. Let's take a close look at what is needed for airbrushing.

Airbrush

This is the most important tool that you need. Currently, in stores you can find a lot of such devices of different brands. There are also qualitative, and not very. There are quite primitive airbrushes for 20 conventional units. And you can see the tools worth several hundred dollars. To airbrush on helmets turned out flawless, do not try to save on this device.

Types of airbrushes

There are two main types of these devices: with a dependent, as well as an independent method of dispensing colorant. What is the first? In this case, the substance under pressure of oxygen passes from the tank directly into the nozzle, and then it is sprayed in the air.

What can be compared with this process?

This process is similar to whitewashing with a vacuum cleaner using a special nozzle: the amount of paint depends on the air pressure. Hurry to buy this device. Aerography on the goalkeeper's helmet, for example, looks great. If you play hockey, then you will have it very handy.

Compressor

This device is designed to provide an airbrush with air. The most common are piston, as well as membrane devices. The most budgetary compressors are sold for about $ 100, but with the help of them it is impossible to perform truly high-quality work. Therefore, it is recommended to buy special devices for the airbrush. The cost of foreign compressors ranges from $ 300 to $ 500, while Russian ones are slightly cheaper. If you are limited in means, you can buy a used device. Be that as it may, a qualitative drawing requires a pressure of 200-500 g / cm ² . This is an important point. Remember: airbrushing on hockey helmets must be done qualitatively and diligently.

Preparation of helmet, primer

If you want the paint to hold securely on the helmet, it should be properly prepared for later work. It is necessary to make sanding, then degreasing, and at the last stage - priming. As for the latter, there are many good varieties of it. For example, good results can be achieved with GF - Russian glyptal primer containing solvent No. 646. You can safely buy it - airbrush on helmets will be very good.

Solvents

As for solvents, there are both "light" and "heavy" - it all depends on the speed of evaporation. The first consists of ethers. Such solvents evaporate almost instantly. And "heavy" contain substances such as xylene, toluene, benzene, as well as oily elements. All this contributes to a longer evaporation. As a rule, 647th as well as 646th number of solvent are used for airbrushing. In addition, acetone is used. Take this into consideration if you want the airbrush on the goalkeeper's helmet to turn out beautiful. Do not neglect these recommendations.

Paints

Nitro-colors can be used for aerography. Already in the process of drawing a person is determined with their consistency. Also, special paints can be used for this type of creativity. Where can they be bought? As a rule, they are found in art salons and special shops.

The process of drawing with the help of an airbrush

If you are a beginner, you can not hope that you will get a beautiful image from the first time. Perhaps you will have to paint a few helmets, and only after that you will start everything. At first, it is recommended to draw with the use of a stencil. Consider how to draw a flame. Three colors are used to perform this pattern.

1. So, airbrushing will be done on the helmet with our own hands. Therefore, the first point is predictable. It is necessary to take a helmet.
2. Next, you need to cut out of a thick cardboard a number of patterns, their shape can be any. Now the color of the lemon color is poured into the airbrush. And further - the most important thing. It is necessary to apply the initial layers of the colorant, using templates. They should not be firmly pressed to the helmet, it is recommended to keep them at some distance - let the distance be 5-10 mm.
3. Now the airbrush should be washed properly and then poured into the scarlet paint. It is designed to draw the middle of the fire. After applying the paint, it is easy to remove excess paper with a paper handkerchief or brush. Sprains or hairs can get on the helmet. Do not remove them immediately - you should wait until the paint stiffens, and then remove them with a sharp needle. Do it very carefully. Aerography on helmets must be carried out without a single flaw.
4. Now you need to pour white paint into the airbrush. By means of it the lower part of the flame is represented.
5. At the last stage, when the helmet dries, you should remove the excess paint the final time, and then cover the pattern with varnish, which will protect it from all sorts of damages. In addition, the image will become more beautiful and expressive.

Recommendations for drawing with airbrush

1. Always place the device perpendicular to the helmet.
2. In order to prevent streaks, the device must move continuously. The best option is to create a picture in one approach. So can experienced specialists. It is better to cover the helmet with just one coat of paint.