How to store rubber without wheels in winter or summer? Proper storage of car rubber without wheels

Twice a year, cars "change their shoes," and before their owners the question arises: "How to store rubber?" Tires do not like the effects of sunlight, ultraviolet, moisture and sudden temperature changes. In addition, they are prone to deformation. In general, these are fragile products that require a special approach. Therefore, the storage of rubber without wheels becomes a very difficult task for many motorists.

Step one: choosing the right place

Where will the rubber be stored? This is the first question to which the owner of the car should answer himself. In fact, everything is not so simple as it seems at first glance. Storing rubber can be a big problem in the absence of a suitable place. The room should be relatively constant temperature, sudden changes are disastrous for tires. Optimum when the room is from +10 ° C to +25 ° C. The upper lath is +35 ° C.

Another important parameter is humidity. The optimum level is about 60%. If the tires are in a damp room, they will lose their elasticity from such an impact. To overdry too it is undesirable, tk. Rubber can crack.

Also, the room should be protected from ultraviolet radiation and well ventilated.

Optimal places for placing rubber: a heated garage, a pantry in an apartment or house, special tire storage.

Tolerant: glazed balcony, cellar. In both rooms it is necessary to control the temperature and humidity levels. The basement will need to be ventilated regularly. You can also store in attics and in barns.

Long-term storage of rubber is undesirable on an unglazed balcony or under a street canopy.

Mark tires

Before removing it is necessary to indicate where the "shoes" are from each wheel. You can use the marking on the first letters: LP - left front, LZ - left rear. At the next change of rubber it is necessary to consider, where there were tires, and to return them on a place or to exchange places. When they are labeled, it is much easier.

Pre-care

Before leaving the tires for a long time at rest, they need to be subjected to a slight treatment. Thanks to simple operations in six months, the rubber will still be as good as new.

• To wash . Do not leave any tires dirty. They need to be cleaned of dust, oil products, remove all stones from the protectors, etc.
• Dry it . Do not fold the tires wet. Excessive moisture damages the products.
• To process rubber with preserving compounds . They protect the material from premature aging. To apply chemistry it is necessary strictly under the instruction, at non-observance of recommendations of the manufacturer it is possible to damage tires.

How to fold

There is only one recommendation on how to store rubber without discs. Tires should stand upright, next to each other. Only in this case it is possible to avoid deformation. Optimum, if a semicircular surface is used: this will allow to keep the shape perfectly. If the tires stand on a flat shelf or floor, they will need to be turned periodically.

Now consider how to store rubber without discs is not recommended. It is undesirable to place rubber on cables, corners, channels, etc., as there will be only a few points of support, which will lead to uneven load distribution and, as a consequence, deformation.

If you hang on the hooks, then the geometry of the tire will be broken: it will become elongated.

If stacked stacked on top of each other, the lower tires can be flattened somewhat. Subsequently, they will be difficult to establish. This is especially true for fine rubber.

General storage conditions

It is important to observe a number of other conditions to avoid problems. So, how to store rubber to avoid premature aging:

• Do not hold tires on a wet or frozen surface - only on a dry clean floor or shelf.
• It is inadmissible to have prolonged contact with gasoline, diesel fuel, or other petroleum products.
• It is not recommended to place tires near heat radiators and other sources of heat, as well as near a fire and sources of sparks, for example, a working welder.
• Avoid exposure to chemicals, paints, varnishes and solvents. It is desirable to keep all aggressive substances in another room or at a considerable distance.
• The room should not have increased ozonation.

The controversial issue of polyethylene

This item is for those who do not know how to store rubber without discs on the balcony. Someone strongly recommends wrapping tires in dark bags, someone says about the harm of polyethylene. In fact, the answer is simple. Harmful is not so much cellophane itself, as the condensate formed on its inner surface. To avoid the appearance of moisture in the bag, you need to close it loosely so that air can circulate.

Dark polyethylene can become a good assistant when storing rubber on the balcony: it will protect tires from UV radiation. If the tires lie in a dark and dry room, then the bags are not needed.

Currently, special covers are sold, which can be used instead of polyethylene. It will be somewhat more expensive, but such a "wrapper" is more durable, and the storage conditions will be met. Covers are made of dense dark materials that do not allow sunlight, but are "breathing". In this case, condensation does not appear.

How to store tires for winter roads?

Winter tires without wheels require a special approach. First of all, this concerns the temperature regime. It should be in a cool place, t. Each type of tire should be stored in conditions close to the operating conditions. Therefore, it should not only be protected from sunlight, but also from overheating. Driving on the ice requires a lot of softness from the rubber, and when heated, it rocks. "Oak" tire can not provide high-quality adhesion to the surface.

Whether there is a sense to hand over rubber in a specialized warehouse?

If there is absolutely no place to put tires on, then you can contact specialized tire storage. In large cities, there are many such services. Usually people here know how to store rubber properly. But it's better not to be too lazy to inspect the premises yourself where the tires will lie, to find out whether there is any necessary equipment: semicircular shelves, racks, hooks, etc. It would be nice to check the compliance of the declared humidity and temperature regimes with real indicators.

You also need to carefully study the contract, see what guarantees the warehouse gives, what will be done in case of loss or damage to property. Do not trust those firms that do not provide safety of tires or work without a contract, but simply by check.

On this you can complete the guide on how to store rubber without disks. Nothing difficult here, if you find a suitable room.